POPULAR CATEGORIES
SHOP BY SPA BRAND
FILTER CARTRIDGES
Hot Tub Things™
Bullfrog Spas®
Jacuzzi® Hot Tubs
Sundance® Spas
Unicel

Hot Tub Things
Hot Tub Things 282 Microban Filter 2‑Pack – Replaces Bull...
$75.95
Premium dual-pack replacement filters compatible with Bullfrog Spas A, R, and X Series (2018 to present) and retrofittable to 2013–2017 models with Filter Cage Core Assembly (#10-00417).
Coreless, antimicrobial Microban® pleated media inhibits odor-causing bacteria and reduces filter maintenance.
Captures fine particles down to 20 microns, preserving water clarity and extending component life.
Built to original spec—fits Wellspring 282, Pleatco PBF40/PBF40M, Filbur FC‑9900.
Eco-conscious coreless cylinder design reduces plastic waste and simplifies cleaning.
Comes with two filters—one for circulation and one for pump side, ensuring comprehensive filtration.

Hot Tub Things
Hot Tub Things Inner Filter – Sundance 880/850 Series (20...
$35.95
Replacement for the OEM Sundance Spas MicroClean® Ultra inner filter (6473‑164S) used in dual-stage filtration systems
Compatible with Sundance 880 Series (2009–2023) and 850 Series (2005–2023) spas, including models like Altamar, Capri, Cameo, Majesta, Marin, Maxxus, Optima, Aspen, Claremont, and Lisbon
Crafted from dense spun-bound polyester microfiber media to capture ultra-fine particles passing through the outer filter
Dimensions: approximately 18.74″ length × 5.63″ diameter with a 2.75″ open-hole top and bottom
100% fit and function with OEM part #6473‑164S, also known as AK‑6473164 or SD‑01293
Non-washable design—replace every 3–6 months depending on usage for optimal water clarity
Tool-free installation: remove old inner filter, insert this replacement, then reinstall compatible outer filter
Helps maintain crystal-clear water by preserving inner pump performance and reducing spa maintenance efforts

Hot Tub Things
Hot Tub Things Disposable MicroClean Filter – Sundance 65...
$18.50
Replacement for Sundance® disposable upper MicroClean® cartridge (OEM 6540‑502S)
Compatible with a wide range of Sundance models from 2002 to 2024, including Tango, Caprio, Metro, Bahia, Dover, Montclair, Chelsee, Victoria, Constance, and more
Designed with spun-bound microfiber media that absorbs oils, lotions, and fine debris—non-washable, replace every 3–4 months
Dimensions: approx. 7.64″ × 7.68″ × 5.08″; weighs ~0.71 lb (TTW spec)
Works in conjunction with outer cartridge #6540‑501S in dual-stage filtration systems
Compatible with all sanitizer types—chlorine, bromine, UV, and mineral
Budget-friendly alternative with OEM-level fit and performance

Hot Tub Things
Hot Tub Things® Flat Filters 4‑Pack – Fits Simplicity® by...
$69.95
High-quality Hot Tub Things® flat filter 4-pack, compatible with Bullfrog® Simplicity® Series spas
Direct replacement for OEM filter part #10‑00814 used in 2018 and newer Simplicity® models
Coreless design improves water flow and efficiency while simplifying filter changes
Engineered from durable pleated media that captures fine particles and debris
Designed for quick installation—no adapters or tools required
Replaces factory-installed filters for reliable water clarity and hassle-free maintenance
Includes 4 flat cartridge filters—a convenient bulk pack for seasonal replacement
Not compatible with Bullfrog STIL, M, A, or X Series spas

Hot Tub Things
Hot Tub Things Outer Filter – Sundance 880/850 Series (20...
$60.95
Premium replacement for the Sundance Spas 6473‑165S MicroClean® Ultra outer filter cartridge
Designed for Sundance 880 and 850 series spas (model years 2005–2023) and compatible newer variants
Crafted from durable spunbonded polyester media that resists fraying and shedding under high-heat spa conditions
Dual-stage filtration system: outer pleated cartridge captures larger debris, extending the lifespan of the inner filter
Fully washable and reusable—clean monthly to maintain peak performance and reduce ongoing costs
Compatible with all spa chemistries: chlorine, bromine, UV, and mineral sanitizers
Slip-in design allows tool-free installation—matches OEM cartridge size and fit
Weighs approximately 3.25 lb and measures about 19.8″ long × 8.42″ diameter

Bullfrog Spas
Bullfrog® Wellspring 282 Coreless Filter 2‑Pack (A, R & X...
$95.99
Genuine OEM Bullfrog® Wellspring 282 filter cartridges, packaged as a 2‑pack for convenient replacements.
Designed to fit Bullfrog® A‑Series, R‑Series, and X‑Series spas manufactured from 2018 to present.
Can be retrofitted to 2013–2017 Bullfrog models using the Filter Cage Adapter #10‑00417.
Coreless design eliminates the need for a plastic center core, reducing waste and increasing water flow efficiency.
High-quality filtration media captures debris and particles down to approximately 20 microns, keeping spa water clean and clear.
OEM filter ensures proper fit and performance, protecting spa pumps, heaters, and other internal components.
Each pack contains two Wellspring 282 filters, ideal for replacing both primary and circulation filters at the same time.

