100002 | CoverMate Foam Grip
Leisure Concepts™ 100002 | CoverMate Foam Grip $15.00
Compatible with the Covermate I, Covermate II, Covermate III, etc. Comes as a set of 1 (1 foam grip) OEM #100002
100004 | Covermate I | Left or Right Pivot Arm
Leisure Concepts™ 100004 | Covermate I | Left or Right Pivot Arm $48.95
Designed for the Leisure Concepts – Covermate I system Arm is interchangeable as the left or right side OEM part #100004 The Leisure Concept's Covermate I pivot arm is now easy to purchase just as simple as easy to install. Things happen like weather, accidental misuse, etc. Why call a technician or a contractor to replace the pivot arm when you can easily remove the screws and install the new Leisure Concept's Covermate I pivot arm? This pivot arm is not the same as that used on other lifters - see other parts as this may pertain to you. THE INDUSTRY STANDARD FOR QUALITY AND FUNCTION Step up your cover lift offering with the CoverMate I. This is simply the highest quality and most sold cover lift on the market. Its time-tested performance, attractive appearance and obvious quality is apparent to everyone desiring a no-hassle cover lift.  Enjoy great customer satisfaction with the CoverMate I. FEATURES & SPECS Requires just 10 to 15 inches of clearance behind the spa and 5 inches on each side Available with specialty brackets that are designed specifically for certain spa brands Available with extended pivot arms or extended coupler bar for spas over 8 feet in length or width Available with extended brackets for spas with a corner radius larger than 12 inches Powder-coated aluminum tubing with easy-to-install, non-corrosive composite mounting brackets Comes standard with a TowelMate accessory for hanging up to three towels right where they are needed most
100008 | CoverMate Towelmate
Leisure Concepts™ 100008 | CoverMate Towelmate $18.00
Compatible with the Covermate I, Covermate II, Covermate III, etc. Does not include mounting screws OEM #100008
100028 | CMIII Right Support Arm
Leisure Concepts™ 100028 | CMIII Right Support Arm $60.00
The Leisure Concept’s CMIII Right Support Arm is now easy to purchase just as simple as easy to install. Things happen like weather, accidental misuse, etc. Why call a technician or a contractor to replace the pivot arm when you can easily remove the screws and install the new Leisure Concept’s Covermate III support arm? This support arm is not the same as that used on other lifters – see other parts as this may pertain to you. THE INDUSTRY STANDARD FOR QUALITY AND FUNCTION Step up your cover lift offering with the CoverMate III – CMIII Right Support Arm. This is simply the highest quality and most sold cover lift on the market. Its time-tested performance, attractive appearance and obvious quality is apparent to everyone desiring a no-hassle cover lift.  Enjoy great customer satisfaction with the CoverMate III. The CoverMate III by Leisure Concepts is the perfect answer when clearance behind the spa is an issue. The best hydraulic cover lifter by Leisure Concepts. The CoverMate III requires just 6 inches of clearance behind the spa and 5 inches on each side Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting brackets Euro-styled composite brackets with beauty covers that hide mounting hardware for a clean look Ergonomically designed for ease of use Comes standard with a TowelMate accessory for hanging up to three towels right where they are needed most What makes Leisure Concepts The Smart Choice? One Stop Accessory Source Widest Selection of Stylish Products Superior Quality and Durability 100% Made in the USA
100029 | CMIII Left Support Arm
Leisure Concepts™ 100029 | CMIII Left Support Arm $60.00
The Leisure Concept’s CMIII Left Support Arm is now easy to purchase just as simple as easy to install. Things happen like weather, accidental misuse, etc. Why call a technician or a contractor to replace the pivot arm when you can easily remove the screws and install the new Leisure Concept’s Covermate III support arm? This support arm is not the same as that used on other lifters – see other parts as this may pertain to you. THE INDUSTRY STANDARD FOR QUALITY AND FUNCTIONStep up your cover lift offering with the CoverMate III – CMIII Left Support Arm. This is simply the highest quality and most sold cover lift on the market. Its time-tested performance, attractive appearance and obvious quality is apparent to everyone desiring a no-hassle cover lift. Enjoy great customer satisfaction with the CoverMate III.The CoverMate III by Leisure Concepts is the perfect answer when clearance behind the spa is an issue. The best hydraulic cover lifter by Leisure Concepts.The CoverMate III requires just 6 inches of clearance behind the spa and 5 inches on each sidePowder-coated, aluminum tubing with easy-to-install, non-corrosive mounting bracketsEuro-styled composite brackets with beauty covers that hide mounting hardware for a clean lookErgonomically designed for ease of useComes standard with a TowelMate accessory for hanging up to three towels right where they are needed mostWhat makes Leisure Concepts The Smart Choice?One Stop Accessory SourceWidest Selection of Stylish ProductsSuperior Quality and Durability100% Made in the USA
100150 | Safe-T Rail Foam Grip
Leisure Concepts™ 100150 | Safe-T Rail Foam Grip $25.00
100150 | Safe-T Rail Foam Grip is easily replaced by customers far and wide. No longer do you need to purchase from a supplier, schedule a tech, wait - when this can be easily done at your convenience in less than 10 minutes! Compatibility Safe-T Rail safe-T Rail II SmartRail Modstep Side Rail Replacement Instructions Using a box cutter or sharp scissors, make an incision across the foam grip (do not scratch the paint / metal bar Remove the end piece of the Rail Apply any solution that will lubricate the rail (do not use corrosive or harsh products) Slide the new foam grip into the position you desire
