Bullfrog Spas
Bullfrog® A‑Series Filter Lid Headrest, Black Foam (2016–...
$74.46
Refresh the filter area of your Bullfrog® A‑Series spa (2016–2019) with this OEM Filter Lid Headrest (#60‑00037). Designed with high-density foam and a durable black vinyl cover, it snaps onto the filter housing for enhanced comfort and appearance. Specifically sized for the A‑Series filter lid, it offers neck and back support during spa sessions. Easy to install with a two-peg snap system, it provides a snug replacement for worn or faded originals.
Genuine OEM headrest tailored for the filter lid on A‑Series spas (2016–2019)
High-density foam wrapped in spa-grade black vinyl for durability
Snap-in design with two rear pegs ensures secure, tool-free installation
Provides ergonomic support and restores clean aesthetics to the spa filter area
Made to resist chemicals, UV exposure, and everyday spa use
SpaGuard
SpaGuard Calcium Increaser (12 fl oz)
$9.14
SpaGuard's Calcium Hardness Increaser enables spa owners to increase their calcium hardness with this easy to use granular formula, which will boost your calcium hardness to above the danger zone, where low levels cause extensive corrosion of plumbing, jets, fixtures, and tub surfaces. Calcium Hardness Increaser helps raise the calcium level steadily so you don't get too much calcium and start developing scale build-up and cloudy water.
Leisure Concepts
Leisure Concepts® CoverMate III – Hydraulic Spa Cover Lifter
from
$11.25
Premium hydraulic-assisted spa cover lifter designed for effortless one-handed operation.
Equipped with dual gas shocks that provide smooth lifting and lowering motion.
Ideal for recessed spa decks or tight installation spaces thanks to its low-profile design.
Requires just 6 inches of rear clearance and 5 inches of side clearance, making it a great choice for smaller patios.
Choose from cabinet-mount or under-mount versions depending on your spa setup (under-mount base sold separately).
Built from powder-coated aluminum tubing and stainless-steel hardware for long-lasting outdoor durability.
Ergonomic, locking handle keeps the cover secure when in the open position.
Helps prolong the life of your spa cover by reducing stress, sagging, and moisture retention.
Jacuzzi Hot Tubs
Jacuzzi® PROCLARITY® 40 Sq Ft Primary Filter Cartridge – ...
$87.89
Genuine Jacuzzi® PROCLARITY® 40 sq ft pleated primary filter cartridge (part #6473‑157J) designed for ProClarity® filter systems
Fully washable Reemay® media provides deep filtration of oils, sediments, and medium‑sized debris for extended flow life
Fits Jacuzzi® J‑495, J‑425, J‑415 (2012+), J‑465, J‑470, J‑480 (2013+), J‑500 (2015+), and select J‑300 Collection spas with ProClarity® upgrades
Dimensions are approximately 6″ diameter × 8.5″ height with a 2.375″ bottom access hole and easy-grip handle
Rinse and reuse multiple times; replace every 3–6 months or when cleaning reset flow performance
Works in tandem with the disposable depth-load filter #6473‑161J (sold separately) for top-tier water clarity
SpaGuard
SpaGuard Anti Foam (16 fl oz)
$13.99
Quickly eliminates any surface foam caused by undesirable compounds and detergents
For use with all sanitizer types
For use in all spas and hot tubs
Sundance Spas
SunPurity™ Mineral Purifier for Sundance® Spas – part #68...
$40.82
The Sundance® Waterfall Assembly (part # 6890‑780) includes:
OEM replacement for 880 Series spas (2005–2012)
Integrated LED light lens and housing unit
Replaces cracked or discolored waterfall fixtures
Compatible with Optima, Cameo, Majesta, and more
Dimensions: 8.13" × 3.25" × 3.13"; Weight: 0.46 lb
Bullfrog Spas
Bullfrog® Air Comfort Spa Pillow – Black Replacement (200...
$43.65
The Bullfrog® 60-1160 Air Comfort Pillow is a genuine OEM replacement designed for Bullfrog spas manufactured between 2002 and 2008.
It snaps into JetPaks easily, offering a secure, tool-free fit.
The contoured shape provides neck and head support to improve comfort during spa sessions.
Its durable materials resist moisture, wear, and chemical exposure common in spa environments.
The black color blends with many spa interiors and maintains a professional appearance.
Replacing a worn or missing pillow with this restores both comfort and the original look of your spa.
303 Products
303® Multi-Surface Cleaner – 16 fl oz Trigger Spray – par...
$16.95
303® Multi-Surface Cleaner is formulated to tackle everyday dirt, grease, oil, and stubborn stains on vinyl, fabric, and marine surfaces.
