Shop
Want to keep your stuff looking newer, longer? When UV protection and surface finish matter to you, 303 Products has the solution.
-
100004 | Covermate I | Left or Right Pivot Arm
- Designed for the Leisure Concepts – Covermate I system
- Arm is interchangeable as the left or right side
- OEM part #100004
$48.95 -
100028 | CMIII Right Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the left side support arm
- OEM part #100028
$60.00 -
100029 | CMIII Left Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the right side support arm
- OEM part #100029
$60.00 -
100150 | Safe-T Rail Foam Grip
- Compatible with Leisure Concepts Products
- Comes as a set of 1
- OEM #100150
- Length = 19.5 inches
$25.00 -
100269 | Covermate I Sundance Bracket Kit
- Designed for the Leisure Concepts – Covermate I Sundance version
- Arm is interchangeable as the left or right side
- OEM part #100269
- Comes with left & right bracket, screw kit, 1 towelmate
$125.00 -
100561 | Covermate I Sundance Left Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the left side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100561
$75.00 -
100561 | Covermate I Sundance Right Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the right side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100562
$75.00 -
2472-014 | J300™ HYDROSOOTHE™ Massage Pillow (Front-Removable)
- Pillow: Massage, Front-removable, J-300 2020+
- OEM p/n 2472-014
- Pillow assembly consists of foam pillow (6455-036), inner ring (6541-427) inserted into pillow, and outer ring (6541-428) attached to back of inner ring.
- CAUTION: The original HYDROSOOTHE™ pillows were NOT able to be removed from the front of the spa. You will need to access the nuts at the back of the spa shell BEFORE pulling the pillow from the front of the shell.
- Installation Instructions
$72.95 -
60-00777 | Headrest for Neck Jet (X SERIES™) 2018-2021
- Headrest for use with neck jets
- Fits X Series spas with neck jets
- Compatibility: 2018-present.
$41.95 -
60-01797 | Standard Pillow (SWIM SERIES™) 2022+
- Function design for the new SWIM SERIES™
- Used on S150 & S200 2022+
- Premium Headrest Design
$35.18 -
60-02218 | Main Headrest (A Series™ Plus & Select) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$75.87 -
60-02839 | Main Headrest (A Series™ Standard) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$46.27 -
60-03033 | Neck Headrest (A Series™ Plus & Select)
- Neck Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
Trim package compatibility
-
2023 A Series™ Standard- 2023 A Series™ Plus
- 2023 A Series™ Select
$74.89 -
60-03603 | Neck Headrest (A Series™ Standard) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$77.85 -
6455-007 | jacuzzi® J-300 Collection (2002-2006)
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6540-213 | Large Spa Filter Drain Cover
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
6541-853J | ProClassic™ J-200™ Filter (2023+)
- Performance and fit qualified to Jacuzzi factory standards
- Genuine replacement filter for Jacuzzi 2023+ J-200 Models; J-285, J-275, J-245, J-235, J-225 and J-215
- Rinseable filter can be used for up to 18 months (sold separately)
- Use with 2-in-1 Frog @Ease SmartChlor & Mineral Cartridge Holder & exclusive Jacuzzi cartridges (purchased separately)
- Use of non Jacuzzi branded parts can adversely affect the quality of your spa experience. Damage to the hot tub due to unauthorized parts and accessories may void the warranty
$69.95 -
6570-302 | Screw: 8X1-5/8 PHD 305 S/S (Gray)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-393 | Screw: 8X1-5/8 PHD S/S (Gray)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-394 | Screw: 8X1-5/8 PHD S/S (Mahogany)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-398 | Jacuzzi® Mesh Skimmer Debri Bag w/11 Clip Holes
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
CoverMate Freestyle
- The cover lift solution for round and uniquely shaped spas
- Adjustable mounting base that slides beneath the spa
- Requires approximately 20 inches of clearance behind the spa
- Positions cover away from the spa allowing full use
- Lifter system sales are final sale
$299.00 -
CoverMate I
- Step up your cover lift with the CoverMate I – Sundance Spas.
- Highest quality and most sold cover lift on the market.
- Sundance version with aluminum mounting brackets
- Lifter system sales are final sale
$299.00 -
CoverMate II
- Allow the open cover to rest in a lower position for a slightly less-obstructed view.
