Shop
-
60-00777 | Headrest for Neck Jet (X SERIES™) 2018-2021
- Headrest for use with neck jets
- Fits X Series spas with neck jets
- Compatibility: 2018-present.
$41.95 -
6541-853J | ProClassic™ J-200™ Filter (2023+)
- Performance and fit qualified to Jacuzzi factory standards
- Genuine replacement filter for Jacuzzi 2023+ J-200 Models; J-285, J-275, J-245, J-235, J-225 and J-215
- Rinseable filter can be used for up to 18 months (sold separately)
- Use with 2-in-1 Frog @Ease SmartChlor & Mineral Cartridge Holder & exclusive Jacuzzi cartridges (purchased separately)
- Use of non Jacuzzi branded parts can adversely affect the quality of your spa experience. Damage to the hot tub due to unauthorized parts and accessories may void the warranty
$69.95 -
SpaGuard Brominating Concentrate (2 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$27.99 -
2560-040 | Sundance® & Jacuzzi® flow switch 3/4″ and 3/8″ barbed ports
- Sundance, Sweetwater, Jacuzzi Spas Flow Switch
- part #2560-040
- Transparent Tee 3/4 inch barb with s 3/8 inch barb off the side
- Flow Switch now comes molded with a 3/32 inch hole opening
- Do not use on other models such as 800,850, 800 Series that use a square finger connection.
- see spa model compatibility below
$45.99 -
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
SpaGuard Brominating Concentrate (6 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$77.99 -
SpaGuard® Rapid-Dissolve Shock Oxidizing Tabs (1.25 lb)
- Non-chlorine shock-oxidizer
- Quickly oxidizes non-living waste and contaminants**
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spas for 12+ weeks
$23.99 -
SpaGuard® Rapid-Dissolve Stain & Scale Tabs (1.25 lb)
- Controls metal-based staining & scaling
- Protects spa and swim spa equipment and surfaces
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spa for 12+ weeks
$28.99 -
SilkBalance Gems Water Care (4 month supply)
- Same great formula in a dissoluble gem form
- Gems dissolve in 20 seconds (when placed in a filter compartment or water stream
- Treatment: 1 Gem a Week (results may vary)
- Results: Silky Soft Skin, pH and Alkalinity balanced, no odors
$179.99 -
2540-380 | 25 Sq. Ft. Filter Cartridge
- Genuine Jacuzzi Part, guaranteed quality and compatibility
- Compatible with JWB and Echo spas, 2001 and older hot tubs
- 25 square feet of filtration material for clean, clear water
$40.99$59.50 -
6473-158J | Jacuzzi Proclarity Depth Load Filter
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-161 for 2012 models of J-480, J-470, and J-465
$57.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
Pool Closing Complete™ (2 L)
- Protects your pool in the off season during cooler winter temperatures
- Anti-Corrosion & anti-scaling properties
- Works with chlorine, bromine & saltwater
$44.99 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
FROG @ease XL for Bullfrog Spas®, Simplicity Filter System
- Compatible with Bullfrog Spas 2024+
- Ideal for M Series™ & A Series™ in 8 & 9 sizes
- Includes: (1) Mineral (blue cartridge), (1) SmartChlor (silver cartridge), (1) FROG @ease Test Strips, (1) FROG Jump Start packet
- Kills bacteria 2 ways with minerals & Chlorine
- up to 75% less chlorine*
- shock only once a month
- No touching or measuring chlorine
$74.95 -
SpaGuard® Rapid-Dissolve pH Decreaser Tabs (1.25 lb)
- Quickly decrease pH level of spa water
- Provide soaker comfort and protect spa and swim spa equipment
- 2 tabs per 250 gallons – 1000 liters as needed
- Lowers pH 0.1 – 0.2 units
$12.99 -
SilkBalance Shock Gems
- Non-chlorine MPS shock (single-dose)
- Eliminates odors and reduces organic contaminants
- Organic contaminant examples: boil oil, suntan lotion, etc.
- SilkBalance destroys contaminants thru oxidization
- 1 Shock Gem after spa use (2 people) or 2 Shock Gems after spa use (3+ people)
$59.99 -
Pool Complete® 911 (2 l)
- Contains powerful Enzymes and Water Clarifiers
- Significant results in 24 hours – also for occasional use
- Instant Water Rescue for cloudy/hazy or murky/swampy water
- Clarifiers collect and move contaminants to filtration for elimination
$32.99 -
2472-014 | J300™ HYDROSOOTHE™ Massage Pillow (Front-Removable)
- Pillow: Massage, Front-removable, J-300 2020+
- OEM p/n 2472-014
- Pillow assembly consists of foam pillow (6455-036), inner ring (6541-427) inserted into pillow, and outer ring (6541-428) attached to back of inner ring.
- CAUTION: The original HYDROSOOTHE™ pillows were NOT able to be removed from the front of the spa. You will need to access the nuts at the back of the spa shell BEFORE pulling the pillow from the front of the shell.
- Installation Instructions
$72.95 -
FROG @ease XL for Bullfrog Spas®, Simplicity SmartChlor Cartridge 3-pack
- Use only with Frog @ease mineral cartridge in FROG @ease sanitizing system
- includes: (3) Smartchlor (silver) cartridges
- Up to 75% less chlorine*
- Lasts 3-4 weeks for an average 400 Gallon Tub
- Smart, easy, and recyclable
$84.95 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
SpaGuard® Rapid-Dissolve Chlorinating Tabs (1.25 lb)
- Quick-dissolving sanitizer and oxidizer
- Single-dose, 1” tab per 300/600 gallons – 1200-2700 liters weekly
- Administers 3-5ppm of free chlorine
$34.99 -
SpaGuard® Rapid-Dissolve Alkalinity Increaser Tabs (1.25 lb)
- Control pH bounce by quickly raising total alkalinity
- Helps protect equipment from corrosion
- 2 tabs per 250 gallons – 1000 liters as needed
- Raises total alkalinity by 30 ppm
$15.99 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
60-01797 | Standard Pillow (SWIM SERIES™) 2022+
- Function design for the new SWIM SERIES™
- Used on S150 & S200 2022+
- Premium Headrest Design
$35.18 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
60-03603 | Neck Headrest (A Series™ Standard) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$77.85 -
60-02839 | Main Headrest (A Series™ Standard) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$46.27 -
60-03033 | Neck Headrest (A Series™ Plus & Select)
- Neck Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
Trim package compatibility
-
2023 A Series™ Standard- 2023 A Series™ Plus
- 2023 A Series™ Select
$74.89 -
60-02218 | Main Headrest (A Series™ Plus & Select) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$75.87 -
Pool Complete® Weekly (3 L)
- 3-in-1 high intensity formula to be used weekly
- Water enhanced to Ultra high definition clarity
- Stops and prevents future scum growth
- Fast acting phosphate remover
$64.99 -
2540-384J | Jacuzzi® ProClear II Filter Cartridge
- GENUINE JACUZZI | Filter is made by the same company that made your hot tub, so you know it will work perfectly
- 25 SqFt AREA | The tight pleating exposes maximum surface area so the filter can hold more debris
- FOR J-400 HOT TUBS | This is a Jet Pump filter for J-460 and J-465 hot tubs only
$42.50 -
60-01335-01 | Bullfrog Headrest, M Series (2020-present)
- Bullfrog replacement headrest for M-Series JetPak
- Color – Cool Grey.
- Bullfrog Part # 60-01335-01
- Fits Bullfrog M-Series tubs 2020–onward
$38.50