Safe for use on a wide range of materials, including boat covers, upholstery, awnings, RV interiors, and patio furniture.
Powerful yet residue-free formula leaves no film behind, restoring surfaces to a clean and fresh condition.
Biodegradable and non-toxic solution that contains no harsh detergents or solvents, making it safe for regular use.
Convenient 16 fl oz trigger spray bottle allows for easy, targeted application and quick cleaning.
Recommended as a pre-cleaner before applying 303® protectants or fabric guards for maximum performance.
Sundance Spas
Sundance® 880 MicroClean Inner Filter (2024+) – part #647...
$73.73
Genuine Sundance® OEM MicroClean Inner Filter designed for 880 Series spas manufactured in 2024 and newer.
Works in tandem with the MicroClean Outer Filter to provide dual-stage water filtration for maximum water purity.
Fine microfiber filter media captures even the smallest particles, oils, and debris to maintain crystal-clear spa water.
Enhances water flow and reduces strain on the pump for efficient circulation and long-lasting performance.
Easy to install and remove, allowing for quick routine maintenance without tools.
Built to withstand exposure to hot water, chemicals, and frequent cleaning for extended service life.
OEM part ensures precise fit and performance compared to aftermarket filters.
303 Products
303® Aerospace Protectant 16 oz – UV Protection for Vinyl...
$16.95
303® Aerospace Protectant is a professional-grade, water-based UV protector originally developed for aerospace and aviation applications. It restores surfaces like vinyl, plastic, rubber, leather, and fiberglass while blocking harmful UV rays. The non-greasy, matte finish repels dust, dirt, and stains—ideal for outdoor gear, spa covers, automotive interiors, and marine equipment. Reapply every 3–5 weeks for ongoing protection.
Blocks UV-induced fading, cracking, and sun damage
Dries to a matte, non-oily finish
Repels dust, lint, and stains
Safe on a wide range of materials: vinyl, rubber, plastic, leather, fiberglass, gelcoat, and carbon fiber
Water-based formula with no petroleum distillates
Easy spray-and-wipe application, professional results
Made in the USA
Bullfrog Spas
Bullfrog® A‑Series Filter Pillow, Granite Foam (2020–2022...
$90.51
Enhance your spa filtration area with this OEM Filter Pillow (#60‑02022) for Bullfrog® A‑Series spas (2020–2022). A thick granite-colored foam pillow that cushions filter lids, reduces rattling, and prevents water splashes. Designed for sandwiched installation, it improves seal efficiency and protects filter housing.
OEM part for A‑Series filter lid covering (2020–2022)
Granite high-density foam reduces vibration and noise
Easy-to-fit design sits within the filter lid housing
Durably resists water exposure, chemicals, and UV
Helps maintain cleaner spa water by preventing lid movement
Jacuzzi Hot Tubs
Jacuzzi® J‑400 Collection Spa Pillow, Black/Grey (2017–Pr...
$62.96
OEM replacement pillow for Jacuzzi® J‑400 Collection spas and select models including J-435 & J-445 (from 10/2017+), J-475 & J-485 (2019+), and all J‑400 models from 2020 onwards
Features contoured ergonomic design crafted from high-density, water-resistant foam with durable vinyl cover for plush neck and head support
Slide‑on installation—no tools required—simply slide the pillow into the integrated shell bracket until securely locks
Measures approximately 13.15" × 9.41" × 1.89" (L × W × H); weighs about 0.24 lb for lightweight comfort
OEM-grade fit and finish matches original spa interior design and durability standards
Restores worn or faded headrests and upgrades comfort on newer models with enhanced support
Replaces previous pillow part number 6455‑031; current PN #2472‑007 includes only the pillow (bracket hardware sold separately)
Compatible with optional grommet (#6540‑543) and nut (#6540‑547) for secure attachment
Bullfrog Spas
Bullfrog® Spa Filter Cartridge – Fits A, R, X Series (201...
$71.88
The Bullfrog® 10-2870 filter cartridge is a genuine OEM Microban®-infused replacement for Bullfrog® spas produced from 2003 onward (excluding STIL models).
It provides 35 square feet of pleated media for efficient filtration and exceptional water clarity.
The filter integrates Microban® antimicrobial protection to resist mold, mildew, and bacterial growth on the media surface.
It features a closed top semi-circular handle and a 2″ SAE coarse threaded bottom for secure fit.
This cartridge replaces earlier models such as 10-1035 and 10-2785 and is compatible with many alternative filter codes (e.g. Pleatco PBF35, Unicel 8CH-950).
Regular use and timely replacement of this cartridge help preserve spa pump and heater life while maintaining water quality.