- Mounting system: screw-mounted low on the spa
- Made in the USA
- Not compatible with round spas
- Lifter system sales are final sale
$199.00$299.00 -
CoverMate III
- Ergonomically designed for ease of use
- Locking shock prevents unintentional closure
- Made in the USA
- Not compatible with round spa
- Lifter system sales are final sale
$399.00 -
CoverShelf
- Shelf arms fold flat against spa when not in use
- Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting bracket
- Works well on most unconventional shaped spas
- Lifter system sales are final sale
$199.00 -
FROG @ease 2-in-1 Water Care™ Floating Sanitizing System
- Sold exclusively at Jacuzzi® Group Retailers and Locations.
- Each box comes with 1x FROG Sanitizing Minerals™ and 1x SmartChlor
- Compatible with the 2-in-1, Jacuzzi® (p/n 6720-412), or Sundance® Spas (p/n 6473-315)
$56.95 -
FROG @ease 2-in-1 Water Care™ Floating SmartChlor Cartridge (3-Pack)
- Sold exclusively at Jacuzzi® Group Retailers and Locations.
- Each box comes with 3 SmartChlor Cartridges (silver cartridge)
- Compatible with the 2-in-1, Jacuzzi® (p/n 6720-412), or Sundance® Spas (p/n 6473-315)
$53.95 -
FROG @ease for Bullfrog Spas®, Simplicity Filter System
- Compatible with Bullfrog Spas 2024+
- Ideal for M Series™ & A Series™ spas in 5, 6 & 7 sizes
- includes: (1) Mineral (blue cartridge), (1) SmartChlor (silver cartridge), (1) FROG @ease Test Strips, (1) FROG Jump Start packet
- Kills bacteria 2 ways with minerals & chlorine
- Up to 75% less chlorine*
- shock only once a month
- No touching or measuring chlorine
$56.95 -
FROG @ease for Bullfrog Spas®, Simplicity SmartChlor Cartridge 3-pack
- Use only with Frog @ease mineral cartridge in FROG @ease sanitizing system
- includes: (3) Smartchlor (silver) cartridges
- Up to 75% less chlorine*
- Lasts 3-4 weeks for an average 400 Gallon Tub
- Smart, easy, and recyclable
$56.95 -
FROG @ease XL for Bullfrog Spas®, Simplicity Filter System
- Compatible with Bullfrog Spas 2024+
- Ideal for M Series™ & A Series™ in 8 & 9 sizes
- Includes: (1) Mineral (blue cartridge), (1) SmartChlor (silver cartridge), (1) FROG @ease Test Strips, (1) FROG Jump Start packet
- Kills bacteria 2 ways with minerals & Chlorine
- up to 75% less chlorine*
- shock only once a month
- No touching or measuring chlorine
$74.95 -
FROG @ease XL for Bullfrog Spas®, Simplicity SmartChlor Cartridge 3-pack
- Use only with Frog @ease mineral cartridge in FROG @ease sanitizing system
- includes: (3) Smartchlor (silver) cartridges
- Up to 75% less chlorine*
- Lasts 3-4 weeks for an average 400 Gallon Tub
- Smart, easy, and recyclable
$84.95 -
High Duty Wind Straps (Set of 2)
- Additional security to hold down your spa cover
- Adjustable length: 92″ to 136″ (230cm to 345cm) and 1.5″ (3.8cm) wide
- Fits spas from 6ft to 9ft (1.8m to 2.7m)
- Stainless screws included and plastic buckles (pinch) included | locking keys
$27.75 -
Safe-T Rail
-
Ultra-sturdy, rust-free construction
- 5-minute installation – two composite mounting brackets with 8 screws each
-
Foam grip for comfort and safety
-
Mounts on most above-ground spas
- Made of rust-free black powder-coated aluminum
- 48″ H with a 2-inch diameter pole
$179.00 -
-
SmartStep (Black)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Coastal Grey)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Portabello)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep Jr (Black)
- Manufactured by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Includes a single SmartDrawer
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$99.00 -
SpaGuard Brominating Concentrate (2 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$27.99 -
SpaGuard Brominating Concentrate (6 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$77.99 -
SpaGuard Enhanced Shock (6 lb)
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$52.99