Front-removable HydroSoothe™ massage pillow designed for 2020 and newer Jacuzzi® J‑300 Collection spas Offers built-in hydrotherapy massage jets that target neck and upper shoulder tension Complete OEM assembly includes gray foam pillow, inner and outer rings, bushings, mounting studs, snap rings, and two nylon wing nuts Easily removable from the front of the spa without accessing the rear cabinet, unlike older models Made from high-density, water-resistant foam wrapped in spa-grade vinyl for long-lasting durability Ergonomic contoured design provides both comfort and targeted massage support Measures approximately 11" × 5" × 3" and weighs about 0.60 lb Replaces previous part #2472‑136, offering improved installation and maintenance convenience

OEM 50 sq ft pleated cartridge filter for Jacuzzi® swim spas Designed for dual-filter systems found in J-14, J-16, J-19 series Captures fine debris to support water clarity and system efficiency Easy pull-and-replace design—rinse monthly, replace as needed Helps reduce chemical usage and prolong pump health

Upgrade your spa's filtration performance with this genuine Jacuzzi® ProClear® 75 sq ft filter cartridge. Replaces the older part #2000‑286 and comes with a twist-off cap compatible with mineral sanitizer sticks. Built with premium trilobal polyester media, it delivers clear, pristine water while fitting seamlessly into ProClear® II systems. 75 sq ft filtration area for thorough debris removal Includes removable top cap for easy installation of mineral sanitation Trilobal polyester media enhances filtration efficiency OEM Jacuzzi part ensures proper fit for ProClear® II systems Replaces old part #2000‑286 for model year support Optional Replacement for 6000-383AJ

OEM nano air filter cartridge designed for Jacuzzi® True™ Water Management systems introduced in 2024+, including J‑LXL, J‑LX, J‑300, and J‑400 series spas. Filters and dries intake air, protecting nanobubble and ozone subsystems to ensure efficient operation and water clarity. Transparent bead-filled chamber lets you visually monitor filter life—the beads turn from blue to pink when replacement is needed. Easy twist-and-pull installation; remove protective end caps then seat cartridge in the True™ system housing. Typical service interval is every 4–6 months; SmartTub® system will notify you when it's time. OEM quality ensures a precise fit and maintains warranty compliance for True™ systems.

Genuine OEM Jacuzzi® ProClarity™ assembly built to factory specs. Includes 40 sq ft pleated top filter (6473‑157) + depth‑load filter (6473‑161) + locking pin + housing canister. Improves water clarity by capturing fine particles before water returns to spa. Quarterly depth-load filter replacement; rinse pleated filter regularly. Ideal for J‑400 (2012+), J‑495, J‑425, J‑465, J‑415, J‑480, J‑470; retrofits some J‑300 and J‑LX models. Specs: 6.40″ × 6.45″ × 18.15″; weight ~ 4 lb.

OEM temperature sensor designed for Jacuzzi® and Sundance® spa systems using a box-end connector. Includes a 12-foot cable, allowing flexible routing to the control board without extensions or splicing. Stainless-steel sensor head delivers precise water temperature readings and reliable performance. Compatible with Jacuzzi® J‑300 and J‑400 Series spas (2002–2006) and Sundance® 880 Series (2005+) systems. Also fits older Sundance models from 1992 onward and replaces legacy sensors including 6600‑105, 6600‑134, and 6600‑138. Installs into the filter reservoir; requires O‑ring part #6540‑228 (sold separately). Plug-and-play installation using the factory-style box-end connector—no wiring skills needed. Ensures accurate temperature control and communication with spa controls and safety systems.

Genuine Sundance® & Jacuzzi® OEM small mesh filter cover designed for select spas manufactured between 1997 and 2003 Protects the filter cartridge by preventing large debris and foreign objects from entering the filtration system Durable mesh material resists wear and tear from repeated use and water exposure Ensures proper water flow while keeping spa filters cleaner for longer periods Easy to install and remove without tools, making routine maintenance quick and hassle-free Designed to fit specific Sundance® and Jacuzzi® spa models; always verify compatibility before purchase Helps prolong the life of your filter cartridge and maintain optimal water quality

OEM short-tip temperature sensor (#6600‑166) with curled-finger connector, designed for jacuzzi and sundance spas. Stainless steel sensor housing with 12-foot lead wire ensures accurate temperature readings. Compatible with a wide range of models: J‑200, J‑300, J‑310–340, J‑365–385, Solo, 701, 724, 680, 780/850E, Sweetwater, Portofino, Del Sol, J‑LX/LXL, and more. Designed to replace older sensors such as 6600‑070 and 6000‑021, with enduring OEM reliability. Rugged build stands up to typical spa conditions—no returns accepted due to electronic part regulations.