Hot Tub Things
Hot Tub Things® Filter Cartridge – Compatible with Jacuzz...
$45.95
Premium replacement for the Jacuzzi® ProClear® 60 sq ft HydroFilter, featuring a convenient twist‑off cap to accommodate ProClear® mineral cartridges while filtering.
Compatible with single‑filter systems used in J‑300™ (2002+), J‑400™ (2013+), J‑500™ (2015+), and J‑LX®/L‑XL® (2011–2019 & 2023+) series spas.
Crafted with high‑capacity woven Reemay® media, this filter efficiently removes oils, pollen, and fine debris for exceptionally clear spa water.
Built to precise OEM specs: 15.45 ″ tall, 6.697 ″ diameter, with a 2.375 ″ SAE‑threaded bottom port for a seamless fit Δ
Reusable and user‑friendly—just rinse or soak monthly to refresh performance; typical lifespan is 12–18 months depending on spa usage.
A cost‑effective alternative that delivers authentic Jacuzzi® filtration quality without compromising performance.
Bullfrog Spas
Bullfrog® A-Series NeckMasseuse / NeckBlaster Foam Pillow...
$62.58
The Bullfrog® 60-00072 Pillow is a genuine replacement designed for A-Series spas from 2016 to 2019 and fits NeckMasseuse / NeckBlaster modules.
It is made from dense foam with a spa-grade vinyl cover for comfort and durability in harsh spa conditions.
The contoured design supports the neck and head, enhancing comfort during hydrotherapy sessions.
Installation is simple via a two-peg snap system — no adhesives or tools needed.
The materials are engineered to resist UV exposure, chemicals, and repeated use over time.
Replacing this pillow restores both comfort and the original factory aesthetic of your spa.
Sundance Spas
Sundance® 880 MicroClean Filter Assembly (2024+) – part #...
$155.68
Genuine Sundance® OEM MicroClean Filter Assembly designed for 880 Series spas manufactured in 2024 and newer.
Complete filter assembly includes both the MicroClean Inner Filter (6473-453S) and MicroClean Outer Filter (6473-452S) for a full dual-stage filtration system.
Fine microfiber media and pleated filter construction capture even the smallest particles, oils, and contaminants for exceptional water clarity.
Ensures optimal water flow and efficiency while reducing strain on spa pumps and circulation systems.
Easy to install and replace, providing hassle-free maintenance for your Sundance® spa.
Built to withstand high water temperatures and exposure to spa chemicals for long-lasting durability.
OEM part ensures precise fit and peak performance compared to aftermarket alternatives.
SpaGuard
SpaGuard Enhanced Shock (6 lb)
$92.07
Burn away organic compounds with SpaGuard Shock
SpaGuard Spa Shock-Oxidizer eliminates soluble organic compounds and irritants in spa water. It is buffered to prevent "pH bounce." Regular use helps maintain clear spa water. SpaGuard Shock Oxidizer is not a sanitizer or algicide. To sanitize your hot tub or swim spa, you must still use chlorine, bromine, or minerals. It does not replace the need for regular applications of chemical sanitizers. Shock-Oxidizer restores "spent" sanitizer chloramines, so shocking your hot tub can also cut down on heavy chlorine odor.
Multipurpose shock with four functions: shocks, clarifies, flocculent and pH buffer
Compatible with chlorinated or brominated spas or hot tubs and those using ozone or ionization systems
Restores water sparkle, removes unpleasant odors
Multi-Purpose Chlorinated Shock
Sundance Spas
Sundance® 880 Series Spa Pillow – OEM Gray (2019 +) – Par...
$45.50
OEM high-density foam pillow wrapped in durable gray vinyl, designed specifically for Sundance® 880 Series spas (2019 +) except Marin & Cambria models.
Precise snap-in installation—attaches easily via standard spa shell socket; no brackets or tools required.
Contoured shape provides ergonomic neck and head support to enhance relaxation.
Constructed using spa-safe materials that resist chlorine, bromine, UV exposure, and moisture.
Replaces original part #6455‑025 to restore OEM comfort and style.
Perfect for reviving factory headrests on Altamar, Aspen, Capri, Cameo, Maxxus, and Optima models built from January 23, 2019 onwards.
Authentic replacement ensures exact fit and match to original spa aesthetic.
303 Products
303® Marine Fabric Guard – 16 fl oz Protector for Marine ...
$22.95
303® Marine Fabric Guard is the #1 recommended fabric treatment by Sunbrella®, making it trusted by boat owners and outdoor enthusiasts alike.
Restores lost water and stain repellency to boat covers, bimini tops, sail covers, and outdoor fabrics without altering the fabric’s color, feel, or breathability.
