Shop
-
6541-965S | Sundance Spas MicroClean® III 130FT² Pleated Filter (2024+)
- Sundance Spas MicroClean® III 130FT² Pleated Filter (6541-965S) – Single pleated filter
- New 2024 Filter Sundance 880™ Series 2024+
$99.95 -
6541-964S | MicroClean® 880™ Series Complete Filter Assembly (2024+)
- Complete Filter Assembly, which includes 6473-452S & 6473-453S
- New 2024 Filter Sundance 880™ Series 2024+ | 880™ Series | Filter: Microcln Ult 2pc
- Fibrous inner core filters the smallest particles – lasts up to 6 months
- Outer pleated filter removes large debris – lasts up to 18 months
- Use with SPAPURITY™ Mineral Sanitizer
$89.95 -
6473-452S | MicroClean® 880™ Series Outer Filter (2024+)
- New 2024 Filter Sundance 880™ Series 2024+
- Use only with Sundance branded filter: 6473-452S (sold separately)
- Use with SPAPURITY Mineral Sanitizer
$60.50 -
6473-453S | MicroClean® 880™ Series Inner Filter (2024+)
- New 2024 Filter Sundance 880™ Series 2024+
- Use only with Sundance branded filter: 6473-452S (sold separately)
- Use with SPAPURITY Mineral Sanitizer
$38.95 -
6570-393 | Screw: 8X1-5/8 PHD S/S (Gray)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-394 | Screw: 8X1-5/8 PHD S/S (Mahogany)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
SpaGuard® Rapid-Dissolve Chlorinating Tabs (1.25 lb)
- Quick-dissolving sanitizer and oxidizer
- Single-dose, 1” tab per 300/600 gallons – 1200-2700 liters weekly
- Administers 3-5ppm of free chlorine
$34.99 -
SpaGuard® Rapid-Dissolve Alkalinity Increaser Tabs (1.25 lb)
- Control pH bounce by quickly raising total alkalinity
- Helps protect equipment from corrosion
- 2 tabs per 250 gallons – 1000 liters as needed
- Raises total alkalinity by 30 ppm
$15.99 -
SpaGuard® Rapid-Dissolve pH Decreaser Tabs (1.25 lb)
- Quickly decrease pH level of spa water
- Provide soaker comfort and protect spa and swim spa equipment
- 2 tabs per 250 gallons – 1000 liters as needed
- Lowers pH 0.1 – 0.2 units
$12.99 -
SpaGuard® Rapid-Dissolve Shock Oxidizing Tabs (1.25 lb)
- Non-chlorine shock-oxidizer
- Quickly oxidizes non-living waste and contaminants**
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spas for 12+ weeks
$23.99 -
SpaGuard® Rapid-Dissolve Stain & Scale Tabs (1.25 lb)
- Controls metal-based staining & scaling
- Protects spa and swim spa equipment and surfaces
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spa for 12+ weeks
$28.99 -
TEAR-AID® Repair Patch: Vinyl Type B
TEAR-AID type B has a unique adhesive that resists the oils in vinyl that causes other adhesives to soften and turn gummy in sunlight.
Kit Includes:
(1) 7/8″ square patch.
(1) 3/8″ square patch.
(1) 12″ Reinforcement Filament for repairing tears at edges.
(1) 3″ x 12″ TEAR-AID patch – cuts with scissors to any size.
$10.95 -
6570-302 | Screw: 8X1-5/8 PHD 305 S/S (Gray)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
2472-014 | J300™ HYDROSOOTHE™ Massage Pillow (Front-Removable)
- Pillow: Massage, Front-removable, J-300 2020+
- OEM p/n 2472-014
- Pillow assembly consists of foam pillow (6455-036), inner ring (6541-427) inserted into pillow, and outer ring (6541-428) attached to back of inner ring.
- CAUTION: The original HYDROSOOTHE™ pillows were NOT able to be removed from the front of the spa. You will need to access the nuts at the back of the spa shell BEFORE pulling the pillow from the front of the shell.
- Installation Instructions
$72.95 -
SpaGuard Natural Spa Enzyme (32 oz)
• Enzyme formulation breaks down oils naturally
• pH~3.0-4.5
• Reduces scum line build-up and odors
• Controls cloudy water
• Improves Filtration
• Reduces maintenance time
• Keeps spa clean longer$26.99 -
FROG @ease 2-in-1 Water Care™ Floating SmartChlor Cartridge (3-Pack)
- Sold exclusively at Jacuzzi® Group Retailers and Locations.