Bullfrog Spas
Bullfrog Spas Simplicity® Flat Filters – 4-Pack for M, Sw...
$78.50
Bullfrog’s Simplicity® Flat Filters (Part #10-00814) are designed to offer unmatched filtration performance and ease of maintenance for the M Series, Swim Series, and 2023–present A Series spas. These innovative flat-style filters eliminate the waste and inefficiency of cylindrical cartridges by using 100% of the filtration surface, delivering better water clarity with less effort.
The plastic-free design is eco-conscious and easily rinsed clean, or simply replaced monthly for zero mess.
Fits Bullfrog M Series, Swim Series, and A Series (2023–present)
Flat, plastic-free design maximizes filtration area for better performance
Improves efficiency and reduces filter waste over time
Easy monthly maintenance – rinse clean or replace in seconds
Genuine OEM filters (Part #10-00814) for a perfect fit and reliable function
Package includes 4 flat filters
Ideal for spa owners who want convenience, clarity, and cost control

Bullfrog Spas
Bullfrog® STIL Series Coreless Filter 2‑Pack (2018–Presen...
$90.99
Genuine Bullfrog® Spas coreless filter cartridge 2-pack for STIL Series spas from 2018 to present
Engineered for Bullfrog's Wellspring™ filtration system—no internal core means improved water flow and reduced maintenance
Filters out fine debris, oils, and particulates to help keep spa water clean and clear
Durable, pleated filtration media provides long-lasting performance and easy rinse-and-reuse functionality
Designed to fit perfectly in STIL Series spas without modification or adapters
OEM-quality filter ensures optimal spa performance and protection for pumps and heaters
Each 2-pack provides a complete filter change for most STIL models
Recommended replacement interval: every 3–6 months depending on spa usage and water quality

Bullfrog Spas
Bullfrog Spas Filter Cartridge with Microban® – Fits A, R...
$71.88
The Bullfrog Spas Filter Cartridge with Microban® (Part #10-2870) is a factory-original replacement designed for optimal performance in A Series, R Series, and X Series spas built from 2013 to 2016. This high-quality filter features Microban® antimicrobial technology, which helps inhibit the growth of bacteria and mold on the filter media—extending the life of your filter and improving your water quality.
If you're considering a coreless upgrade, this filter can be replaced with compatible coreless cartridges using an optional Filter Cage Core (#10-00417).
Fits Bullfrog A Series, R Series, and X Series spas (2013–2016)
Genuine OEM filter (Part #10-2870) ensures perfect fit and filtration performance
Features Microban® antimicrobial technology to resist bacteria and extend filter life
Pleated filtration media traps fine particles and debris efficiently
Improves water clarity, hygiene, and overall system performance
Easy to install and replace as part of routine spa maintenance
Can be replaced with coreless filter #10-00416 or #10-00810 (requires filter cage core #10-00417)
Choose this Bullfrog filter to keep your spa water cleaner, clearer, and safer—session after session.

Jacuzzi Hot Tubs
Jacuzzi® ProClear® 60 Sq Ft Filter Cartridge – Genuine 2‑...
$143.19
Includes two genuine Jacuzzi® ProClear® II 60 sq ft filter cartridges (part #6000‑383AJ), each featuring a twist‑off cap that allows insertion of a ProClear mineral stick without removing the filter
Designed for Jacuzzi® J‑300™, J‑400™, J‑500™, and J‑LX® spa collections from 2002 and newer, supporting spas with ProClear II circulation systems
Each cartridge is built with durable, pleated Reemay® media that provides excellent filtration of oils, debris, and fine particles for clear and healthy spa water
Filter dimensions are approximately 6.693″ diameter × 15.47″ length with a 2.375″ coarse SAE threaded port on the bottom and a built-in top handle for easy removal
Ideal for replacing both filter elements at once to ensure balanced flow and filtration, saving time and improving water clarity
Filters can be rinsed monthly and typically last 12 to 18 months, depending on bather load and maintenance routine

