Shop
-
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-302 | Screw: 8X1-5/8 PHD 305 S/S (Gray)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-394 | Screw: 8X1-5/8 PHD S/S (Mahogany)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-393 | Screw: 8X1-5/8 PHD S/S (Gray)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
6570-231 | Sundance® / Jacuzzi® Pillow Attachment Screw
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
$2.99 -
6540-213 | Large Spa Filter Drain Cover
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
TEAR-AID® Repair Patch: Vinyl Type B
TEAR-AID type B has a unique adhesive that resists the oils in vinyl that causes other adhesives to soften and turn gummy in sunlight.
Kit Includes:
(1) 7/8″ square patch.
(1) 3/8″ square patch.
(1) 12″ Reinforcement Filament for repairing tears at edges.
(1) 3″ x 12″ TEAR-AID patch – cuts with scissors to any size.
$10.95 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
2540-389 | Jacuzzi ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
6570-398 | Jacuzzi® Mesh Skimmer Debri Bag w/11 Clip Holes
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
SilkBalance Clean Start – Plumbing Line Cleaner
- Fast, powerful, safe, and low foam results in 30 minutes or less
- Purges the plumbing system and hot tub accessories
- Eliminates slime and sludge in jets and plumbing lines
- Proprietary formula detoxes your spa but safe to use immediately after
- 1 botte / 1 dose
$24.99 -
2455-105 | Jacuzzi J-300 Pillow (back mount)
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
2455-104 | Jacuzzi J-300 Pillow (insert only)
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
6455-007 | jacuzzi® J-300 Collection (2002-2006)
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
DISCONTINUED | 60-1165 | Bullfrog Air Comfort Pillow (2002-2012)
- This pillow is now discontinued – Once inventory is depleted, the pillow will not be restocked.
- Air Comfort 10 1/8″ wide replacement spa pillow
- select model Bullfrog Spas made between 2009-2012
- Snaps into jet packs
- Replaced by part #60-1160
$29.89 -
2472-831 | Jacuzzi® J215/J225™ Pillow
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-822 | Jacuzzi® J-400 Series Pillow (2006-2009)
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
2472-828 | Jacuzzi J-200 Pillow
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Soft and Comfortable – Restore your spa to its original look and comfort
$32.50 -
-
6455-468 | Jacuzzi® J-200 Series Snap-In Pillow
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
2472-006 | Jacuzzi J-LX/J-LXL Pillow 2011+ (6455-485)
- Jacuzzi J-LX/J-LXL Pillow Replacement
- 2011+
- Snap-in
$34.50 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
6473-161J | Jacuzzi Proclarity Depth Load Filter
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-157 (All 2013+ models of J-400 series Jacuzzi hot tubs)
- Use with Jacuzzi Filter 6473-158 for 2012 models of J-480, J-470, and J-465
$34.95 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
60-01797 | Standard Pillow (SWIM SERIES™) 2022+
- Function design for the new SWIM SERIES™
- Used on S150 & S200 2022+
- Premium Headrest Design
$35.18 -
10-00417 | Bullfrog® Spas Core Cage Filter Adapter (2017 – Present)
Upgrade to the Latest Bullfrog Filtration
Bullfrog Spas retain their luxury and value because they are upgradeable by design. This filter cartridge adapter brings new levels of comfort and clarity to your spa. Even if your Bullfrog was made before 2017, you can still use the latest Bullfrog/Wellspring filter cartridges. This simple plastic cage fits inside Bullfrog 10-00282 or Bullfrog 10-00281 filters (not included). Without any tools or headache, you can have your Bullfrog hot tub using the latest filters!
This adapter is compatible with most Bullfrog Spa models:
- A-Series pre-2017
- R-Series pre-2017
- X-Series pre-2017
- STIL Series pre-2017
If you have doubts, please contact us before purchasing. We want you to be thrilled with your purchase, and that means making sure you only buy what you need. Many Bullfrog hot tubs use filters in pairs, so you may need two of these adapters. The adapter should last you for several years; please keep it as you clean and replace filters.
If your hot tub is from 2017 or newer, you don’t need this filter cartridge adapter. Why not upgrade your spa with an official Bullfrog @Ease automatic sanitizing system instead?
$35.50 -
6472-859 | Jacuzzi® & Sundance® ClearRay Quartz Tube
- GENUINE CLEARRAY | This genuine ClearRAY tube is made by Sundance Spas, part # 6472-859
- GUARANTEED COMPATIBLE | Tube fits CLEARRAY XL bulbs in both Sundance Spas and Jacuzzi-brand hot tubs
- CRYSTAL CLEAR | The pure mineral quartz of this tube provides optimal light pass-through so you get maximum UV sanitation efficiency
- INSTALLATION KIT | Comes with latex glove (fingerprints can shorten system life) and complete instructions
- As of Summer 2019, an O-ring is not included with the replacement tube.
$35.99 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
DISCONTINUED | 60-1250 | R Series Neck Gray (2013-2018)
- Bullfrog replacement headrest for R-Series JetPak
- Bullfrog Part # 60-1250 (now discontinued – will not be restocked)
- Fits Bullfrog R-Series tubs 2013–2015 with Neck jets
- Durable, inflatable rubber pillows
- Replace with new part # 60-00948
$36.99 -
60-01335-01 | Bullfrog Headrest, M Series (2020-present)
- Bullfrog replacement headrest for M-Series JetPak
- Color – Cool Grey.
- Bullfrog Part # 60-01335-01
- Fits Bullfrog M-Series tubs 2020–onward
$38.50 -
60-1160 | Bullfrog Air Comfort Headrest (2002-2012)
- Air Comfort Headrest
- Color: Black.
- Fits all Bullfrog Spas & Tadpole spas
- 2002-2012
- Replaces the gray pillow part #60-1165
$38.50 -
60-1390 | Bullfrog Headrest, X-Series (2015-present)
- Replacement headrest for X Series spas
- High density foam
- Gray
- 2015-present
$39.50 -
2890-185 | Jacuzzi® ProClear™ Mineral Spa Sanitizer
- Exclusively designed to work in your Jacuzzi Hot Tub. Simply drops right into your filter
- Works with your existing filtration system
- Hassle-free maintenance
- Leaves water softer and clearer
- Controlled Release Technology (CRT) ensures optimal mineral levels and no staining
$40.50 -
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
- Hydrosoothe installation
$40.50 -
2472-005 | Jacuzzi J-500 Pillow
- Replaces old part #2455-266
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$40.50 -
2540-380 | 25 Sq. Ft. Filter Cartridge
- Genuine Jacuzzi Part, guaranteed quality and compatibility
- Compatible with JWB and Echo spas, 2001 and older hot tubs
- 25 square feet of filtration material for clean, clear water
$40.99$59.50 -
60-00777 | Headrest for Neck Jet (X SERIES™) 2018-2021
- Headrest for use with neck jets
- Fits X Series spas with neck jets
- Compatibility: 2018-present.
$41.95 -
2472-826 | Jacuzzi J-300 Series Pillow Base and insert (2007+)
- Genuine Jacuzzi brand part
- Perfect match for your older J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 2455-104 insert
$42.50