Includes three SmartChlor® cartridges designed for use with the FROG® @ease system in Bullfrog Spas Classic models Ideal for X-Series, R-Series, S/TIL, and pre-2023 A-Series Bullfrog hot tubs Self-regulating cartridges release chlorine only when needed, reducing chlorine use by up to 75% Each cartridge lasts approximately 3–4 weeks under normal usage and automatically flips when empty Helps maintain clear, odor-free water with consistent sanitizer levels and minimal effort Replacing the cartridge is quick and tool-free—simply snap in a new one and drop it into the spa Works in conjunction with the FROG® @ease Mineral Cartridge and compatible in-line holders EPA-registered SmartChlor® formula is gentler on skin, swimsuits, and spa surfaces

Designed specifically for Bullfrog® Spas Classic Series (2013–present), including A, R, X, and STIL models Includes one mineral cartridge, one SmartChlor® cartridge, one Jump Start shock packet, and 30 @ease test strips SmartChlor technology self-regulates chlorine levels, reducing usage by up to 75% compared to traditional systems Mineral cartridge lasts up to 4 months; SmartChlor cartridge lasts 3–4 weeks with normal spa use Maintains consistent chlorine levels (0.5–1 ppm) and delivers clean, clear water with minimal effort Compatible with Bullfrog @ease cartridge holder (sold separately) for a secure, snap-in fit Monthly shock treatment recommended; @ease test strips indicate when to replace cartridges Easy-to-use kit eliminates chemical guesswork—just insert and relax

Genuine OEM Bullfrog® Wellspring 282 filter cartridges, packaged as a 2‑pack for convenient replacements. Designed to fit Bullfrog® A‑Series, R‑Series, and X‑Series spas manufactured from 2018 to present. Can be retrofitted to 2013–2017 Bullfrog models using the Filter Cage Adapter #10‑00417. Coreless design eliminates the need for a plastic center core, reducing waste and increasing water flow efficiency. High-quality filtration media captures debris and particles down to approximately 20 microns, keeping spa water clean and clear. OEM filter ensures proper fit and performance, protecting spa pumps, heaters, and other internal components. Each pack contains two Wellspring 282 filters, ideal for replacing both primary and circulation filters at the same time.

Bullfrog’s Simplicity® Flat Filters (Part #10-00814) are designed to offer unmatched filtration performance and ease of maintenance for the M Series, Swim Series, and 2023–present A Series spas. These innovative flat-style filters eliminate the waste and inefficiency of cylindrical cartridges by using 100% of the filtration surface, delivering better water clarity with less effort. The plastic-free design is eco-conscious and easily rinsed clean, or simply replaced monthly for zero mess. Fits Bullfrog M Series, Swim Series, and A Series (2023–present) Flat, plastic-free design maximizes filtration area for better performance Improves efficiency and reduces filter waste over time Easy monthly maintenance – rinse clean or replace in seconds Genuine OEM filters (Part #10-00814) for a perfect fit and reliable function Package includes 4 flat filters Ideal for spa owners who want convenience, clarity, and cost control

Maintain your SnapCap’s sleek factory look with this Hidden SnapCap Clip (#60‑00085). Designed to fit under the A‑, R‑, and STIL Series’ SnapCaps (2016+), it allows for a clean secure hold while staying concealed. Durable ABS construction resists spa chemicals and UV, ensuring stable, long-lasting retention. OEM Hidden SnapCap clip for A, R, STIL spas (2016–present) Injection-molded plastic withstands spa environment Hidden location preserves aesthetics when installed Snap-fit install for quick, tool-free replacement Ideal for replacing broken or missing clips

Includes three SmartChlor® replacement cartridges for Bullfrog® Spas with Simplicity™ control systems (2019 and newer) Designed for in-line FROG® @ease Sanitizing Systems—no floating required Self-regulating SmartChlor® Technology maintains a consistent chlorine level automatically Each cartridge lasts 3–4 weeks depending on spa usage and size Works in tandem with the FROG® mineral cartridge for complete, low-maintenance sanitation Reduces chlorine use by up to 75%, leaving spa water softer and with less odor Snap-in design makes cartridge replacement quick, clean, and easy Keeps spa water clear and sanitized with minimal user effort