Jacuzzi Hot Tubs
Jacuzzi® PROCLARITY® Depth Load Filter Cartridge – Ultra‑...
$27.05
OEM ProClarity™ depth-load filter cartridge (part #6473‑161J), engineered with ultra-dense microfiber media to capture microscopic debris and polish spa water clarity
Designed for use in Jacuzzi® J‑400 and J‑500 Series tubs (2012+), as well as selectable J‑300 Collection models upgraded to ProClarity™ systems
Absorbs particles up to ten times finer than standard pleated filters—enhancing filtration performance in multi-stage systems
Disposable: do not rinse or reuse; replace every 3–4 months (or roughly 90 days) for optimal performance
Must be installed with solid side up, above the plumbing grate, paired with a pleated pre-filter

Jacuzzi Hot Tubs
Jacuzzi® ProClear® 60 Sq Ft Filter Cartridge – 15.45″ Hyd...
$75.35
Genuine Jacuzzi® ProClear® 60 sq ft hydro filter (part #6000‑383AJ), built for J‑300™, J‑400™, J‑500™, and J‑LX™ Collection spas
High-capacity woven Reemay® media provides deep filtration and extended flow life
Twist-off cap accommodates ProClear™ mineral sanitizer (silver cartridge) or chemical dispensers without removal
Measures approximately 15.45″ tall by 6.697″ diameter, with 2.375″ bottom threaded port for OEM fit
Compatible with all J‑300™ models (2002+); select J‑400 (2013+), J‑500 (2015+), and J‑LX/LXL (2011‑2019 & 2023+) spa models

Jacuzzi Hot Tubs
Jacuzzi® PROCLARITY® 40 Sq Ft Primary Filter Cartridge – ...
$87.89
Genuine Jacuzzi® PROCLARITY® 40 sq ft pleated primary filter cartridge (part #6473‑157J) designed for ProClarity® filter systems
Fully washable Reemay® media provides deep filtration of oils, sediments, and medium‑sized debris for extended flow life
Fits Jacuzzi® J‑495, J‑425, J‑415 (2012+), J‑465, J‑470, J‑480 (2013+), J‑500 (2015+), and select J‑300 Collection spas with ProClarity® upgrades
Dimensions are approximately 6″ diameter × 8.5″ height with a 2.375″ bottom access hole and easy-grip handle
Rinse and reuse multiple times; replace every 3–6 months or when cleaning reset flow performance
Works in tandem with the disposable depth-load filter #6473‑161J (sold separately) for top-tier water clarity

Jacuzzi Hot Tubs
Jacuzzi® ProClassic™ 50 Sq Ft Filter Cartridge (2023+ J‑2...
$105.57
Upgrade your spa’s filtration with this genuine Jacuzzi® ProClassic™ cartridge, featuring a patented oval shape and 50 sq ft of Reemay® pleated media – designed exclusively for 2023+ J‑200™ Collection hot tubs. Its durable, rinseable construction promotes reusable performance up to 18 months. Simplify maintenance with an open-top design and robust build for long-lasting clarity and flow.
Patented oval design tailored for 2023+ J‑200™ models
50 sq ft Reemay® pleated media captures fine and coarse debris
Oval top opening (~4″) and 3″ bottom fit provide secure placement
Durable, rinseable construction with up to 18 months of use
OEM part ensures perfect fit and spa warranty compliance

Sundance Spas
Sundance® MicroClean® Filter Set – Inner + Outer Ultra Ca...
$155.68
Genuine Sundance® MicroClean® Ultra dual-stage filter assembly includes both the disposable fine inner filter (6473‑164S) and the washable pleated outer filter (6473‑165S)
Designed for 880 & 980 Series spas (2009–2025), covering models like Aspen®, Altamar®, Capri®, Claremont™, Kingston™, Lisbon™, Marin®, Majesta®, Maxxus®, and Optima®
Combined filtration surface area of approximately 130 sq ft for superior water clarity and system protection
Outer pleated filter captures large debris and is rinseable to extend its lifespan
Inner microfiber filter traps ultra-fine particles, oils, and lotions for pristine spa water performance
Interlocking cartridge design ensures proper alignment, minimal bypass, and optimized flow
OEM part #6541‑397S represents the latest MicroClean® Ultra cartridge standard for dual‑filtered spa systems

Sundance Spas
Sundance® Disposable MicroClean® Filter – Fine Microfiber...
$27.45
Genuine Sundance® Disposable MicroClean® upper cartridge for dual-stage filtration
Made of dense microfiber media to absorb oils, lotions, and ultra-fine particles that bypass the pleated filter
Designed for use in Sundance® 680, 780, 880, and 980 Series models from 2002 through 2024
Compact “top-hat” design fits securely inside the larger pleated filter (#6540‑501S)
Non-washable—replace every 3–4 months or after draining spa to maintain optimal water quality
Compatible with all sanitizer types including chlorine, bromine, UV, and mineral systems

