Shop
-
CoverMate III
- Ergonomically designed for ease of use
- Locking shock prevents unintentional closure
- Made in the USA
- Not compatible with round spa
- Lifter system sales are final sale
$399.00 -
CoverMate Freestyle
- The cover lift solution for round and uniquely shaped spas
- Adjustable mounting base that slides beneath the spa
- Requires approximately 20 inches of clearance behind the spa
- Positions cover away from the spa allowing full use
- Lifter system sales are final sale
$299.00 -
CoverMate I
- Step up your cover lift with the CoverMate I – Sundance Spas.
- Highest quality and most sold cover lift on the market.
- Sundance version with aluminum mounting brackets
- Lifter system sales are final sale
$299.00 -
CoverShelf
- Shelf arms fold flat against spa when not in use
- Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting bracket
- Works well on most unconventional shaped spas
- Lifter system sales are final sale
$199.00 -
CoverMate II
- Allow the open cover to rest in a lower position for a slightly less-obstructed view.
- Mounting system: screw-mounted low on the spa
- Made in the USA
- Not compatible with round spas
- Lifter system sales are final sale
$199.00$299.00 -
Safe-T Rail
-
Ultra-sturdy, rust-free construction
- 5-minute installation – two composite mounting brackets with 8 screws each
-
Foam grip for comfort and safety
-
Mounts on most above-ground spas
- Made of rust-free black powder-coated aluminum
- 48″ H with a 2-inch diameter pole
$179.00 -
-
SmartStep (Coastal Grey)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Black)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Portabello)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
100269 | Covermate I Sundance Bracket Kit
- Designed for the Leisure Concepts – Covermate I Sundance version
- Arm is interchangeable as the left or right side
- OEM part #100269
- Comes with left & right bracket, screw kit, 1 towelmate
$125.00 -
SpaGuard Soft Soak® TRIO® System
Combines 6 benefits into 1 easy-to-use kit
Soft Soak® TRIO™ makes spa care simple. The pre-measured packets eliminate the guesswork and the easy step numbers let you know exactly when to add them. This system works to:
- Soften water
- Clear water
- Destroy impurities
- Prevent scale
- Prevent corrosion
- Clean pipes and surfaces
$121.99 -
6000-383AJ2 | Jacuzzi Proclear Filter (2-pack)
- This 2-pack will make it easier to switch out both filters at the same time!
- Diameter: 6 3/4″ Length: 15 1/2″ Bottom: 2″ SAE thread
- Genuine Jacuzzi Parts
- Twist off cap accommodates PROCLEAR Mineral Spa Sanitizer
- Filtration Area: 60 SQ FT
- Cartridge lasts up to 18 months with routine care
*New part number 6000-383AJ* is the same as old part number 6000-383
$109.95 -
DuraStep II (Portobello)
- Large, slip-resistant tread for safety
- Tested up to 700 lbs
- Locks together in seconds
- Strong, stable and attractive
- Unique patented reversible tread design can accommodate round or square spas
$109.00$169.00 -
6541-397S | Sundance Filter Complete Assembly (164S & 165S)
- Sundance® Spas MicroClean® Ultra Complete Assembly, Part #6541-397 or 6541-397S
- Genuine OEM Sundance® Spas factory part
- This filter includes both the #6473-164 (inner filter cartridge) & #6473-165 (outer filter cartridge)
$105.95 -
6541-965S | Sundance Spas MicroClean® III 130FT² Pleated Filter (2024+)
- Sundance Spas MicroClean® III 130FT² Pleated Filter (6541-965S) – Single pleated filter
- New 2024 Filter Sundance 880™ Series 2024+
$99.95 -
SmartStep Jr (Black)
- Manufactured by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Includes a single SmartDrawer
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$99.00 -
Bullfrog® Spas A-R-X Series Filter (10-00282 2-pack)
Keep your water sparkling clear with genuine Bullfrog replacement filters
- To get clean water with minimal effort, Bullfrog also recommends the official Frog @Ease Mineral Sanitizing System.
- Part # 10-00282 is a genuine Bullfrog part, so you know it was designed with your spa in mind.
- Modern filtration media trap dirt, pollen, and microbes while allowing clear water to pass through.