Designed exclusively for Bullfrog® Spas with the Simplicity™ control system (2019 and newer) Includes pre-filled SmartChlor® and mineral cartridges for low-maintenance water care Self-regulating chlorine delivery maintains a consistent sanitizing level with less monitoring No measuring or daily dosing—simply snap in cartridges and relax Up to 75% less chlorine use compared to traditional systems, with no fading, odors, or skin irritation Mineral cartridge lasts up to 4 months; SmartChlor® cartridge lasts 3–4 weeks Cartridges insert directly into the in-line housing built into the spa Leaves water silky smooth, with fewer chemicals and less effort

Genuine Bullfrog® Spas coreless filter cartridge 2-pack for STIL Series spas from 2018 to present Engineered for Bullfrog's Wellspring™ filtration system—no internal core means improved water flow and reduced maintenance Filters out fine debris, oils, and particulates to help keep spa water clean and clear Durable, pleated filtration media provides long-lasting performance and easy rinse-and-reuse functionality Designed to fit perfectly in STIL Series spas without modification or adapters OEM-quality filter ensures optimal spa performance and protection for pumps and heaters Each 2-pack provides a complete filter change for most STIL models Recommended replacement interval: every 3–6 months depending on spa usage and water quality

Keep your SnapCap & Headrest Assembly secure with this genuine SnapCap Clip (#60‑1260). Designed to snap into A‑, R‑, X‑Series spacer filter SnapCaps from 2013 to 2022, this durable component ensures locking retention and seamless function. Replacement-ready for worn or broken clips across multiple spa series. OEM SnapCap clip compatible with A‑, R‑, and STIL Series (2013–2022) Replacement part for X‑Series water filter SnapCaps (2016+) Ensures SnapCap assembly stays secure under normal use Injection-molded for durability under spa environment Simple press-fit replacement—no tools required

Designed for Bullfrog® Spas with the Simplicity™ control system (2019 and newer) that require XL capacity sanitation Includes one pre-filled SmartChlor® XL cartridge and one mineral cartridge for long-lasting water care XL SmartChlor® cartridge lasts up to 6 weeks—50% longer than standard cartridges Maintains crystal-clear water with self-regulating SmartChlor® Technology and no daily adjustments Works with the in-line cartridge holder built into the spa—no floating devices needed Provides complete 2-in-1 sanitation while reducing chlorine use by up to 75% Leaves water softer, with less odor and minimal skin or eye irritation Quick snap-in design makes cartridge replacement simple and mess-free

Update your Bullfrog® A‑Series JetPak modules (2020 onward) with this OEM regular headrest (#60‑01381) in sleek graphite. Featuring firm foam and spa-grade vinyl, it offers dependable neck support and fits seamlessly into 2020–present JetPaks. The two-pin snap-in attachment ensures a secure fit without tools. Built for durability, it resists spa chemicals and UV rays while maintaining spa-grade aesthetics and comfort. Tailored for regular JetPak modules in A‑Series spas (2020+) High-density foam core with spa-grade vinyl cover Two-pin snap-in design ensures stable placement Materials resist chemicals, heat, and UV exposure OEM-grade fit restores both function and look

Restore the comfort of your A‑Series spa's regular JetPaks (2016–2019) with this genuine Bullfrog® OEM headrest (#60‑00071). Made from high-density foam and covered in durable black vinyl, it delivers consistent neck support without sagging or fading. Its two-pin snap-in design ensures easy, precise, and tool-free installation. Built to endure spa chemicals and UV exposure, it offers reliable performance and restores a clean, factory finish to your spa. Designed exclusively for regular JetPaks on A‑Series spas (2016–2019) High-density foam cushion wrapped in spa-grade black vinyl Secure two-pin snap-in fitting prevents shifting during use Engineered for resistance to spa chemicals, heat, and UV rays OEM quality fit ensures restored comfort and aesthetics

OEM Bullfrog® filter core cage and cap assembly designed to retrofit 2013–2017 A, R, X, and STIL series spas for use with coreless filter cartridges (#10‑00416 or #10‑00810) Also serves as a replacement cage for 2018 and newer Bullfrog spas that already utilize coreless filters Includes both the durable cage and matching cap for a complete installation set Simplifies filter changes—coreless design eliminates traditional filter cores, improving maintenance and flow Constructed of robust plastic, built to withstand spa water and frequent cartridge swaps Tool-free installation: simply remove old assembly, insert new cage, snap on cap, and add coreless cartridge Supports clearer water, reduced clogging, and streamlined spa care Measures approximately 6.25" × 4.5" × 4.5" and weighs around 0.5 lb