- Each box comes with 3 SmartChlor Cartridges (silver cartridge)
- Compatible with the 2-in-1, Jacuzzi® (p/n 6720-412), or Sundance® Spas (p/n 6473-315)
$53.95 -
FROG @ease 2-in-1 Water Care™ Floating Sanitizing System
- Sold exclusively at Jacuzzi® Group Retailers and Locations.
- Each box comes with 1x FROG Sanitizing Minerals™ and 1x SmartChlor
- Compatible with the 2-in-1, Jacuzzi® (p/n 6720-412), or Sundance® Spas (p/n 6473-315)
$56.95 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
6541-853J | ProClassic™ J-200™ Filter (2023+)
- Performance and fit qualified to Jacuzzi factory standards
- Genuine replacement filter for Jacuzzi 2023+ J-200 Models; J-285, J-275, J-245, J-235, J-225 and J-215
- Rinseable filter can be used for up to 18 months (sold separately)
- Use with 2-in-1 Frog @Ease SmartChlor & Mineral Cartridge Holder & exclusive Jacuzzi cartridges (purchased separately)
- Use of non Jacuzzi branded parts can adversely affect the quality of your spa experience. Damage to the hot tub due to unauthorized parts and accessories may void the warranty
$69.95 -
6472-839 | Sundance Wrap Around Gray Pillow 1998+
- Wrap around pillow for Sundance Spas 1998-2000
- Includes 3 suction cups
- Formerly OEM part #6455-447
$76.95 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
SpaGuard Brominating Concentrate (6 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$77.99 -
SpaGuard Brominating Concentrate (2 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$27.99 -
6541-468S | Sundance® 680™ Pleated Filter
- Pleated filter with large surface area captures more debris
- Lasts up to 12 months
- Pleatco & Sundance OEM 6473-468S
- Can substitute 6473-249S & 6473-283S
- Can substitute 6541-460S
$79.50 -
6473-249S | Sundance® 680™ Microclean Mini Filter Outer
- Microclean Mini Filter (OUTER ONLY)
- Outer pleated filter removes large debris
- Lasts up to 12 months
- Use with only Sundance Microclean Mini Inner Filter
$84.50 -
6473-283S | Sundance® 680™ Microclean Mini Filter Inner
- Microclean Mini Filter (INNER ONLY)
- Two stage filtration | Inner spun-bound microfiber filters the smallest particles
- Inner spun-bound microfiber filters the smallest particles
- Lasts for up to 4 months
- Use with only Sundance Microclean Mini Outer Filter
$46.50 -
6473-446 | Sundance® 680™ Series Pillow 2023+
- Sundance 680 Series Replacement Pillow 2023+
- OEM #6473-446 (6455-038)
- For compatibility, see production description below.
- Warranty: Covered up to the day of delivery or installation
$59.50 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6472-682 | Sundance® Spas 880 Series Drink Tray 2009+
- Sundance Spas drink tray used on spas manufactured 2009+
- Installation on top of the filter lid
- OEM part #6472-682
$42.50 -
6472-540 | Sundance® Spas 850 Series Drink Tray 2000-2008
- Sundance Spas drink tray used on spas manufactured from 2000-2008
- Installation on top of the filter lid
- OEM part #6472-540
$48.00 -
6455-465 | Sundance® Spas Wrap Around Pillow Without Insert
- Sundance® Spas Wrap Around Pillow
- Compatible with 2001-2008 spa model
- Does not come with the insert pillow (part #6455-472)
- Does not come with the mounting screws (part #6570-231)
$59.95 -
6540-213 | Large Spa Filter Drain Cover
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
6570-398 | Jacuzzi® Mesh Skimmer Debri Bag w/11 Clip Holes
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
6455-007 | jacuzzi® J-300 Collection (2002-2006)
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
SpaGuard Spa Sentry® (32 oz)
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$25.99 -
373045J | Jacuzzi J-200 50 Sq/Ft Filter
- GENUINE JACUZZI HOT TUB PARTS | Manufactured by Jacuzzi
- GUARANTEED COMPATIBLE | compatible with Sundance Spas that use filter 373045S
- CLEAN, CLEAR PERFORMANCE
- Height: 9”, Diameter: 6” 45 square feet of filtration material
$49.50 -
SpaGuard Enhanced Shock (6 lb)
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$52.99 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
6472-766 | Sundance 980 Series 2019+
- Pillow: 2019+ 980 Series (Lisbon only)
- Replaced 6455-024
$38.99 -
6472-974 | Sundance Pillow for Sweetwater Spas
- OEM ball and socket Sundance Sweetwater pillow
- Sundance Sweetwater Spas replacement pillow
- Replaces 6455-451
$35.50