$95.99 -
SpaGuard Brominating Tablets (4.5 lb)
- Organic brominating compound (BCDMH) in compressed 1-inch tablets
- Dissolve slowly and protect continuously
- Ideal for heavy bather loads and commercial spas
- Apply in a brominator or in a SpaGuard floating dispenser
$93.99 -
STIL Bullfrog® Spas Filter 10-00281 Two Pack
Keep your water sparkling clear with genuine Bullfrog replacement filters
These filters only fit Bullfrog STIL models.
- To get clean water with minimal effort, Bullfrog also recommends the official Frog @Ease Mineral Sanitizing System.
- Some Bullfrog hot tubs ship from the factory with white Wellspring filters. We don’t know why, but all replacement Wellspring filters are blue. Blue or white, these are genuine Bullfrog factory parts.
- We are factory-authorized Bullfrog dealers, so we take pride in our knowledge of Bullfrog’s catalog. If you’d like to talk to someone before you place your order, just give us a call.
- Part # 10-00281 is a genuine Bullfrog part, so you know it was designed with your STIL spa in mind.
- Modern filtration media trap dirt, pollen, and microbes while allowing clear water to pass through.
- Use less chlorine with a fresh filter.
$90.99 -
60-02022 | Filter Pillow for A-Series, 2020 – Present
- A-series Filter Pillow
- Color: Black.
- 2020 – Present
- Replaces old pillow part #60-101445
- Snapcap (60-1405) is needed to use 2-snap pillow (60-01445)
$90.50 -
6541-964S | MicroClean® 880™ Series Complete Filter Assembly (2024+)
- Complete Filter Assembly, which includes 6473-452S & 6473-453S
- New 2024 Filter Sundance 880™ Series 2024+ | 880™ Series | Filter: Microcln Ult 2pc
- Fibrous inner core filters the smallest particles – lasts up to 6 months
- Outer pleated filter removes large debris – lasts up to 18 months
- Use with SPAPURITY™ Mineral Sanitizer
$89.95 -
Hot Tub Things FROG® @ease® Starter Kit for Bullfrog Spas
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$89.50 -
Hot Tub Things FROG® @ease® Starter Kit for Sundance Spas
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$89.50 -
Hot Tub Things FROG® @ease Starter Kit for Jacuzzi Hot Tubs
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$89.50 -
60-01448 | Bullfrog Headrest for Cascadia (waterfall) JetPak seats, A Series 2020-present
- Bullfrog replacement headrest for A-Series Waterfall for Cascadia
- For Cascadia seating area, hole allows waterfall pedestal feature
- Bullfrog Part # 60-01448
- Fits Bullfrog A-Series tubs 2020+Present
- Durable, high-density foam material
$87.50 -
6540-507S | Sundance Spas Filter
- Sundance® Original 120sq ft. MicroClean II Filter (Part # 6540-507 and 6540-507s are the same)
- Exclusive Sundance® design with deep pleats optimized for your pump to last up to 18 months!
- Deluxe, quilted pleats capture more debris than smaller filters providing clean, clear water
- No inserts or additional parts needed; this filter alone can keep an 880 or 980 series hot tub clean
- Original Sundance® Filters – No Generics!!
$85.95 -
FROG @ease XL for Bullfrog Spas®, Simplicity SmartChlor Cartridge 3-pack
- Use only with Frog @ease mineral cartridge in FROG @ease sanitizing system
- includes: (3) Smartchlor (silver) cartridges
- Up to 75% less chlorine*
- Lasts 3-4 weeks for an average 400 Gallon Tub
- Smart, easy, and recyclable
$84.95 -
6473-249S | Sundance® 680™ Microclean Mini Filter Outer
- Microclean Mini Filter (OUTER ONLY)
- Outer pleated filter removes large debris
- Lasts up to 12 months
- Use with only Sundance Microclean Mini Inner Filter
$84.50 -
6472-841 | Sundance / Jacuzzi CLEARRAY XL Replacement Bulb
- Effective Sanitation: The ClearRay Water Management System kills 99.9% of waterborne pathogens in your hot tub. A fresh, functional CLEARRAY Bulb is the heart of this modern sanitizer.
- Economical Choice: Each CLEARRAY XL bulb is rated to last one year under normal usage, keeping your bathers safe and your water clean, clear, and free of algae and bacteria. If your bulb is over a year old, it may be time for a replacement.
- Safe for Bathers: The CLEARRAY Water Management System is inside the circulation pipes of your Sundance or Jacuzzi brand spa. Water from your spa is drawn into the UV treatment chamber, naturally sanitized, then returned to the bathing area.