Renew your Bullfrog® X‑Series spa seating comfort with this OEM headrest (#60‑1390), compatible with Gray JetPak modules from 2015 to 2022. Engineered with weather-resistant high-density foam and gray spa-grade vinyl, it offers plush neck support and durability. The two-pin snap-in mounting delivers a secure, tool-free fit. Ideal for replacing worn originals, this headrest restores both comfort and X‑Series aesthetics. Suited for X‑Series JetPak seating (2015–2022)  High-density foam core and gray vinyl cover Snap-in installation with two-pin secure fit Built to resist spa chemicals, heat, and UV exposure OEM match ensures proper fit and comfort restoration

Includes three extra-long SmartChlor® cartridges for Bullfrog® Spas with Simplicity™ control systems (2019+) Designed for in-line use with the FROG® @ease XL Sanitizing System—no floating system required XL cartridges provide extended sanitizing power, lasting up to 6 weeks each SmartChlor® Technology self-regulates to maintain consistent chlorine levels Reduces typical chlorine use by up to 75%, creating cleaner, softer water with less odor Works alongside the FROG® mineral cartridge to deliver full 2-in-1 water care Simple snap-in design for fast, no-mess replacements Ideal for spa owners who want longer intervals between cartridge changes

Refresh your R‑Series spa with this OEM regular headrest (#60‑00947), compatible with JetPak modules from 2013 to 2022. It features dense foam wrapped in dark gray vinyl, offering consistent neck support and resistance to spa wear. Crafted with a two-pin snap attachment, it installs securely without tools. Durable for spa environments, it resists chemicals and UV light, restoring both comfort and style to your spa's JetPak seating. Compatible with most R‑Series JetPaks (2013–2022) High-density foam core with dark gray spa-grade vinyl material Two-pin snap-in attachment for tool-free installation Handles spa chemicals, sunlight, and heat exposure OEM-grade restoration for spa comfort and appearance

Enhance your 2020–2022 Bullfrog® A‑Series with this OEM NeckMasseuse/Blaster headrest (#60‑01447), precisely designed for those JetPak modules. Built with high-density foam and a black vinyl cover, it provides targeted neck and shoulder comfort during therapeutic hydrotherapy sessions. The two-pin snap-in design ensures a secure, tool-free installation. Durable against spa chemicals and UV exposure, it restores your spa’s look and function to factory condition. OEM headrest designed for A‑Series NeckMasseuse & NeckBlaster JetPaks (2020–2022) High-density foam wrapped in spa-grade black vinyl for comfort and durability Two-pin snap-in design ensures secure, hassle-free installation Engineered to resist spa chemicals, heat, and UV degradation Restores proper support and aesthetics to your spa’s neck jet modules

Refresh the filter area of your Bullfrog® A‑Series spa (2016–2019) with this OEM Filter Lid Headrest (#60‑00037). Designed with high-density foam and a durable black vinyl cover, it snaps onto the filter housing for enhanced comfort and appearance. Specifically sized for the A‑Series filter lid, it offers neck and back support during spa sessions. Easy to install with a two-peg snap system, it provides a snug replacement for worn or faded originals. Genuine OEM headrest tailored for the filter lid on A‑Series spas (2016–2019) High-density foam wrapped in spa-grade black vinyl for durability Snap-in design with two rear pegs ensures secure, tool-free installation Provides ergonomic support and restores clean aesthetics to the spa filter area Made to resist chemicals, UV exposure, and everyday spa use

Genuine OEM Bullfrog® “Air Comfort” headrest designed for Bullfrog and Tadpole spas manufactured between 2002 and 2012 Features ergonomic, contoured support to cradle the neck and upper back for enhanced relaxation Durable black vinyl cover resists spa chemicals, UV rays, and daily wear for long-lasting use Snaps securely into place via two built-in clips, compatible with M-Series jet packs and similar models Compact size (approx. 10½"W × 2 7/8"H × ~3"D) fits seamlessly into spa seating, not obstructing jets Soft foam core provides plush comfort while maintaining shape over time Simple installation: align snaps with receptacles and press until secured—no tools needed Perfect replacement for worn-out or faded pillows, restoring comfort and spa aesthetics

