Genuine OEM Jacuzzi® ProClear® 50 Sq Ft filter cartridge designed for J-200 Series spas built from 2005–2022. Delivers premium water clarity using Reemay® pleated filtration media for superior debris capture. Fits J-210 (2005–2022), J-220 (2005–2008), J-230 (2005–2007), J-235/245/275 (2012–2022), and J-215/225/235/245 (2016–2022). Universal open-end design with 2⅛″ (~2.25″) openings on top and bottom for easy drop-in replacement. Measures approximately 13.31″ length × 4.94″ diameter to OEM specifications. Recommended replacement every 12–18 months for optimal filtration performance. Protects spa components by maintaining consistent water flow and clarity.

OEM flow switch assembly with transparent Tee housing (part #6560‑860) for spa circulation detection Includes 3/4″ barbed inlet/outlet and 3/8″ side barb for streamlined plumbing Replaces part #6560‑858 and integrates easily via box-end wiring harness Compatible with Sundance® 800/850/880 Series (1999+), Capri (2001+), J‑300 (2002+), and select models of 680/680 Hartford/Burlington as listed Helps trigger heater activation and prevent “Solid Flo” or “Flashing Flo” errors Durable plastic construction and ready-made wiring for easy DIY replacement

The Jacuzzi® J‑400 Series Adjustable Headrest Slider (part # 2570‑401) is an essential OEM component crafted for ultimate comfort and durability, compatible with J‑400 Series spas from 2006–2016: Original equipment replacement ensuring perfect fit and performance Adjusts pillow position for ergonomic head support across spa models J‑415, J‑425, J‑460, J‑465, J‑470, J‑480, J‑495 Crafted from spa‑grade materials for reliable longevity—even in hot, wet conditions Replaces Jacuzzi part # 20163‑001 and aftermarket SD2570‑401 Easy snap‑in installation—no tools required

Specifically designed for Jacuzzi® J-200, J-300, J-400, J-LX, and J-500 series hot tubs Holds both FROG® @ease Mineral and SmartChlor® cartridges together for dual sanitization Floats conveniently in the spa water, clipping onto the filter cartridge for easy access Reduces chlorine use by up to 75% while keeping water clean, clear, and silky smooth Made of durable plastic that resists UV exposure and harsh spa chemicals No tools or adapters required—installs in seconds and works with most Jacuzzi models SmartChlor cartridge lasts 3–4 weeks; Mineral cartridge lasts up to 4 months Genuine Jacuzzi® replacement part #6473-333; cartridges sold separately

OEM Jacuzzi® ProClear® II filter cartridge (#2540‑387) offers 35 sq ft of pleated Reemay® filtration media in a compact, threaded format Designed specifically for use under the ProPolish® bag in J‑465™, J‑470™, and J‑480™ spas manufactured 2009–2012, operating with Jet Pump 1 Measures approximately 4.75″ diameter × 12.5″ length, featuring a blind‑end top with an integrated handle, and a 2.375″ coarse-threaded connection at the base for secure installation Built as a disposable cartridge—do not rinse or reuse; replace every 3–4 months to maintain optimal flow and clarity Ideal for removing oils, lotions, and fine debris that can degrade spa performance and water quality Compact size makes it easy to replace while preserving high-quality filtration in per-model Jacuzzi® systems

Official Jacuzzi® HYDROSOOTHE pillow (part #2472‑135) engineered for the J‑300™ Collection spa models from 2020 onward Delivers gentle pulsating hydrotherapy massage to the neck and shoulders via integrated jets, enhancing relaxation during spa use Crafted with ergonomic foam and spa-grade, water-resistant vinyl for comfort, durability, and chemical resistance Precision-engineered OEM fit ensures easy screw-on installation using provided hardware (sold separately) Compact design measures approximately 11″ × 5″ × 3″, lightweight at ~0.3 lb, and made to factory specifications

