Genuine Hydropool® 1.5" cabinetry screw designed to attach and secure exterior spa panels and trim components. Specifically sized for tight, secure fits that reduce vibration and prevent cabinet loosening over time. Grey color finish offers a clean, low-profile look that matches Hydropool cabinet styling from recent model years. Corrosion-resistant coating protects the screw from rust, moisture damage, and exposure to spa chemicals. Commonly used in Self-Cleaning and Serenity Series Hydropool spas—ideal for OEM-quality repairs or replacements. Easy to install with a standard drill or screwdriver using pre-drilled cabinet slots or existing mounting holes. Helps maintain cabinet alignment and panel stability through seasonal expansion and contraction. A must-have hardware item for spa technicians, installers, or DIY maintenance on Hydropool cabinetry.

Genuine Hydropool® 2-inch grey screw designed to secure gap lap trim components in select spa cabinet models. Ideal for maintaining cabinet integrity by preventing siding shifts or loose trim due to weather, movement, or wear. Features a corrosion-resistant finish that stands up to spa chemicals, moisture exposure, and outdoor environments. Grey coating blends seamlessly with standard Hydropool cabinet trim for a discreet, professional-looking installation. Commonly used in Hydropool Self-Cleaning and Serenity series spas from 2010 onward. Precision threading provides a tight, vibration-resistant hold that lasts through seasonal expansion and contraction. Designed to be easy to install or replace using standard power tools or a handheld screwdriver. Useful for spa techs, dealers, or homeowners performing maintenance, repairs, or upgrades to Hydropool cabinetry.

Designed for standard 5″ Jacuzzi/Sundance/Sweetwater spa drains, this elastic-mesh bag (part #6540‑213) captures leaves, hair, bugs, and other debris before they clog filters or damage equipment. Made from durable, fine polyester mesh with a strong elastic rim that stretches to fit securely around flanged or recessed drains without tools. Lightweight and compact, it installs easily and is reusable—simply rinse, machine wash, and air dry to keep spa clean. Fine mesh design maintains full water flow while reducing skimmer load, filter wear, and pump strain caused by large particulate matter. Affordable preventive maintenance that prolongs equipment life and reduces filter cleaning frequency, suitable for regular spa upkeep.

OEM flow switch with clear tee fitting for Jacuzzi® & Sundance® one-pump spas built from June 1999 through 2004 (excludes 2001+ Capri models). Features ¾″ barbed inlet/outlet and ⅜″ side tube for seamless heater plumbing integration. Transparent housing allows visual verification of water flow without disassembly. Rated for low-voltage (30 VAC/60 VDC) operation and switches at 0.5 Amp, 10 W—designed for spa heater safety. Durable plastic and copper construction ensures corrosion-resistant, long-lasting use. Easy twist-out replacement—plugs directly into spa shell assembly.

Genuine Jacuzzi® skimmer shield for J‑200 spas (2023+ Platinum color) Protects skimmer basket and plumbing from debris and UV damage Precision-molded to match spa OEM dimensions and color finish Heavy-duty ABS plastic ensures rugged durability and longevity Easy snap-on installation with no tools required Helps maintain optimal water flow and filtration efficiency Skimmer Shield for J-200 Series modes. Used on Applicable Models in the J-200 Series from 2023+

This Jacuzzi® OEM clip (part #6570‑398) is the standard pillow retainer for many J‑300 and J‑400 spa models, including J‑385 through J‑495, and J‑500 series (J‑575, J‑585), designed to hold pillow inserts securely in place under various conditions. Made of sturdy injection-molded thermoplastic, it resists warping and corrosion, ensuring years of reliable performance even in hot, wet spa environments. Measuring 1.88″ × 0.88″ × 0.75″ and weighing only 0.03 lb, it delivers OEM-level fit and feel without altering spa aesthetics. Installation is tool-free: just snap into the pillow bracket behind the shell; this clip locks the pillow to prevent slipping during jet activity or user movement, improving comfort and safety. Designed for hassle-free replacement—if your pillow has loosened or fallen out, installing this clip restores proper tension and positioning in under one minute. Backed by strong user approval: with 170+ reviews praising its perfect fit, ease of replacement, and durability under regular spa use.

