Shop
Want to keep your stuff looking newer, longer? When UV protection and surface finish matter to you, 303 Products has the solution.
-
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
Pool Closing Complete™ (2 L)
- Protects your pool in the off season during cooler winter temperatures
- Anti-Corrosion & anti-scaling properties
- Works with chlorine, bromine & saltwater
$44.99 -
100029 | CMIII Left Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the right side support arm
- OEM part #100029
$60.00 -
100028 | CMIII Right Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the left side support arm
- OEM part #100028
$60.00 -
CoverMate Freestyle
- The cover lift solution for round and uniquely shaped spas
- Adjustable mounting base that slides beneath the spa
- Requires approximately 20 inches of clearance behind the spa
- Positions cover away from the spa allowing full use
- Lifter system sales are final sale
$299.00 -
CoverMate II
- Allow the open cover to rest in a lower position for a slightly less-obstructed view.
- Mounting system: screw-mounted low on the spa
- Made in the USA
- Not compatible with round spas
- Lifter system sales are final sale
$199.00$299.00 -
CoverMate I
- Step up your cover lift with the CoverMate I – Sundance Spas.
- Highest quality and most sold cover lift on the market.
- Sundance version with aluminum mounting brackets
- Lifter system sales are final sale
$299.00 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
SpaGuard® Rapid-Dissolve pH Decreaser Tabs (1.25 lb)
- Quickly decrease pH level of spa water
- Provide soaker comfort and protect spa and swim spa equipment
- 2 tabs per 250 gallons – 1000 liters as needed
- Lowers pH 0.1 – 0.2 units
$12.99 -
Pool Complete® 911 (2 l)
- Contains powerful Enzymes and Water Clarifiers
- Significant results in 24 hours – also for occasional use
- Instant Water Rescue for cloudy/hazy or murky/swampy water
- Clarifiers collect and move contaminants to filtration for elimination
$32.99 -
100561 | Covermate I Sundance Left Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the left side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100561
$75.00 -
SmartStep (Coastal Grey)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Portabello)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
CoverMate III
- Ergonomically designed for ease of use
- Locking shock prevents unintentional closure
- Made in the USA
- Not compatible with round spa
- Lifter system sales are final sale
$399.00 -
23434A | Leisure Time® Spa Mineral Purifier
- Creates softer, cleaner spa water
- Can be used with chlorine or bromine & with non-chlorine shock
- Lasts up to 4 months
- Use in spas / hot tubs up to 600 gallons
- Leisure Time 23434
$42.95 -
2472-014 | J300™ HYDROSOOTHE™ Massage Pillow (Front-Removable)
- Pillow: Massage, Front-removable, J-300 2020+
- OEM p/n 2472-014
- Pillow assembly consists of foam pillow (6455-036), inner ring (6541-427) inserted into pillow, and outer ring (6541-428) attached to back of inner ring.
- CAUTION: The original HYDROSOOTHE™ pillows were NOT able to be removed from the front of the spa. You will need to access the nuts at the back of the spa shell BEFORE pulling the pillow from the front of the shell.
- Installation Instructions
$72.95 -
SmartStep (Black)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
303® Aerospace Protectant (1 gal)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$64.95 -
SpaGuard® Rapid-Dissolve Chlorinating Tabs (1.25 lb)
- Quick-dissolving sanitizer and oxidizer
- Single-dose, 1” tab per 300/600 gallons – 1200-2700 liters weekly
- Administers 3-5ppm of free chlorine
$34.99 -
SpaGuard® Rapid-Dissolve Alkalinity Increaser Tabs (1.25 lb)
- Control pH bounce by quickly raising total alkalinity
- Helps protect equipment from corrosion
- 2 tabs per 250 gallons – 1000 liters as needed
- Raises total alkalinity by 30 ppm
$15.99 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
Safe-T Rail
-
Ultra-sturdy, rust-free construction
- 5-minute installation – two composite mounting brackets with 8 screws each
-
Foam grip for comfort and safety
-
Mounts on most above-ground spas
- Made of rust-free black powder-coated aluminum
- 48″ H with a 2-inch diameter pole
$179.00 -
-
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
Pool Complete® Weekly (3 L)
- 3-in-1 high intensity formula to be used weekly
- Water enhanced to Ultra high definition clarity
- Stops and prevents future scum growth
- Fast acting phosphate remover
$64.99 -
100561 | Covermate I Sundance Right Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the right side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100562
$75.00 -
CoverShelf
- Shelf arms fold flat against spa when not in use
- Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting bracket
- Works well on most unconventional shaped spas
- Lifter system sales are final sale
$199.00 -
2540-384J | Jacuzzi® ProClear II Filter Cartridge
- GENUINE JACUZZI | Filter is made by the same company that made your hot tub, so you know it will work perfectly
- 25 SqFt AREA | The tight pleating exposes maximum surface area so the filter can hold more debris
- FOR J-400 HOT TUBS | This is a Jet Pump filter for J-460 and J-465 hot tubs only
$42.50