Enhance your spa filtration area with this OEM Filter Pillow (#60‑02022) for Bullfrog® A‑Series spas (2020–2022). A thick granite-colored foam pillow that cushions filter lids, reduces rattling, and prevents water splashes. Designed for sandwiched installation, it improves seal efficiency and protects filter housing. OEM part for A‑Series filter lid covering (2020–2022) Granite high-density foam reduces vibration and noise Easy-to-fit design sits within the filter lid housing Durably resists water exposure, chemicals, and UV Helps maintain cleaner spa water by preventing lid movement

Upgrade your Bullfrog spa’s water care with this official FROG™ @ease cartridge holder (part #10‑01006), designed to fit all Bullfrog Spas (2013+ models) with dual filter systems. Engineered to hold both the SmartChlor® and mineral cartridges securely, it converts your spa into a self-regulating sanitizing system that reduces chlorine usage by up to 75%. Easy install—just snap into place between filters. Compatible with FROG test strips, this holder streamlines water care, ensuring crystal-clear, softer water with minimal maintenance. Official FROG™ @ease holder designed for 2013–present Bullfrog spas  Quickly installs between dual filter cartridges—no tools required Works with both mineral and SmartChlor® cartridges for balanced sanitization  Helps maintain consistent low-level chlorine using SmartChlor self-regulating technology Durable ABS construction resists spa chemicals and heat for long-term use

The Bullfrog Spas Filter Cartridge with Microban® (Part #10-2870) is a factory-original replacement designed for optimal performance in A Series, R Series, and X Series spas built from 2013 to 2016. This high-quality filter features Microban® antimicrobial technology, which helps inhibit the growth of bacteria and mold on the filter media—extending the life of your filter and improving your water quality. If you're considering a coreless upgrade, this filter can be replaced with compatible coreless cartridges using an optional Filter Cage Core (#10-00417). Fits Bullfrog A Series, R Series, and X Series spas (2013–2016) Genuine OEM filter (Part #10-2870) ensures perfect fit and filtration performance Features Microban® antimicrobial technology to resist bacteria and extend filter life Pleated filtration media traps fine particles and debris efficiently Improves water clarity, hygiene, and overall system performance Easy to install and replace as part of routine spa maintenance Can be replaced with coreless filter #10-00416 or #10-00810 (requires filter cage core #10-00417) Choose this Bullfrog filter to keep your spa water cleaner, clearer, and safer—session after session.

Ideal for refreshing your 2016–2019 Bullfrog® A‑Series spa, this OEM NeckMasseuse/Blaster headrest (#60‑00072) offers ergonomic neck support in high-density foam with a black vinyl cover. Designed exclusively for those JetPak modules, it replaces worn or discolored originals with ease. The two-pin snap-in design ensures secure, tool-free installation. Crafted to withstand spa chemicals and UV exposure, it's perfect for renewing your spa's look and feel. Compatible with A‑Series NeckMasseuse & NeckBlaster JetPaks (2016–2019) High-density foam core with spa-grade vinyl covering Two-peg snap-in design for secure, easy installation Built to resist spa chemicals, UV light, and heat OEM quality ensures exact fit and reliable performance

Give your X‑Series spa a comfort boost with this OEM Neck Jet headrest (#60‑00777), made for Bullfrog® X‑Series spas with neck jets from 2018 to 2021. Crafted from high-density foam wrapped in spa-grade gray vinyl, it delivers tailored neck support for soothing hydrotherapy experiences. The two-pin snap-in design allows easy installation without tools, ensuring a secure factory-level fit. Built to resist spa chemicals and UV exposure, this headrest restores both comfort and your spa’s aesthetic. Designed specifically for X‑Series spas featuring neck jets (2018–2021) High-density foam core with gray spa-grade vinyl cover Two-pin snap-in system for secure, tool-free installation Durable vinyl resists spa chemicals, heat, and UV exposure OEM quality ensures full compatibility and long-term comfort