The Jacuzzi® ProClarity Mesh Skimmer Debris Bag (6570‑392) is a genuine OEM accessory designed to enhance your spa’s skimmer performance by trapping surface debris before it reaches the main filter. Ideal for J‑LX/LXL (2011+) and J‑300 (2002–2013) series spas, this mesh bag installs with seven clip holes—six around the rim and one bottom hole—for stable fitment and reliable operation. Compatible with J‑LX/LXL (2011+) and J‑300 (2002–2013) spas Seven clip‑in holes (6 top, 1 bottom) ensure secure attachment Fine mesh material captures leaves, bugs, and floating debris OEM Jacuzzi part (#6570‑392) guarantees precise fit and quality Easy maintenance—simply remove, rinse, and reinstall Lightweight and reusable, reducing filter strain and extending service intervals

The Jacuzzi® ProPolish Filter Bag (part # 2540‑389) is an OEM-quality mesh bag made to pre-filter large debris before it reaches your spa’s cartridge, preserving equipment and improving maintenance: Designed for Jacuzzi J‑400 Series hot tubs (2006–2012; excludes J‑495, J‑425, J‑415) Replaces older filter bag part numbers 6540‑512, 6540‑513, 20076‑001, 6540‑496 Dimensions: 6.26" × 7.913" × 5.157" Durable, reusable mesh; hand‑wash only (dish soap + triple‑rinse); lasts about two seasons Helps maintain water flow, prolong cartridge life, and reduce cleaning frequency OEM-grade build, backed by Jacuzzi dealer support (wear‑and‑tear not covered)

Gray stainless PHD screw (8 × 1-5/8) used in Jacuzzi® spa panels and accessories. Corrosion-resistant for long-lasting hold. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

Mahogany PHD stainless screw (8 × 1-5/8) for Jacuzzi® spa shell and pillow components. Factory part color-matched for a polished install. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

Jacuzzi® PHD stainless screw (8 × 1-5/8) in teak finish. OEM replacement for securing spa headrests, trim, and accessories. Rust-resistant, color-blended. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

OEM short-tip temperature sensor (#6600‑166) with curled-finger connector, designed for jacuzzi and sundance spas. Stainless steel sensor housing with 12-foot lead wire ensures accurate temperature readings. Compatible with a wide range of models: J‑200, J‑300, J‑310–340, J‑365–385, Solo, 701, 724, 680, 780/850E, Sweetwater, Portofino, Del Sol, J‑LX/LXL, and more. Designed to replace older sensors such as 6600‑070 and 6000‑021, with enduring OEM reliability. Rugged build stands up to typical spa conditions—no returns accepted due to electronic part regulations.

Genuine Jacuzzi® brand replacement skimmer weir filter, part #6540‑188 Specifically designed for J‑LX and J‑LXL hot tub models manufactured from 2011 to present Regulates water flow into the skimmer and filter area, helping maintain efficient debris capture Floating flap design improves surface water circulation and optimizes filter performance Molded from UV- and chemical-resistant plastic for long-term durability in spa environments Helps prevent debris from floating back into the spa when the pump is turned off Easy to install—simply slides into the skimmer housing, no tools required Essential for maintaining optimal filtration and clean water in Jacuzzi® J‑LX and J‑LXL spas

OEM temperature sensor designed for Jacuzzi® and Sundance® spa systems using a box-end connector. Includes a 12-foot cable, allowing flexible routing to the control board without extensions or splicing. Stainless-steel sensor head delivers precise water temperature readings and reliable performance. Compatible with Jacuzzi® J‑300 and J‑400 Series spas (2002–2006) and Sundance® 880 Series (2005+) systems. Also fits older Sundance models from 1992 onward and replaces legacy sensors including 6600‑105, 6600‑134, and 6600‑138. Installs into the filter reservoir; requires O‑ring part #6540‑228 (sold separately). Plug-and-play installation using the factory-style box-end connector—no wiring skills needed. Ensures accurate temperature control and communication with spa controls and safety systems.