Provides powerful UV protection that prevents fading and extends the lifespan of costly marine and patio fabrics.
Ideal for use on canvas, upholstery, and other water-repellent fabrics, keeping them looking new and performing their best.
Easy-to-use spray application allows for quick coverage and fast drying for hassle-free maintenance.
Safe and effective formula that contains no silicone, fluorocarbons, or harmful chemicals, ensuring long-term protection without residue buildup.
Jacuzzi Hot Tubs
Jacuzzi® Filter Drain Cover Mesh Bag – 5″ Elastic Mesh De...
$8.57
Designed for standard 5″ Jacuzzi/Sundance/Sweetwater spa drains, this elastic-mesh bag (part #6540‑213) captures leaves, hair, bugs, and other debris before they clog filters or damage equipment.
Made from durable, fine polyester mesh with a strong elastic rim that stretches to fit securely around flanged or recessed drains without tools.
Lightweight and compact, it installs easily and is reusable—simply rinse, machine wash, and air dry to keep spa clean.
Fine mesh design maintains full water flow while reducing skimmer load, filter wear, and pump strain caused by large particulate matter.
Affordable preventive maintenance that prolongs equipment life and reduces filter cleaning frequency, suitable for regular spa upkeep.
Sundance Spas
Sundance® 800 Series Spa Pillow (2009–2012) – Contoured O...
$55.96
Genuine Sundance® factory replacement pillow for 800 Series spas manufactured between 2009 and 2012
Features a gently contoured ergonomic design for neck and head support during long soaks
Made from marine-grade vinyl to withstand heat, moisture, chemicals, and UV exposure
Replaces original factory-installed pillow—ideal for restoring comfort and appearance
Quick and simple snap-on installation—no tools required
Designed to fit specific Sundance® 800 Series spa seats with original mounting posts
Compatible with models such as Maxxus, Altamar, Cameo, and Optima (2009–2012)
Helps extend the life of your spa by replacing worn or discolored cushions with OEM-quality parts
Hot Tub Things
Hot Tub Things® SPAPURITY Mineral Cartridge – Sundance® S...
$24.95
Compatible replacement for Sundance® SunPurity Mineral Cartridge, offering similar performance and fit.
Uses silver ions to continuously kill bacteria and enhance water clarity with less chlorine.
Reduces chlorine use by up to 50%, minimizing odor, skin irritation, and chemical wear on spa components.
Installs directly into the filter area of compatible Sundance® Spas—no tools or special housing required.
Ideal for 680, 780, and 880 Series Sundance® models with dedicated cartridge compartments.
Works with chlorine-based sanitation systems for complete mineral water care.
One cartridge lasts up to 4 months with normal spa usage, simplifying your maintenance routine.
Made in the USA and trusted by spa service professionals as a reliable aftermarket solution.
Bullfrog Spas
FROG™ @ease Cartridge Holder for Bullfrog® Spas – part #1...
$33.50
Upgrade your Bullfrog spa’s water care with this official FROG™ @ease cartridge holder (part #10‑01006), designed to fit all Bullfrog Spas (2013+ models) with dual filter systems. Engineered to hold both the SmartChlor® and mineral cartridges securely, it converts your spa into a self-regulating sanitizing system that reduces chlorine usage by up to 75%. Easy install—just snap into place between filters. Compatible with FROG test strips, this holder streamlines water care, ensuring crystal-clear, softer water with minimal maintenance.
Official FROG™ @ease holder designed for 2013–present Bullfrog spas
Quickly installs between dual filter cartridges—no tools required
Works with both mineral and SmartChlor® cartridges for balanced sanitization
Helps maintain consistent low-level chlorine using SmartChlor self-regulating technology
Durable ABS construction resists spa chemicals and heat for long-term use
Jacuzzi Hot Tubs
Jacuzzi® ProClassic™ 50 Sq Ft Filter Cartridge (2023+ J‑2...
$105.57
Upgrade your spa’s filtration with this genuine Jacuzzi® ProClassic™ cartridge, featuring a patented oval shape and 50 sq ft of Reemay® pleated media – designed exclusively for 2023+ J‑200™ Collection hot tubs. Its durable, rinseable construction promotes reusable performance up to 18 months. Simplify maintenance with an open-top design and robust build for long-lasting clarity and flow.
Patented oval design tailored for 2023+ J‑200™ models
50 sq ft Reemay® pleated media captures fine and coarse debris
Oval top opening (~4″) and 3″ bottom fit provide secure placement
Durable, rinseable construction with up to 18 months of use
OEM part ensures perfect fit and spa warranty compliance