Shop
Want to keep your stuff looking newer, longer? When UV protection and surface finish matter to you, 303 Products has the solution.
-
2560-040 | Sundance® & Jacuzzi® flow switch 3/4″ and 3/8″ barbed ports
- Sundance, Sweetwater, Jacuzzi Spas Flow Switch
- part #2560-040
- Transparent Tee 3/4 inch barb with s 3/8 inch barb off the side
- Flow Switch now comes molded with a 3/32 inch hole opening
- Do not use on other models such as 800,850, 800 Series that use a square finger connection.
- see spa model compatibility below
$45.99 -
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
303® Aerospace Protectant (32 oz)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$27.95 -
Leisure Time® Spa 56 Chlorinating Granules (5 lb)
- BENEFITS: Destroys organic contaminants to maintain clean, clear, sanitized water
- USE: Specifically formulated for spa and hot tubs
- COMPATIBILITY: Chlorine sanitizing systems
- FEATURES: Quick dissolving, EPA approved formula, helps control algae growth, maintains water clean, clear, and sanitized
- ACTIVE INGREDIENTS: Sodium Dichloro-s-Triazinetrione Dihydrate
$73.99 -
2540-380 | 25 Sq. Ft. Filter Cartridge
- Genuine Jacuzzi Part, guaranteed quality and compatibility
- Compatible with JWB and Echo spas, 2001 and older hot tubs
- 25 square feet of filtration material for clean, clear water
$40.99$59.50 -
6473-158J | Jacuzzi Proclarity Depth Load Filter
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-161 for 2012 models of J-480, J-470, and J-465
$57.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
23434A | Leisure Time® Spa Mineral Purifier
- Creates softer, cleaner spa water
- Can be used with chlorine or bromine & with non-chlorine shock
- Lasts up to 4 months
- Use in spas / hot tubs up to 600 gallons
- Leisure Time 23434
$42.95 -
2472-014 | J300™ HYDROSOOTHE™ Massage Pillow (Front-Removable)
- Pillow: Massage, Front-removable, J-300 2020+
- OEM p/n 2472-014
- Pillow assembly consists of foam pillow (6455-036), inner ring (6541-427) inserted into pillow, and outer ring (6541-428) attached to back of inner ring.
- CAUTION: The original HYDROSOOTHE™ pillows were NOT able to be removed from the front of the spa. You will need to access the nuts at the back of the spa shell BEFORE pulling the pillow from the front of the shell.
- Installation Instructions
$72.95 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
303® Aerospace Protectant (1 gal)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$64.95 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
2540-384J | Jacuzzi® ProClear II Filter Cartridge
- GENUINE JACUZZI | Filter is made by the same company that made your hot tub, so you know it will work perfectly
- 25 SqFt AREA | The tight pleating exposes maximum surface area so the filter can hold more debris
- FOR J-400 HOT TUBS | This is a Jet Pump filter for J-460 and J-465 hot tubs only
$42.50