Genuine Sundance® & Jacuzzi® OEM small mesh filter cover designed for select spas manufactured between 1997 and 2003 Protects the filter cartridge by preventing large debris and foreign objects from entering the filtration system Durable mesh material resists wear and tear from repeated use and water exposure Ensures proper water flow while keeping spa filters cleaner for longer periods Easy to install and remove without tools, making routine maintenance quick and hassle-free Designed to fit specific Sundance® and Jacuzzi® spa models; always verify compatibility before purchase Helps prolong the life of your filter cartridge and maintain optimal water quality

This OEM Sundance / Jacuzzi Temperature Sensor (#6600‑751) features a sturdy 12‑foot cable with a 3‑pin connector, allowing flexible placement for optimal water temperature monitoring. It includes a precision stainless steel bullet sensor housed in threaded plastic, designed to provide reliable temperature readings under diverse operating conditions in both hot and heated spa equipment. Compatible with a wide range of models—from 2015+ J‑500, J‑400, 2016+ J‑300, 2018+ J‑200/J‑100 Series, to popular Sundance 680/780/880/980 tubs—offering OEM performance across models. Comes pre-wired with a 3‑pin connector that snaps directly into the control pack—no splicing required—ensuring a simple install in under 10 minutes (O‑ring #6540‑228 sold separately). Backed by 150+ positive user reviews, this sensor solves common ‘temperature error’ codes and restores proper heater function, making it a highly rated, reliable replacement with consistent accuracy.

Gray stainless MOD screw (8 × 1-5/8) used in Sundance® spas for pillow and bracket mounting. OEM-grade hardware with discreet spa-shell matching finish. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

Mahogany stainless MOD screw (8 × 1-5/8) for Sundance® spa accessories. OEM part resists rust and blends seamlessly into warm-tone spa shells. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

Teak-tone stainless MOD screw (8 × 1-5/8) for Sundance® spa pillows and brackets. Rust-resistant and color-matched for discrete installation. OEM-certified for reliable performance and compatibility Simple installation with durable construction for extended use Helps maintain spa comfort, function, or filtration Designed specifically for compatibility with corresponding Sundance® or Jacuzzi® models

OEM extended-tip temperature sensor with a 3-pin connector and 2-wire design, used in modern Sundance®/Jacuzzi® spa control systems. Introduced February 9, 2022, as the replacement for recalled part #6600‑533. Precision-engineered to provide accurate water temperature readings for proper spa operation. Designed for use in 680, 780, 880, and 980 Series Sundance spas built after Feb 2022—as well as select J-200 to J-500 Jacuzzi models from April 2015+. Does not include O-ring (part #6540‑228) — O-ring must be purchased separately. Essential component for maintaining correct water temperature control and safe spa performance.

The Sundance®/Jacuzzi® 3/4″ Flow Switch (part # 2560‑040) is a critical OEM safety part: Designed for Sundance and Jacuzzi spa models from 2001–2016 Activates only when adequate flow is detected; prevents heater burn-out Includes 3/4″ slip Tee, switch, and attached 2‑pin cable (~18″ long) Compatible with Tecmark TFS303 (3040‑303) and Sundance 6560‑860 Used with 2-speed circulation systems or when replacing ozone-loop switches Easily mounts between heater and plumbing line

OEM flow switch assembly with transparent Tee housing (part #6560‑860) for spa circulation detection Includes 3/4″ barbed inlet/outlet and 3/8″ side barb for streamlined plumbing Replaces part #6560‑858 and integrates easily via box-end wiring harness Compatible with Sundance® 800/850/880 Series (1999+), Capri (2001+), J‑300 (2002+), and select models of 680/680 Hartford/Burlington as listed Helps trigger heater activation and prevent “Solid Flo” or “Flashing Flo” errors Durable plastic construction and ready-made wiring for easy DIY replacement