The Jacuzzi® ProClarity Mesh Skimmer Debris Bag (6570‑392) is a genuine OEM accessory designed to enhance your spa’s skimmer performance by trapping surface debris before it reaches the main filter. Ideal for J‑LX/LXL (2011+) and J‑300 (2002–2013) series spas, this mesh bag installs with seven clip holes—six around the rim and one bottom hole—for stable fitment and reliable operation. Compatible with J‑LX/LXL (2011+) and J‑300 (2002–2013) spas Seven clip‑in holes (6 top, 1 bottom) ensure secure attachment Fine mesh material captures leaves, bugs, and floating debris OEM Jacuzzi part (#6570‑392) guarantees precise fit and quality Easy maintenance—simply remove, rinse, and reinstall Lightweight and reusable, reducing filter strain and extending service intervals

OEM back-mount bracket for Jacuzzi® J‑300 series spas, designed for models built from 2002 to 2006 (non-lit versions) Retains the front pillow insert, allowing a customizable headrest assembly with interchangeable inserts Durable dark gray plastic construction resists spa chemicals and daily use Measures approximately 10¼" × 4½", matching original shell receptacle dimensions for a perfect fit Snap-in design allows easy install and removal without tools, perfectly aligning with spa shell Compatible with front inserts: 6455‑007 (2002–2006), 2455‑104 (2007–2013), and 6455‑488 (2014+) Ideal replacement for broken or worn-out brackets to restore original headrest comfort and support Fits all J‑300 models (J‑310 to J‑385) through 2006, and remains compatible with later inserts

The Jacuzzi® ProPolish Filter Bag (part # 2540‑389) is an OEM-quality mesh bag made to pre-filter large debris before it reaches your spa’s cartridge, preserving equipment and improving maintenance: Designed for Jacuzzi J‑400 Series hot tubs (2006–2012; excludes J‑495, J‑425, J‑415) Replaces older filter bag part numbers 6540‑512, 6540‑513, 20076‑001, 6540‑496 Dimensions: 6.26" × 7.913" × 5.157" Durable, reusable mesh; hand‑wash only (dish soap + triple‑rinse); lasts about two seasons Helps maintain water flow, prolong cartridge life, and reduce cleaning frequency OEM-grade build, backed by Jacuzzi dealer support (wear‑and‑tear not covered)

OEM temperature sensor replacement O‑ring designed for Sundance® and Jacuzzi® spa systems Fits all temperature sensors produced from 2002 onward (models 6600‑166, 6600‑167, 6600‑181, 6600‑751) Made of EDPM material with a Teflon coating (0.662 in inner diameter × 0.210 in thickness) for a precise, moisture‑resistant seal Ensures accurate temperature readings and helps prevent leaks around sensor housing Compact, single‑unit design for easy installation or replacement Extends sensor life and maintains reliable spa temperature control

Teak-tone stainless MOD screw (8 × 1-5/8) for Sundance® spa pillows and brackets. Rust-resistant and color-matched for discrete installation. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

OEM replacement pillow specifically designed for Jacuzzi® J‑500 series spa models (J‑575/J‑585 from 2015+) and compatible with J‑LX/L‑XL spas (2023+) Molded headrest crafted from high-density, water-resistant foam with a durable vinyl cover to withstand spa environments Ergonomic contoured design cradles the neck and shoulders, enhancing relaxation during spa sessions Snaps securely into spa shell via integrated receptacle—no tools required and easy to remove for cleaning or replacement Measures approximately 12.5" × 5.5" × 2" and weighs about 0.29 lb—lightweight yet supportive OEM-grade fit and finish ensures seamless integration with original spa design and aesthetics Restores comfort to worn or faded factory pillows, renewing the feel of your spa New part #2472‑005 replaces previous #2455‑266 for consistent compatibility and performance