Sundance Spas
Sundance® 880 MicroClean® Ultra Inner Filter (2012+) – pa...
$73.73
Genuine Sundance® OEM MicroClean® Ultra Inner Filter designed for select 880 Series spas built in 2012 and later
Provides ultra-fine filtration to capture even the smallest particles, oils, and debris for crystal-clear spa water
Works in conjunction with the MicroClean® Ultra Outer Filter to create a dual-stage filtration system for maximum efficiency
Made with high-quality pleated polyester media to ensure long-lasting durability and reliable water flow
Simple installation with no tools required, allowing quick replacement during routine maintenance
Helps protect spa pumps, jets, and heating components by reducing contaminants in the water system
Designed specifically for use with Sundance 880 Series spas; always verify compatibility before purchase

Sundance Spas
Sundance® 75 Sq Ft MicroClean® Filter Cartridge (2005–201...
$80.17
Genuine Sundance® 75 sq ft MicroClean® filter cartridge designed for select 2005–2012 Sundance Spa models.
Provides high-efficiency filtration to keep spa water clean and clear of fine particles and contaminants.
Pleated polyester media construction ensures durability and long-lasting performance.
Fits Sundance® spa models requiring a 75 sq ft MicroClean® filter cartridge (verify with your spa manual).
OEM replacement part guarantees a perfect fit and maintains manufacturer-recommended water quality standards.
Easy to install and replace, simplifying regular spa maintenance routines.
Helps extend the life of spa plumbing and pumps by reducing buildup and debris circulation.

Sundance Spas
Sundance® 880 Series MicroClean® Ultra Outer Filter – (20...
$102.11
Genuine Sundance® MicroClean® Ultra outer filter for 880 Series spas from 2009 to present
Designed to work in tandem with the MicroClean® Ultra inner filter (sold separately) as part of a 2-stage filtration system
High-capacity pleated design captures oils, debris, and fine particulates for crystal-clear spa water
Engineered for optimal water flow and extended filter life with less frequent cleanings
Constructed with durable, chemical-resistant media and reinforced end caps
OEM direct-fit replacement—no adapters or modifications needed
Compatible with 880 Series models including Optima, Cameo, Altamar, Marin, and Maxxus (2009+)
For best results, replace both inner and outer filters every 4–6 months depending on usage

Unicel
Unicel® 4CH-935 – 35 Sq Ft Waterway Replacement Spa Filte...
$46.50
Premium replacement filter cartridge for Waterway spas and other compatible systems requiring a 35 square foot cartridge.
Features high-quality Reemay® polyester media that traps dirt and debris while maintaining excellent flow.
Designed with a closed top and 2" male pipe thread (MPT) bottom fitting for easy installation and secure fit.
4-5/8" outer diameter and 10-1/2" length allow compatibility with compact spa filtration systems.
Offers long-lasting filtration performance and durability under regular spa use.
Helps protect spa pumps and jets from clogging and extends the life of your water care system.
Simple to rinse and reuse between cycles; recommended replacement every 12 months or as needed.
Manufactured by Unicel®, a trusted name in pool and spa filtration.

Unicel
Unicel® Replacement Filter Cartridge – part #C‑4975
$55.95
OEM-quality Unicel® filter cartridge, model C‑4975, designed as a direct replacement for various spa and hot tub applications.
Large pleated polyester media offers a high filtration surface area for efficient debris capture.
Built with a durable core and reinforced end caps—designed for repeated cleanings.
Compatible with multiple systems that previously used U‑29, US‑68, or C‑709 cartridges.
Easy to clean by rinsing with a hose; replace every 12–18 months for optimal performance.

Unicel
Unicel® C-2302 – 25 Sq Ft Rainbow/Waterway Spa Filter Car...
$30.50
High-quality 25 square foot replacement filter cartridge designed for use in Rainbow and Waterway spa filtration systems.
Constructed with durable Reemay® spunbond polyester media for maximum filtration efficiency and water clarity.
Closed top design and 1-1/2" SAE threaded bottom ensure a snug, leak-free fit in compatible filter housings.
Measures 13-5/16" in length and 5" in outer diameter—ideal for compact spa filtration needs.
Improves spa water quality by removing dirt, debris, body oils, and other contaminants.
Helps extend the life of spa heaters, pumps, and plumbing by preventing clogs and buildup.
Easy to clean and reuse; replace every 12 months or sooner depending on spa use.
Manufactured by Unicel®, a trusted brand in spa and pool water filtration.