- Reduces Chemical Load: Hot tubs treated with anti-microbial lights require fewer chemicals at lighter concentrations to sanitize and provide the same level of safe, clear water.
$82.50 -
6540-488S | Sundance Spas Filter
- Sundance® Original 125sq ft. Filter
- Exclusive Sundance® design is optimized for your pump and lasts up to 18 months!
- Reemay pleated filter with large surface area captures more debris than smaller filters providing clean, clear water.
- Original Sundance® Filters
$82.50 -
6472-702 | Sundance Cushion Filter Lid
- Aftermarket Seat Pillow converts lid into functional seat
- only works with OEM Acrylic lid for 2018 & 2019 Marin/Cambria
- Fits Into Integrated Beverage Concierge
$81.25 -
6541-468S | Sundance® 680™ Pleated Filter
- Pleated filter with large surface area captures more debris
- Lasts up to 12 months
- Pleatco & Sundance OEM 6473-468S
- Can substitute 6473-249S & 6473-283S
- Can substitute 6541-460S
$79.50 -
60-01447 | Bullfrog Headrest for Neck JetPaks seats, A Series 2020-present
- Replacement headrest for use with NeckMasseusse and/orNeckBlaster JetPaks.
- Fits A Series spas, 2020-present.
- Bullfrog part #60-01447
- High-density foam material.
$79.50 -
60-01381 | Bullfrog Headrest for regular JetPaks, A Series (2020-present)
- Bullfrog part #60-01381
- Bullfrog replacement headrest for A-Series JetPaks
- For standard JetPaks. Does not fit filter lid or neck-specific JetPaks, NeckMasseuse or Neckblacket.
- Fits Bullfrog A-Series tubs 2020 – present
- Durable, high-density foam material
$79.50 -
10-00814 | Simplicity™ Flat Filters
No more soaking or spraying out your dirty filters. When it’s time just swap it out for a new one and enjoy clean crystal clear water.
- Replaces old part #40-00843
- Package of 4 filters.
$78.50 -
SpaGuard Brominating Concentrate (6 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$77.99 -
6473-165S | Sundance Spas MicroClean Filter Ultra Outer
Please Note: This is an outer filter only. Doesn’t include Sundance 6473-164 inner filter cartridge
- This is the OUTER FILTER ONLY. Doesn’t include Sundance 6473-164 inner filter cartridge. Again this doesn’t include the inner filter cartridge. You’ll have to buy the inner cartridge as well for a proper fitting in the spa.
- Works with: 880 Series year 2009 +
- Works with: 850 and 880 Series years 2005-2008
- Fits all Sundance Maxxus 2009 +, Optima 2009 +, Cameo 2009+, Majesta 2009 +, Altamar 2009 +, Marin 2009 + and Capri 2009+
$77.95 -
60-03603 | Neck Headrest (A Series™ Standard) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$77.85 -
6455-423 | Sundance Spa® Wrap Pillow w/ Suction Cups
- Wrap Around Pillow for 1986-1997 SUNDANCE® Spas
- “suction cup” style pillow which replaced older “ball and socket” style pillows
- OEM Sundance part #6455-423
$77.75 -
6472-839 | Sundance Wrap Around Gray Pillow 1998+
- Wrap around pillow for Sundance Spas 1998-2000
- Includes 3 suction cups
- Formerly OEM part #6455-447
$76.95 -
60-02218 | Main Headrest (A Series™ Plus & Select) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$75.87 -
100561 | Covermate I Sundance Right Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the right side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100562
$75.00 -
100561 | Covermate I Sundance Left Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the left side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100561
$75.00 -
100504 | Covermate III Plastic – Right Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the rightside mounting bracket
- OEM part #100504
$75.00 -
100503 | Covermate III Plastic – Left Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the left side mounting bracket
- OEM part #100503Covermate III Plastic Installation Instructions
$75.00 -
FROG @ease XL for Bullfrog Spas®, Simplicity Filter System
- Compatible with Bullfrog Spas 2024+
- Ideal for M Series™ & A Series™ in 8 & 9 sizes
- Includes: (1) Mineral (blue cartridge), (1) SmartChlor (silver cartridge), (1) FROG @ease Test Strips, (1) FROG Jump Start packet
- Kills bacteria 2 ways with minerals & Chlorine
- up to 75% less chlorine*
- shock only once a month
- No touching or measuring chlorine
$74.95