OEM HydroSoothe™ massage pillow kit for 2020+ J‑300 Collection spa models, offering targeted hydrotherapy via integrated back jets Complete assembly includes pillow, inner ring, outer ring, two bushings, and two nylon wing nuts for secure rear mounting High-density, water-resistant foam cushion encased in spa-grade vinyl; designed to withstand spa chemicals and daily use Measures approximately 11" × 5" × 3" and weighs about 0.55 lb (per manufacturer spec) Designed for rear-panel access only—removal requires loosening wing nuts through cabinet panel (not from front) Approved by Jacuzzi to enhance comfort, relieve neck tension, and maintain ergonomic head support during spa use Simple install and replacement once cabinet panel is removed—no specialized tools required beyond a nut driver Restores full functionality and hydrotherapy benefits to original spa configuration

Designed to work exclusively with the FROG® @ease 2-in-1 Water Care System used in Jacuzzi® Hot Tubs. Securely holds both the SmartChlor® and mineral cartridges in one streamlined floating unit. Makes spa maintenance easy by allowing cartridges to float freely while maintaining consistent sanitizer levels. Durable plastic construction resists fading, spa chemicals, and UV exposure for long-term performance. Reusable and long-lasting—only the cartridges need to be replaced every few weeks or months. Simple snap-in design allows for quick and easy installation without tools or complicated instructions. Compatible with Jacuzzi® hot tubs that feature the FROG @ease water care system; not intended for swim spas or other spa brands. Helps maintain crystal-clear, low-odor water with reduced chlorine usage and less frequent maintenance. Compatible with the following cartridges: FROG @ease 2-in-1 Water Care™ Floating System FROG® @ease® System for Jacuzzi Hot Tubs FROG® @ease® System for Sundance Spas  

OEM plastic attachment screw (Part #6570‑231) used to securely mount spa pillow headrests, including Sweetwater® and Portofino® series Compatible with Sweetwater spas (2003 +), Sundance® Portofino series (2001 +), and Jacuzzi® J‑300 Series (2002 +), and works with pillow insert #6455‑007 Screw head measures approximately 13/16″ diameter and an overall length of 1 ⅞″ for perfect fit in OEM pillow hardware Made from durable, corrosion-resistant Norlyn plastic that withstands spa chemicals and humid environments Requires two screws per pillow installation for stable attachment Ideal replacement part to restore pillow alignment and prevent flipping or detachment Fits Sundance® Sweetwater spas (2003 and newer) Fits Sundance® / Portofino spas (2001 and newer) Compatible with pillow insert #6455-007 OEM part (Part #6570-231) ensures perfect thread match and secure hold

Designed specifically for Jacuzzi J‑300 series spas (2014–2019), this pillow insert (#6455‑488) features an oval, ergonomic shape that enhances neck and head support during long soak sessions. Optimized dimensions of 11.25″ × 5″ × 1.75″ complement the original spa shell design and ensure a seamless fit. Built with high-density, water-resistant foam, it resists water, chemicals, and mildew, preserving comfort and longevity. Finished in spa-grade grey with an embossed Jacuzzi logo, delivering both function and factory-aligned aesthetics. Installs easily by snapping into the 2455‑105 bracket—no tools needed. Replace the old insert quickly for refreshed comfort and renewed spa enjoyment.

OEM extended-tip temperature sensor with a 3-pin connector and 2-wire design, used in modern Sundance®/Jacuzzi® spa control systems. Introduced February 9, 2022, as the replacement for recalled part #6600‑533. Precision-engineered to provide accurate water temperature readings for proper spa operation. Designed for use in 680, 780, 880, and 980 Series Sundance spas built after Feb 2022—as well as select J-200 to J-500 Jacuzzi models from April 2015+. Does not include O-ring (part #6540‑228) — O-ring must be purchased separately. Essential component for maintaining correct water temperature control and safe spa performance.