Unicel
Rainbow® C-2608 Cartridge Filter – 8 Sq. Ft. Replacement ...
$39.95
Genuine Rainbow® C-2608 filter cartridge designed for Dynamic Series I, II, III, and IV systems using the 8 sq. ft. configuration.
Offers 8 square feet of pleated filter media to trap dirt, oils, and fine debris from spa water.
Designed to restore and maintain optimal water clarity and overall filtration efficiency.
Built with durable polyester media, reinforced end caps, and a rigid core for consistent flow and long life.
Commonly used in smaller hot tubs and spas where space-saving filtration is required.
Compatible with multiple brands using Dynamic Series filters, including Pentair, Jacuzzi, and Waterway systems.
Easy to rinse and clean using a garden hose or filter cleaner to extend service life between replacements.
OEM equivalent to Filbur FC-2401, Unicel C-2608, and Pleatco PRB8.

Unicel
Unicel® C-5345 – 45 Sq Ft Rainbow/Waterway Spa Filter Car...
$45.00
45 sq ft spa filter cartridge designed for Rainbow, Waterway, and compatible spa systems requiring open-ended filters.
Made from Reemay® polyester media to provide superior filtration of fine particles, body oils, and other debris.
Open top and bottom with 2-1/8" inner diameter for easy installation and compatibility with standard spa filter housings.
Measures 10-1/8" in length and 5-5/16" in outer diameter—perfect for many compact spa systems.
Helps maintain clean, clear water and reduces strain on pumps, heaters, and plumbing.
Reusable with regular rinsing and monthly deep cleaning using spa filter cleaner.
Should be replaced every 12 months or as needed based on spa usage and water quality.
Manufactured by Unicel®, a trusted industry leader in pool and spa filtration.
PILLOWS & HEADRESTS
Bullfrog Spas®
Hydropool
Jacuzzi® Hot Tubs
Sundance® Spas

Bullfrog Spas
Bullfrog® A‑Series Regular Headrest, Black Foam (2016–201...
$59.13
Restore the comfort of your A‑Series spa's regular JetPaks (2016–2019) with this genuine Bullfrog® OEM headrest (#60‑00071). Made from high-density foam and covered in durable black vinyl, it delivers consistent neck support without sagging or fading. Its two-pin snap-in design ensures easy, precise, and tool-free installation. Built to endure spa chemicals and UV exposure, it offers reliable performance and restores a clean, factory finish to your spa.
Designed exclusively for regular JetPaks on A‑Series spas (2016–2019)
High-density foam cushion wrapped in spa-grade black vinyl
Secure two-pin snap-in fitting prevents shifting during use
Engineered for resistance to spa chemicals, heat, and UV rays
OEM quality fit ensures restored comfort and aesthetics

Bullfrog Spas
Bullfrog® A‑Series Regular Headrest, Graphite Foam (2020–...
$81.29
Update your Bullfrog® A‑Series JetPak modules (2020 onward) with this OEM regular headrest (#60‑01381) in sleek graphite. Featuring firm foam and spa-grade vinyl, it offers dependable neck support and fits seamlessly into 2020–present JetPaks. The two-pin snap-in attachment ensures a secure fit without tools. Built for durability, it resists spa chemicals and UV rays while maintaining spa-grade aesthetics and comfort.
Tailored for regular JetPak modules in A‑Series spas (2020+)
High-density foam core with spa-grade vinyl cover
Two-pin snap-in design ensures stable placement
Materials resist chemicals, heat, and UV exposure
OEM-grade fit restores both function and look

Bullfrog Spas
Bullfrog® X‑Series Headrest, Gray Foam (2015–2022) – part...
$53.73
Renew your Bullfrog® X‑Series spa seating comfort with this OEM headrest (#60‑1390), compatible with Gray JetPak modules from 2015 to 2022. Engineered with weather-resistant high-density foam and gray spa-grade vinyl, it offers plush neck support and durability. The two-pin snap-in mounting delivers a secure, tool-free fit. Ideal for replacing worn originals, this headrest restores both comfort and X‑Series aesthetics.
Suited for X‑Series JetPak seating (2015–2022)
High-density foam core and gray vinyl cover
Snap-in installation with two-pin secure fit
Built to resist spa chemicals, heat, and UV exposure
OEM match ensures proper fit and comfort restoration