Jacuzzi® PHD stainless screw (8 × 1-5/8) in teak finish. OEM replacement for securing spa headrests, trim, and accessories. Rust-resistant, color-blended. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

Mahogany PHD stainless screw (8 × 1-5/8) for Jacuzzi® spa shell and pillow components. Factory part color-matched for a polished install. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

The Sundance®/Jacuzzi® 3/4″ Flow Switch (part # 2560‑040) is a critical OEM safety part: Designed for Sundance and Jacuzzi spa models from 2001–2016 Activates only when adequate flow is detected; prevents heater burn-out Includes 3/4″ slip Tee, switch, and attached 2‑pin cable (~18″ long) Compatible with Tecmark TFS303 (3040‑303) and Sundance 6560‑860 Used with 2-speed circulation systems or when replacing ozone-loop switches Easily mounts between heater and plumbing line

OEM Jacuzzi® PROCLARITY® Depth Load Filter Cartridge (part #6473‑158) featuring ultra‑dense microfiber media for ultra-fine particle removal Designed for use in Jacuzzi® J‑465, J‑470, and J‑480 spas with PROCLARITY filtration systems (2012 and newer) 50 sq ft of filtration area; captures microscopic debris missed by standard cartridge filters Disposable design: do not rinse or attempt to clean; replace every 3–4 months for peak performance

OEM Jacuzzi® replacement ProClear II pleated cartridge, engineered for high-efficiency filtration in J‑400, J‑460, and J‑465 series Captures debris, oils, and contaminants with 25 sq ft of media area for superior water clarity Blind-end design fits under ProPolish bag systems used in 2009–2012 J‑460/J‑465 models and earlier J‑400 series Durable construction withstands spa chemicals and repeated cleanings Easy to install – simply remove old cartridge and insert new one; fits cages with 2.375″ hole Cartridge dimensions: 4.75″ diameter × 8″ length (excluding handle); 2.375″ threaded base Maintains optimal water flow and extends pump life by reducing strain Ideal for hot tub owners wanting reliable, OEM-grade filtration performance

Genuine Jacuzzi® skimmer shield for J‑200 spas (2023+ Platinum color) Protects skimmer basket and plumbing from debris and UV damage Precision-molded to match spa OEM dimensions and color finish Heavy-duty ABS plastic ensures rugged durability and longevity Easy snap-on installation with no tools required Helps maintain optimal water flow and filtration efficiency Skimmer Shield for J-200 Series modes. Used on Applicable Models in the J-200 Series from 2023+

Genuine Jacuzzi® brand replacement skimmer weir filter, part #6540‑188 Specifically designed for J‑LX and J‑LXL hot tub models manufactured from 2011 to present Regulates water flow into the skimmer and filter area, helping maintain efficient debris capture Floating flap design improves surface water circulation and optimizes filter performance Molded from UV- and chemical-resistant plastic for long-term durability in spa environments Helps prevent debris from floating back into the spa when the pump is turned off Easy to install—simply slides into the skimmer housing, no tools required Essential for maintaining optimal filtration and clean water in Jacuzzi® J‑LX and J‑LXL spas

OEM replacement pillow designed specifically for Jacuzzi® J‑200™ spas made from March 2023 onward. Low-profile ergonomic design enhances neck and head support for a comfortable spa experience. Wrapped in spa-grade gray vinyl with corrosion-resistant internal support for durability. Two-pin snap-in installation fits existing pillow mounts—no tools needed. Replaces legacy pillow (P/N 6455‑457 / 2472‑828) and maintains clean factory aesthetics.

Gray stainless PHD screw (8 × 1-5/8) used in Jacuzzi® spa panels and accessories. Corrosion-resistant for long-lasting hold. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

Designed specifically for the Jacuzzi® J‑200 Collection spas released in March 2023 or later, where it serves as the reusable inner core for 50 sq ft ProClassic filter cartridges. Provides rigid structural integrity and consistent water flow when used with the replaceable outer filter sleeve. Top cap snaps securely into place for easy handling and ensures a tight seal within the filter housing. Made of durable, chemical-resistant plastic to withstand regular spa use. Intended for long-term reuse—only the outer pleated cartridge is replaced during maintenance. Compatible exclusively with filter sleeve ProClassic 50 sq ft cartridges (not included). Helps prevent pump strain and keeps spa plumbing clean by maintaining proper filtration flow. Must be used only with Jacuzzi® J‑200 Collection cartridges; not compatible with earlier or swim spa models.