Authentic Jacuzzi® ProClear II filter cartridge (45 sq ft) for circulation systems in J‑460 (2006–2011) and J‑465 (Jan–Apr 2007) spas Premium woven Reemay® filter media provides deep debris capture and extended flow life Includes twist-on cap compatible with ProClear mineral sanitizer sticks without removing the filter Measures approx. 6" diameter × 13.5" length with 2.375" SAE threaded bottom port; top handle for easy removal Disposable design—recommended replacement every 12–18 months or if flow rate significantly drops

OEM replacement cartridge offering 25 square feet of pleated media designed for older Jacuzzi hot tubs (pre‑2002 models) Measures approximately 10.45″ high with a 5.75″ outer diameter and a 2.125″ open bottom for standard filter housing Closed top featuring a string handle for easy removal and installation Blind-end design compatible with ProPolish back‑wash filter bags used in select Jacuzzi models High-efficiency media captures debris, oils, and contaminants to maintain clear, clean water Durable and chemical-resistant construction allows for repeated wash cycles Fits and replaces part numbers: C‑5601, FC‑1330, PJW23, and other equivalents Simple to replace—just remove old cartridge and insert the new one to optimize filtration

OEM slide-on oval spa pillow for Jacuzzi® J‑300 series hot tubs built from 2007 through 2013 Includes both back-mount bracket (part #2455‑105) and insert with translucent logo insert (part #2455‑104) compatible with LED lighting systems Made of high-density foam and spa-grade vinyl for comfort and durability Dimensions: insert approx. 9" × 4.25"; bracket approx. 10.38" × 4.75" Mounts via slide-in/bracket system—no tools needed Provides ergonomic neck and head support, helping soak sessions feel more relaxing Restores OEM aesthetics with gray finish and LED backlight feature Compatible with late-model J‑300 tubs and newer units needing updated comfort support

OEM front pillow insert for Jacuzzi® J‑300 Series spas manufactured between 2007–2013 Made from high-density foam with spa-grade vinyl, featuring a translucent Jacuzzi® logo for LED-backlit systems Measures approximately 9" W × 4.25" H × ~1.25" D; designed to fit into back-mount bracket (#2455‑105) Compatible with both lighted and non-lighted headshells, replacing older non-lit insert #6455‑007 Easy snap-in installation—just press into the bracket until secure; no tools required Restores comfort and style to worn or faded headrests, renewing spa aesthetics Genuine OEM part, also included in full pillow assembly #2472‑826

OEM slide-on spa pillow designed for Jacuzzi® J‑400 series models built from 2006 through mid‑2009 Crafted from high-density, water-resistant foam with spa-grade vinyl cover for durability and comfort Measures approximately 10¼" W × 5" H × ~2.4" D—fits sliding base (slider part #2570‑401) into standard J-400 shell receptacles Provides ergonomic head and neck support, helping maintain relaxation posture during soak sessions Smooth gray finish matches original spa aesthetics and resists spa chemical exposure Snaps onto slide-base securely—no tools required, and easy to remove for cleaning or replacement Compatible with early J‑400 models lacking LED backlit headrest; replaceable sliding pillow slider sold separately Direct OEM replacement for pillow part #2472‑822 (formerly 20152‑001)

OEM-style oval spa pillow (part #2472‑831) featuring two rear snap‑in posts for precise alignment in Jacuzzi® J‑215 and J‑225 models, 2016 and newer Measures approximately 10.5″ × 5.5″, contoured shape provides head and neck support for ergonomic comfort Covered in soft, UV- and chemical-resistant vinyl for long-lasting spa-safe durability Simple installation—snap into molded posts without any tools; removal is just as easy Available in neutral grey tone that matches factory spa interiors; direct replacement for previous part #6455‑487 Ideal for replacing worn-out or faded headrests across both seating positions

Front-removable HydroSoothe™ massage pillow designed for 2020 and newer Jacuzzi® J‑300 Collection spas Offers built-in hydrotherapy massage jets that target neck and upper shoulder tension Complete OEM assembly includes gray foam pillow, inner and outer rings, bushings, mounting studs, snap rings, and two nylon wing nuts Easily removable from the front of the spa without accessing the rear cabinet, unlike older models Made from high-density, water-resistant foam wrapped in spa-grade vinyl for long-lasting durability Ergonomic contoured design provides both comfort and targeted massage support Measures approximately 11" × 5" × 3" and weighs about 0.60 lb Replaces previous part #2472‑136, offering improved installation and maintenance convenience