Bullfrog Spas
Bullfrog® R‑Series Regular Headrest, Dark Gray Foam (2013...
$55.89
Refresh your R‑Series spa with this OEM regular headrest (#60‑00947), compatible with JetPak modules from 2013 to 2022. It features dense foam wrapped in dark gray vinyl, offering consistent neck support and resistance to spa wear. Crafted with a two-pin snap attachment, it installs securely without tools. Durable for spa environments, it resists chemicals and UV light, restoring both comfort and style to your spa's JetPak seating.
Compatible with most R‑Series JetPaks (2013–2022)
High-density foam core with dark gray spa-grade vinyl material
Two-pin snap-in attachment for tool-free installation
Handles spa chemicals, sunlight, and heat exposure
OEM-grade restoration for spa comfort and appearance

Bullfrog Spas
Bullfrog® A‑Series NeckMasseuse/Blaster Headrest, Black (...
$106.98
Enhance your 2020–2022 Bullfrog® A‑Series with this OEM NeckMasseuse/Blaster headrest (#60‑01447), precisely designed for those JetPak modules. Built with high-density foam and a black vinyl cover, it provides targeted neck and shoulder comfort during therapeutic hydrotherapy sessions. The two-pin snap-in design ensures a secure, tool-free installation. Durable against spa chemicals and UV exposure, it restores your spa’s look and function to factory condition.
OEM headrest designed for A‑Series NeckMasseuse & NeckBlaster JetPaks (2020–2022)
High-density foam wrapped in spa-grade black vinyl for comfort and durability
Two-pin snap-in design ensures secure, hassle-free installation
Engineered to resist spa chemicals, heat, and UV degradation
Restores proper support and aesthetics to your spa’s neck jet modules

Hydropool
Hydropool® Tubular Pillow – Replacement Spa Headrest (201...
$29.25
Genuine Hydropool® replacement pillow designed to fit select models from 2010 to 2015 with tubular-style headrests.
Provides a comfortable and supportive surface for resting your head and neck while using the spa.
Features a curved, contoured design that matches the factory-original specifications for seamless replacement.
Made with water-resistant, chemical-resistant materials that are built to endure regular spa use.
Installs easily into the existing pillow mount—no tools or adhesives required for most installations.
Helps refresh the appearance and comfort of your spa, especially if the original pillows have cracked or faded.
Compatible with a range of Hydropool hot tubs, including Self-Cleaning and Serenity series (check model/year for exact fit).
Finished in dark charcoal/black to blend with most spa interiors and cabinet colors.

Hydropool
Hydropool® Small Wrap Pillow – Ergonomic Head & Neck Supp...
$66.00
Genuine Hydropool® small-sized wrap pillow (part # 8515047) crafted specifically for compact seats in Hydropool spas, enhancing comfort in snug areas.
Wrap-around ergonomic shape offers cushioned support for head and neck while allowing jets to operate unobstructed.
Constructed with durable, spa-grade vinyl that resists fading, cracking, and damage from UV rays, chemicals, and frequent use.
Foam core features quick-drain technology to prevent water retention and reduce mildew and bacterial growth.
Designed for straightforward installation using built-in Velcro straps—attaches securely to most Hydropool spa shell contours.
Easy to clean: simply wipe with a spa-safe cleaner or diluted mild soap and rinse—no removal necessary.
Compatible with Hydropool spas equipped with smaller lounge or seat configurations, enhancing relaxation without interfering with tub design.
Durable construction ensures long-lasting comfort and value for regular spa users.

Hydropool
Hydropool® Charcoal Waterfall Pillow – Waterfall Slit Foa...
$46.25
OEM waterfall-style pillow designed for Hydropool Self‑Cleaning hot tubs and swim spas manufactured between 2010 and 2015
Features a central slit to accommodate the waterfall blade (part #6050005, sold separately)
Constructed of high‑density foam core wrapped in spa‑grade charcoal vinyl for durability and comfort
Tongue‑and‑groove snap-in design securely mounts to pre‑installed wave clips—no tools needed
Compatible replacement for older model pillow #8515019
Easy installation: simply align and press onto the side slots
Ideal for restoring comfort and proper waterfall alignment

Hydropool
Hydropool® Wrap Pillow – Warm Grey Spa Pillow 28″ (Post‑2...
$67.50
Curved wrap-style spa pillow measuring approximately 28" long by 4" wide and 3" thick, engineered specifically for Hydropool Self‑Cleaning and Swim Spa models built after November 2015.
Slides into a tongue‑and‑groove channel molded into the spa shell and secures over a pillow clip (Hydropool part #2005100) for a snug, rattle-free fit.
Constructed from warm grey, spa-grade vinyl that resists fading, cracking, and damage from UV exposure, spa chemicals, and repeated use.
Contains a quick-drain foam core that rapidly sheds water to minimize moisture retention, mildew growth, and bacterial buildup.
Ergonomically shaped to provide cushioned neck and head support in larger lounge seats without obstructing any jet streams.
Easy to clean—simply wipe with a mild, spa-safe cleaner and rinse; no removal required for routine maintenance.
OEM-designed pillow ensures an exact fit, matching barrel curvature and clip locations in post‑2015 Hydropool spa shells.
Helps enhance spa comfort and aesthetics while maintaining high-quality materials and construction for long-term durability.

