Hydrosoothe Pillow Assembly Pillow comes with the back fitting Part #2472-136   The Jacuzzi® J300™ Hydrosoothe Pillow was introduced on hot tub models manufactured in 2020. The pillow comes complete with the back fitting as shown in the photo. It cannot be retrofitted to previous models or other seats.

Bullfrog replacement headrest Color – Cool Grey. Bullfrog Part # 60-01335-01 Replace your dingy, bubbled, or damaged Bullfrog headrest. Rejuvenate the look and feel of your hot tub. This genuine Bullfrog headrest replaces the one that came installed over the JetPak of your M Series Bullfrog Spa. This headrest is model 60-01335-01. It fits all JetPak models sold with M-Series hot tubs. The -01 in the model number indicates this is the gray colored headrest. We do not stock the beige color. Note: Bullfrog headrests can look very similar. This is headrest 60-01335. It only fits M Series tubs from 2020–onward. Please compare the part numbers in your owner's manual to these part numbers. We want you to get the right parts! Hot tub pillows are consumable parts. Exposed to sunshine, hot and cold temperature changes, and oils from hair and skin, hot tub pillows will eventually crack or fade. We recommend cleaning your pillows with our special Pillow & Cover Cleaner. Protect and preserve your pillows and other patio equipment by treating them with 303 Aerospace Protectant. All Bullfrog M-series spas are compatible with the Frog @ease Sanitizing System for Bullfrog spas. Try an @ease System and see how easy it can be to have sparkling clean mineral water in your hot tub!

Hydropool Part # 8515024 Colour: Charcoal Size: 12 inches The waterfall blade is required and not included. This pillow is similar to the tubular pillow(8515023) however this one has an opening in the centre for the Hydropool Waterfall Feature. It is held into place with a tongue & groove design on the side of the pillow.

Compatibility Alicia Mid 03/2023+ | 3 Pillows Edison Mid 03/2023+ | 4 Pillow McKinley Mid 03/2023+ | 4 Pillows Peyton Mid 03/2023+ | 3 Pillows Prado Mid 03/2023+ | 4 Pillows Ramona Mid 03/2023+ | 3 Pillows

The J300 Jacuzzi Pillow 6455-488 fits all 2002–2018 J-300 Collection models. However, the inset "scoop" curve of this pillow conforms to the designs of Jacuzzi J-300 series hot tubs made in 2014 and later. J-300 series hot tubs made before 2014 can use these pillows, but might prefer the older, convex pillows for a consistent look. These pillows do not include the dark gray outside pillows, sometimes referred to as pillow mounts, which is part# 2455-105 and are sold separately. Jacuzzi Pillows add a new degree of comfort to a spas relaxing atmosphere. After setting up your hot tub, just lean back onto the concave headrest to take in the rejuvenating experience.

  Replacement Sundance Pillow Replaces original SKU: 6455-452 Does not include the Bracket Mount (6455-500)

With plastic screw fastener. Original Sundance Spa Part

Official Replacement Jacuzzi Pillow, part # 2455-104 Does not include back mount pillow (2455-105) Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system Pillow insert for LED mood lighting systems. Displays clear Jacuzzi® logo. 

This pillow replaces old pillow part #6455-487 Key Features: Durable and water-resistant for long-lasting use Ergonomic design for enhanced comfort Easy to install and maintain Fits specific Jacuzzi models Transform your Jacuzzi time into a truly rejuvenating experience with this high-quality replacement pillow!

[embed]https://www.youtube.com/watch?v=JXNgtxPvWEY[/embed] Gently pull the pillow, from the front, to remove. Insert the new pillow. Tighten the wing nuts. Replace the foam chunks and close paper.

2023+ Neck: 60-01925-01 (gray) 60-01925-02 (beige) 2023+ Regular: 60-01924-01 (gray) 60-01924-02 (beige)

Sundance® Spas / Sweetwater® Pillow Mounting Bracket Compatible with the following pillow part numbers: 6472-972 (old part number 6455-452) 6472-968 (old part number 6472-455)

OEM ball and socket Sundance Sweetwater pillow Sundance Sweetwater Spas replacement pillow Replaces 6455-451

For use with Jacuzzi J-200 Series Hot Tub Comes in the color gray The snap-in design allows you to effortlessly attach and remove the pillow Crafted with soft and comfortable materials Similar to 2472-828 pillow

Genuine Jacuzzi brand part Clear window for headrest lighting Contains both the dark grey 2455-105 and the light grey 2455-104 insert Restore your backyard oasis with these genuine Jacuzzi 2472-826 pillows. Pillows are one of the ways in which your spa can show its age. Replacing dingy, cracked, or waterlogged pillows can help your spa look new again! The Jacuzzi 2472-826 pillow contains a translucent window for the proud Jacuzzi name to shine through on tubs equipped with headrest lighting. Contains the complete pillow: both the light grey insert and the dark grey “ring” or holder. No mounting hardware is included. Your J-300 series hot tub should have permanent mounting hardware that should last for years and years. If you require new mounting hardware, please see your local Jacuzzi dealer or schedule a service visit. The Jacuzzi 2472-826 pillow is for older (2007–2013) J-300 series spas. This product looks very similar to the newer J-300 pillows. The only difference is that the light grey inserts of these older pillows have a rounded "oval" surface. They do not “scoop in." In a pinch, you can use the newer pillows, as they will fit your J-300 hot tub. However, for a true match, we recommend you stick with these. Pillows are consumable units that should be replaced every two or three years. We recommend cleaning your Jacuzzi 2472-824 pillows with our Hot Tub Things Pillow & Cover Cleaner. It is specially formulated to remove grease and hair products from your pillows without causing foamy water.

This is for units without the LED light behind the headrest. Does not include pillow slider part # 2570-401. This is for units without the LED light behind the headrest. Does not include pillow slider part # 2570-401. Formerly part #20152-001

Compatibility: Altamar 2015 and later Aspen 2015 and later Cameo 2015 and later Cambria 2015–18 but NOT 2019 Capri 2015 and later Marin 2015–18 but NOT 2019 Maxxus 2015 and later Optima 2015 and later

Compatibility  2023 A Series™ Standard  2023+ A Series™ Plus  2023+ A Series™ Select

Replaced part #6455-008

Bullfrog replacement headrest for R-Series JetPak Bullfrog Part # 60-1250 (now discontinued - will not be restocked) Fits Bullfrog R-Series tubs 2013–2015 with Neck jets Durable, inflatable rubber pillows Replace with new part # 60-00948