Premium hydraulic-assisted spa cover lifter designed for effortless one-handed operation. Equipped with dual gas shocks that provide smooth lifting and lowering motion. Ideal for recessed spa decks or tight installation spaces thanks to its low-profile design. Requires just 6 inches of rear clearance and 5 inches of side clearance, making it a great choice for smaller patios. Choose from cabinet-mount or under-mount versions depending on your spa setup (under-mount base sold separately). Built from powder-coated aluminum tubing and stainless-steel hardware for long-lasting outdoor durability. Ergonomic, locking handle keeps the cover secure when in the open position. Helps prolong the life of your spa cover by reducing stress, sagging, and moisture retention.

Best-selling manual spa cover lifter offering simple, one-person operation and long-term durability. Constructed from powder-coated aluminum with stainless-steel hardware for rust resistance and outdoor longevity. Requires only 10" of rear clearance and 5" on the sides, making it suitable for a wide variety of installations. Ergonomic padded handle makes lifting and lowering your spa cover smooth and comfortable. Mounts directly to the spa cabinet with included brackets and hardware—no extra base needed. Fold-and-store design keeps the cover off the ground while the spa is in use, protecting it from dirt and wear. Works with square and rectangular spas up to 96" in width; not compatible with round or odd-shaped tubs. Easy to install with basic tools—ideal for homeowners and spa professionals alike.

Universal spa cover lifter designed to accommodate round, oval, or uniquely shaped spas without flat cabinet edges. Features an adjustable under-spa base plate that slips underneath the tub, eliminating the need for mounting screws. Curved frame and pivot arm allow for smooth cover lifting and convenient storage behind the spa. Requires approximately 20–22 inches of rear clearance and works with most cover styles. Made from corrosion-resistant powder-coated aluminum and stainless-steel hardware for durability in outdoor environments. Ideal for soft tubs, rotomolded spas, or freestanding spas placed on patios or decks. Helps extend the life of your spa cover by reducing wear, bending, and waterlogging. Installs easily with minimal tools and no cabinet damage, making it renter- and portability-friendly.

The CoverMate® Zero is a premium low-clearance cover lifter designed for spas installed in tight spaces Ideal for installations where rear clearance is limited to just 6 inches Features a manual-assist lifting mechanism that makes removing and replacing your spa cover smooth and easy Mounts directly to the spa cabinet or deck, offering flexible installation options for in-ground or recessed spas Sleek, powder-coated aluminum tubing resists rust and corrosion for long-lasting durability Ergonomic handle allows for easy one-person operation, reducing strain when opening or closing the cover Compatible with most square and rectangular hot tubs with a cover width up to 96" Includes all mounting hardware and detailed installation instructions

The CoverMate III MAXXUS is an upgraded hydraulic cover lifter designed to support oversized and extra-wide hot tub covers Features extended mounting brackets and reinforced aluminum arms to accommodate large spas like the Sundance® MAXXUS Dual gas shocks provide smooth, effortless lifting and closing of the spa cover with minimal strain Allows for full rear-mounted installation, keeping the lifter discreet and spa views unobstructed Built from weather-resistant powder-coated aluminum for long-term durability in outdoor conditions Requires only 6" of rear clearance and 5" on each side, making it perfect for tight spa installations Locking safety arms hold the cover securely in place when open for safe and stable access Ideal for larger spa models where standard lifters may not reach or provide adequate support

Innovative rear-folding design moves the cover fully behind the spa, giving users an unobstructed 360° view while soaking. Equipped with dual gas-assist pistons that reduce lifting strain and provide controlled, smooth cover motion. Mounts directly to the spa cabinet with low-profile brackets—no bar over the top of the spa when cover is stored. Ideal for flush-deck installations, high-end backyard settings, or spas with view-centric locations. Requires a minimum of 24" clearance behind the spa for proper operation. Designed for use with square or rectangular hot tubs up to 96" wide and standard bi-fold covers. Durable aluminum frame with powder-coated finish and stainless hardware built for year-round outdoor use. Professional-grade appearance and performance, often selected for luxury installs or high-use spa environments. See below for the installation video:

The CoverMate® Vanish XL is a premium hydraulic-assist cover lifter designed for modern, larger hot tubs Features a low-profile design that tucks the cover behind the spa when open—offering unobstructed views Dual gas shocks provide smooth, effortless lifting and closing with minimal strain Ideal for spas up to 96" wide and especially suited for larger acrylic models with wider cabinet lips Requires 25″ rear clearance and 5″ side clearance for full operation Sleek, powder-coated aluminum construction offers exceptional strength and corrosion resistance Includes non-slip grip handle for ease of use and added control Mounts directly to the spa cabinet with all hardware and instructions included for simple installation

Premium hydraulic spa cover lifter, specifically engineered for raised‑back spas like Jacuzzi® J‑475™, J‑485™, and J‑495™ (2020+), using the Vanish XLRP model number CMVAXLRP Features a low‑profile design that tucks the cover neatly behind the spa for a near-zero obstructed view and an unobstructed 360° surrounding view when open Built from durable glass-reinforced nylon and powder-coated aluminum components, offering long-term corrosion resistance and structural rigidity Includes extended pivot arms, hydraulic shocks, and a corner filler piece (9¾″ × 7¾″) to fit the high raised-back spa shell Complements spas up to ~9 ft in dimension; requires approximately 33.5″ clearance behind and 5″ on each side of the spa Installation is simple using 3M liquid weld or screw‑mount methods with precise placement templates included

  Manual spa cover storage solution that mounts to the side of the spa cabinet for quick and easy use. Features two powder-coated aluminum support arms designed to hold a folded spa cover securely off the ground. No lifting mechanisms or hydraulics—just fold your cover and slide it into place for hassle-free storage. Folds flat against the spa cabinet when not in use, saving space and maintaining a clean look. Ideal for tight installations, decks, or areas where space or clearance is limited. Durable weather-resistant materials are built to withstand outdoor exposure year-round. Easy to install with basic tools and includes mounting hardware and instructions. Designed for use with standard foldable spa covers (not compatible with round or soft covers).

Designed specifically for larger spas (approximately 8′ to 10′ wide) or spas with hinge spans beyond standard lifter range. Includes extended pivot arms that maintain a compact 6″ rear clearance and 5″ side clearance, ideal for tight installations. Built from black powder-coated aluminum with non-corrosive composite brackets for long-lasting outdoor durability. Equipped with hydraulic shocks for smooth, effortless cover lifting and lowering. Comes with the TowelMate accessory to conveniently hang towels or robes right on the lifter. Features WindLock safety system to prevent damage from unexpected gusts or wind-lift. Ideal for spas where standard CoverMate III does not reach or align properly due to larger cover size or spa shape.

The CoverMate III DeckMount (CMIII‑DM) by Leisure Concepts is a premium hydraulic cover lifter designed for fully recessed or sunken spas surrounded by decking Specifically engineered to mount directly to the spa deck instead of the cabinet, making it ideal for flush-inset installations where traditional lifters won’t fit Requires only 6 inches of rear clearance and 5 inches on each side, making it suitable for tight spaces and narrow deck environments Integrated dual hydraulic gas shocks make lifting and lowering the spa cover effortless and safe for one person Constructed with powder-coated aluminum and non-corrosive composite mounting brackets for long-term durability in outdoor conditions Includes the TowelMate accessory for hanging towels or robes, and features WindLock technology to prevent cover slam in windy conditions Fits square and rectangular spas up to 96″ wide with a maximum corner radius of 12″

Undermount installation—no decking or cabinet screws required Fits all cover shapes, up to 120″ wide Gas-spring assisted lifting for effortless, single-person operation Stores the cover low and out of sight for a clean aesthetic Includes XL spacers for tapered covers (4″–6″) and compatibility kit for 30–40″ spas—swim spa conversion available to 55″ Durable powder-coated aluminum frame with 5‑year warranty

The CoverMate® Vanish XLR is a specially engineered hydraulic spa cover lifter designed exclusively for Jacuzzi® J‑445, J‑435, and J‑425 hot tubs Offers a clean, low-profile look with full cover support and unobstructed views when open Equipped with dual gas shocks for effortless one-person operation—no heavy lifting required Features custom mounting brackets and arm angles tailored to fit the contours of J‑400™ Series models Installs directly into the spa cabinet with no need for drilling into the shell Built with powder-coated, corrosion-resistant aluminum to withstand tough outdoor conditions Allows your spa cover to lift up and rest low behind the spa—perfect for deck or privacy-sensitive installations Jacuzzi® OEM-approved and manufactured by Leisure Concepts for guaranteed compatibility and performance