Hydropool
Hydropool® Waterfall Pillow – Warm Grey (2015+) – part #8...
$46.25
OEM pillow designed for Hydropool® Self Clean hot tubs and swim spas equipped with integrated waterfall jets (2015–2020).
Features a central waterfall slot to allow seamless water flow through the headrest, preserving spa functionality.
Crafted from high-density foam wrapped in warm grey spa-grade vinyl for ergonomic comfort and modern aesthetics.
Snap-in tongue-and-groove installation securely fits pre-installed wave clips—no tools required.
Ideal replacement for worn or discolored pillows, restoring original appearance and comfort.
Precisely contoured to match Hydropool’s waterfall shell design and maintain OEM alignment.

Jacuzzi Hot Tubs
Jacuzzi® J‑400 Collection Spa Pillow, Black/Grey (2017–Pr...
$62.96
OEM replacement pillow for Jacuzzi® J‑400 Collection spas and select models including J-435 & J-445 (from 10/2017+), J-475 & J-485 (2019+), and all J‑400 models from 2020 onwards
Features contoured ergonomic design crafted from high-density, water-resistant foam with durable vinyl cover for plush neck and head support
Slide‑on installation—no tools required—simply slide the pillow into the integrated shell bracket until securely locks
Measures approximately 13.15" × 9.41" × 1.89" (L × W × H); weighs about 0.24 lb for lightweight comfort
OEM-grade fit and finish matches original spa interior design and durability standards
Restores worn or faded headrests and upgrades comfort on newer models with enhanced support
Replaces previous pillow part number 6455‑031; current PN #2472‑007 includes only the pillow (bracket hardware sold separately)
Compatible with optional grommet (#6540‑543) and nut (#6540‑547) for secure attachment

Jacuzzi Hot Tubs
Jacuzzi® J‑300 Oval Spa Pillow Insert – Non‑Lit 2002–2006...
$43.18
This genuine OEM Jacuzzi J‑300 pillow insert (#6455‑007) is designed for tubs built between 2002 and 2006 that do not include pillow lighting, ensuring a perfect fit into the corresponding mounting bracket.
Measuring approximately 9″ × 4½″ × 1¼″, its oval shape and high-density foam core provide excellent neck and head support during extended soaks while maintaining its shape over time.
The water-resistant rubber-emulsion coating resists water absorption, mildew, and UV exposure, making it durable for long-term use in spa environments.
With a simple snap-in installation, this pillow easily attaches to the mounting bracket (part #2455‑105), replacing worn or damaged inserts in minutes without tools.
Finished in stylish silver-grey vinyl coating with the embossed Jacuzzi logo, it restores both function and aesthetics to your spa’s interior.

Jacuzzi Hot Tubs
Jacuzzi® J‑300™ Pillow Kit – part #2472‑824 (Oval Insert ...
$62.96
OEM pillow kit for Jacuzzi® J‑300™ Series spas (2014–2020), includes oval-shaped insert and backing mount.
Designed to offer enhanced neck and head support and restore factory comfort.
Spa-grade gray vinyl insert features translucent window for LED-lit headrests.
Push-in mounting style for easy, tool-free installation.
Backward-compatible with J‑300 models 2002–2020; replaces earlier part 2472‑826.

Jacuzzi Hot Tubs
Jacuzzi® J‑400 Spa Pillow, Gray (2009–2019) – Slide‑On Pi...
$71.33
OEM replacement spa pillow for Jacuzzi® J‑400 series spas (mid-2009 through 2019)
Slide-on mounting design with integrated translucent window featuring the Jacuzzi® logo, allowing backlighting to shine through
Constructed of durable water-resistant, high-density foam with spa-grade vinyl cover for comfort and longevity
Dimensions: approx. 13.6" × 7.05" × 2.85", perfectly molded to support the neck and shoulders during soak sessions
Designed for easy installation—slides into slot and locks securely; compatible with spa’s lighting features
Matches original OEM aesthetics and enhances relaxation with plush, ergonomic support
Replaces previous part #2455‑263; compatible with most J‑400 tubs made between 2009 and 2019, excluding certain 2017+ J‑435/J‑445 and 2020+ models
Weighs approx. 0.29 lb and resists daily spa use