100269 | Covermate I Sundance Bracket Kit
Leisure Concepts™ 100269 | Covermate I Sundance Bracket Kit $125.00
The Leisure Concept's Covermate I Sundance Bracket Kit is now easy to purchase just as simple as easy to install. Things happen like weather, accidental misuse, etc. Why call a technician or a contractor to replace bits and pieces of your Covermate I? Note: Covermate I Sundance Bracket Kit is the aluminum version Looking for a sturdier, stronger system with a locking mechanism, check out the Covermate III by Leisure Concepts ! THE INDUSTRY STANDARD FOR QUALITY AND FUNCTION Step up your cover lift offering with the CoverMate I. This is simply the highest quality and most sold cover lift on the market. Its time-tested performance, attractive appearance and obvious quality is apparent to everyone desiring a no-hassle cover lift.  Enjoy great customer satisfaction with the CoverMate I. FEATURES & SPECS Requires just 10 to 15 inches of clearance behind the spa and 5 inches on each side Available with specialty brackets that are designed specifically for certain spa brands Available with extended pivot arms or extended coupler bar for spas over 8 feet in length or width Available with extended brackets for spas with a corner radius larger than 12 inches Powder-coated aluminum tubing with easy-to-install, non-corrosive composite mounting brackets Comes standard with a TowelMate accessory for hanging up to three towels right where they are needed most  
100503 | Covermate III Plastic - Left Mounting Bracket
Leisure Concepts™ 100503 | Covermate III Plastic - Left Mounting Bracket $75.00
Designed for the Leisure Concepts – Covermate III Plastic system Standing in front of your spa (the cover folding away from you), this would be the left side mounting bracket OEM part #100503Covermate III Plastic Installation Instructions As a reminder, the locking shock must be disengaged (pressing and holding the red button). Failure to disengage the locking shock piston may lead to damage to the locking shock, bracket, and/or spa.  [embed]https://www.youtube.com/watch?v=AVAXq-KSdYk[/embed]
100504 | Covermate III Plastic - Right Mounting Bracket
Leisure Concepts™ 100504 | Covermate III Plastic - Right Mounting Bracket $75.00
Designed for the Leisure Concepts – Covermate III Plastic system Standing in front of your spa (the cover folding away from you), this would be the rightside mounting bracket OEM part #100504 As a reminder, the locking shock must be disengaged (pressing and holding the red button). Failure to disengage the locking shock piston may lead to damage to the locking shock, bracket, and/or spa.  [embed]https://www.youtube.com/watch?v=AVAXq-KSdYk[/embed]
101510 |  Compression Damped Non-locking Shock 75#
Leisure Concepts™ 101510 | Compression Damped Non-locking Shock 75# $36.99
Replacement compression damped non-locking shock – lift. 75 lb. OEM #101510from Leisure Concepts Replaces old part #100245 To see if your lifter is compatible, visit https://leisureconcepts.com/installation-instructions/
Sold out
101632 | Compression Damped Locking Shock 75#
Leisure Concepts™ 101632 | Compression Damped Locking Shock 75# $49.95
Replacement locking shock/strut for CoverMate 3 spa cover lift. 75 lb. Features red button type locking mechanism. OEM #101632 from Leisure Concepts Leisure Concepts is happy to introduce a new type of locking mechanism for your Leisure Concepts lifter system: the Compression Damped Locking Shock 75# | 101632 . With a red-tab to make the piston stand-out, simply press the tab and lower your cover slowly.  This piston allows you to sit and relax in your spa – confident that your cover will stay locked into position behind you. This is not the same piston as the non-locking shock. How strong is the locking shock? Watch the video below to find out: https://www.youtube.com/embed/AVAXq-KSdYk
UltraLift Foam Grip
Ultralift™ UltraLift Foam Grip $14.50
Original factory replacement Ultralift foam grip Easy to remove and easy to replace Standard UltraLift lifter systems utilize quantity=2 OEM #L831 With UltraLift, where can you go wrong? Cover Lifters is what they do. No need to purchase 3rd party or custom made foam grips when you can purchase it directly from the manufacturer themselves? The UltraLift Foam Grip is meant to be universal on most UltraLift lifter systems. When you start noticing that your UltraLift Foam Grip is starting to wear-and tear, why not spend the extra minute switching them out. If you have a CMI, CMII, CMIII, or any lifter system manufacturer and produced by Leisure Concepts, this is the incorrect foam grip. You will need the CoverMate Foam Grip 100002.     Who is ULTRALIFT? Ultralift’s focus is to design and deliver the best hot tub cover lifters and lifter system accessories. With our Visionlift, we were the first company to bring you a 360-degree view from your spa. We are first to launch an undermount system with hydraulic assistance. We are passionate about what we do and proud to be designed, packaged and manufactured in North America. Our innovative patented sliding bracket streamlines the installation process and accommodates various makes and models of spas.  For 2020 we are launching a new installation video series and redesigned manuals to ensure an effortless installation every time. Our all metal design is sturdy, and winter approved and is backed by a limited lifetime warranty. We are a cover lifter company. It’s what we do.