Jacuzzi Hot Tubs
Jacuzzi® J‑200 Spa Pillow (Silver Grey) – Oval Snap‑In He...
$47.54
OEM oval spa pillow headrest (part #2472‑828) designed for Jacuzzi® J‑200 Series hot tubs from 2008‑present
Silver-grey finish matches factory styling; single snap-in post at center rear for secure mounting
Measures approximately 10″ × 5¼″, crafted from soft, spa-grade foam wrapped in durable, waterproof vinyl for support and comfort
Offers ergonomic head and neck support, resists moisture, spa chemicals, and UV exposure
Easy push‑in installation—no tools required—and compatible with replacement part #6455‑468 dark gray version
Commonly needed in sets of 3 or 4 depending on spa model

Sundance Spas
Sundance® 800 Series Spa Pillow (2009–2012) – Contoured O...
$55.96
Genuine Sundance® factory replacement pillow for 800 Series spas manufactured between 2009 and 2012
Features a gently contoured ergonomic design for neck and head support during long soaks
Made from marine-grade vinyl to withstand heat, moisture, chemicals, and UV exposure
Replaces original factory-installed pillow—ideal for restoring comfort and appearance
Quick and simple snap-on installation—no tools required
Designed to fit specific Sundance® 800 Series spa seats with original mounting posts
Compatible with models such as Maxxus, Altamar, Cameo, and Optima (2009–2012)
Helps extend the life of your spa by replacing worn or discolored cushions with OEM-quality parts

Sundance Spas
Sundance® 880 Series Spa Pillow – OEM Gray (2019 +) – Par...
$45.50
OEM high-density foam pillow wrapped in durable gray vinyl, designed specifically for Sundance® 880 Series spas (2019 +) except Marin & Cambria models.
Precise snap-in installation—attaches easily via standard spa shell socket; no brackets or tools required.
Contoured shape provides ergonomic neck and head support to enhance relaxation.
Constructed using spa-safe materials that resist chlorine, bromine, UV exposure, and moisture.
Replaces original part #6455‑025 to restore OEM comfort and style.
Perfect for reviving factory headrests on Altamar, Aspen, Capri, Cameo, Maxxus, and Optima models built from January 23, 2019 onwards.
Authentic replacement ensures exact fit and match to original spa aesthetic.

Sundance Spas
Sundance® 780 Series Spa Pillow (2017–2025) – Replaces pa...
$49.64
OEM headrest pillow designed specifically for Sundance® 780 Series spas (April 2017–2025), replacing part #6455-502.
Constructed with high-density foam and wrapped in spa-grade gray vinyl that resists chemicals and UV exposure.
Ergonomic design (~11.3″ wide × 6.3″ tall × 2.7″ deep) provides comfortable neck and head support.
Snap-in installation via a single center-pin—no tools required.
Restores original spa aesthetics and comfort across multiple models.
Durable, easy-to-clean materials ensure longevity and maintain spa appearance.

Sundance Spas
Sundance® 780 Series Spa Pillow (2007–2017) – Replaces 64...
$51.68
OEM headrest pillow crafted for Sundance® 780 Series spas produced between 2007 and 2017 (supersedes part #6455‑469).
Ergonomic foam cushion wrapped in spa-grade gray vinyl with precise ball-and-socket snap-in design—no tools required.
Dimensions approx. 11″ wide × 5½″ tall × 2″ depth—designed to cradle neck and shoulders comfortably.
Compatible with models including Camden, Certa, Chelsee, Dover, Hamilton, and Montclair.
Durable construction resists chlorine, bromine, UV, and water exposure for long-lasting use.
Easy to clean and maintain—simply remove and rinse periodically to preserve appearance.

Sundance Spas
Sundance® Chevron Spa Pillow (2001–2009) – Replaces 6455‑...
$69.98
OEM two-piece Chevron pillow designed for Sundance® 850/880 Series spas manufactured between 2001 and 2009.
Includes outer pillow shell and soft inner foam insert for enhanced comfort and ergonomic neck support.
Constructed from high-density, water-resistant foam and spa-grade gray vinyl to withstand moisture, chemicals, and UV exposure.
Designed for models such as Altamar, Capri, Cameo, Marin, Maxxus, Metro, Optima, Solo, and Tango.
Secures to the spa shell with two plastic screws (part #6570‑231), which are sold separately.
Features contoured styling to match the spa’s original design and maintain a clean OEM look.
Easily replaceable—simply unscrew the old unit and install the new one with the same mounting holes.
A direct replacement for Sundance part #6455‑467 and compatible with insert #6455‑482.
WHY CUSTOMERS LOVE US!