Shop
-
6541-853J | ProClassic™ J-200™ Filter (2023+)
- Performance and fit qualified to Jacuzzi factory standards
- Genuine replacement filter for Jacuzzi 2023+ J-200 Models; J-285, J-275, J-245, J-235, J-225 and J-215
- Rinseable filter can be used for up to 18 months (sold separately)
- Use with 2-in-1 Frog @Ease SmartChlor & Mineral Cartridge Holder & exclusive Jacuzzi cartridges (purchased separately)
- Use of non Jacuzzi branded parts can adversely affect the quality of your spa experience. Damage to the hot tub due to unauthorized parts and accessories may void the warranty
$69.95 -
SilkBalance Shock Gems
- Non-chlorine MPS shock (single-dose)
- Eliminates odors and reduces organic contaminants
- Organic contaminant examples: boil oil, suntan lotion, etc.
- SilkBalance destroys contaminants thru oxidization
- 1 Shock Gem after spa use (2 people) or 2 Shock Gems after spa use (3+ people)
$59.99 -
SilkBalance Clean Start – Plumbing Line Cleaner
- Fast, powerful, safe, and low foam results in 30 minutes or less
- Purges the plumbing system and hot tub accessories
- Eliminates slime and sludge in jets and plumbing lines
- Proprietary formula detoxes your spa but safe to use immediately after
- 1 botte / 1 dose
$24.99 -
SilkBalance Gems Water Care (4 month supply)
- Same great formula in a dissoluble gem form
- Gems dissolve in 20 seconds (when placed in a filter compartment or water stream
- Treatment: 1 Gem a Week (results may vary)
- Results: Silky Soft Skin, pH and Alkalinity balanced, no odors
$179.99 -
60-03033 | Neck Headrest (A Series™ Plus & Select)
- Neck Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
Trim package compatibility
-
2023 A Series™ Standard- 2023 A Series™ Plus
- 2023 A Series™ Select
$74.89 -
60-02218 | Main Headrest (A Series™ Plus & Select) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$75.87 -
6472-839 | Sundance Wrap Around Gray Pillow 1998+
- Wrap around pillow for Sundance Spas 1998-2000
- Includes 3 suction cups
- Formerly OEM part #6455-447
$76.95 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
SpaGuard Brominating Concentrate (6 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$77.99 -
SpaGuard Brominating Concentrate (2 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$27.99 -
Hot Tub Things 281 Microban® Filter 2-pack (Compatible 10-00281, Wellspring 18 Coreless, Pleatco PBF17 PBF17-M)
- Newest filter addition to our Hot Tub Things family!
- Comparable to the Wellspring 281 filter for Bullfrog Spas®
- 2 Premium high-quality filter cartridges | Easy to Clean Microban Pleats | Powerful & Efficient Performance
- Includes two 281 filters per package
- STIL Series Spas 2018 – Present
- STIL Series Spas from | 2015-2017 | you will need to purchase a Filter Cage Core Assembly (part #10-00417)
- Compatible to Wellspring 281, Wellspring 18 Coreless, Pleatco PBF17, PBF17-M
$72.95 -
6473-446 | Sundance® 680™ Series Pillow 2023+
- Sundance 680 Series Replacement Pillow 2023+
- OEM #6473-446 (6455-038)
- For compatibility, see production description below.
- Warranty: Covered up to the day of delivery or installation
$59.50 -
6541-468S | Sundance® 680™ Pleated Filter
- Pleated filter with large surface area captures more debris
- Lasts up to 12 months
- Pleatco & Sundance OEM 6473-468S
- Can substitute 6473-249S & 6473-283S
- Can substitute 6541-460S
$79.50 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6472-682 | Sundance® Spas 880 Series Drink Tray 2009+
- Sundance Spas drink tray used on spas manufactured 2009+
- Installation on top of the filter lid
- OEM part #6472-682
$42.50 -
6472-540 | Sundance® Spas 850 Series Drink Tray 2000-2008
- Sundance Spas drink tray used on spas manufactured from 2000-2008
- Installation on top of the filter lid
- OEM part #6472-540
$48.00 -
6473-249S | Sundance® 680™ Microclean Mini Filter Outer
- Microclean Mini Filter (OUTER ONLY)
- Outer pleated filter removes large debris
- Lasts up to 12 months
- Use with only Sundance Microclean Mini Inner Filter
$84.50 -
6473-283S | Sundance® 680™ Microclean Mini Filter Inner
- Microclean Mini Filter (INNER ONLY)
- Two stage filtration | Inner spun-bound microfiber filters the smallest particles
- Inner spun-bound microfiber filters the smallest particles
- Lasts for up to 4 months
- Use with only Sundance Microclean Mini Outer Filter
$46.50 -
100029 | CMIII Left Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the right side support arm
- OEM part #100029
$60.00 -
100028 | CMIII Right Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the left side support arm
- OEM part #100028
$60.00 -
100561 | Covermate I Sundance Right Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the right side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100562
$75.00 -
100561 | Covermate I Sundance Left Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the left side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100561
$75.00 -
100269 | Covermate I Sundance Bracket Kit
- Designed for the Leisure Concepts – Covermate I Sundance version
- Arm is interchangeable as the left or right side
- OEM part #100269
- Comes with left & right bracket, screw kit, 1 towelmate
$125.00 -
6455-465 | Sundance® Spas Wrap Around Pillow Without Insert
- Sundance® Spas Wrap Around Pillow
- Compatible with 2001-2008 spa model
- Does not come with the insert pillow (part #6455-472)
- Does not come with the mounting screws (part #6570-231)
$59.95 -
SmartStep Jr (Black)
- Manufactured by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Includes a single SmartDrawer
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$99.00 -
SmartStep (Coastal Grey)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Black)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Portabello)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
CoverShelf
- Shelf arms fold flat against spa when not in use
- Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting bracket
- Works well on most unconventional shaped spas
- Lifter system sales are final sale
$199.00 -
CoverMate Freestyle
- The cover lift solution for round and uniquely shaped spas
- Adjustable mounting base that slides beneath the spa
- Requires approximately 20 inches of clearance behind the spa
- Positions cover away from the spa allowing full use
- Lifter system sales are final sale
$299.00 -
CoverMate III
- Ergonomically designed for ease of use
- Locking shock prevents unintentional closure
- Made in the USA
- Not compatible with round spa
- Lifter system sales are final sale
$399.00 -
CoverMate II
- Allow the open cover to rest in a lower position for a slightly less-obstructed view.
- Mounting system: screw-mounted low on the spa
- Made in the USA
- Not compatible with round spas
- Lifter system sales are final sale
$199.00$299.00 -
CoverMate I
- Step up your cover lift with the CoverMate I – Sundance Spas.
- Highest quality and most sold cover lift on the market.
- Sundance version with aluminum mounting brackets
- Lifter system sales are final sale
$299.00 -
6540-213 | Large Spa Filter Drain Cover
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
High Duty Wind Straps (Set of 2)
- Additional security to hold down your spa cover
- Adjustable length: 92″ to 136″ (230cm to 345cm) and 1.5″ (3.8cm) wide
- Fits spas from 6ft to 9ft (1.8m to 2.7m)
- Stainless screws included and plastic buckles (pinch) included | locking keys
$27.75 -
100150 | Safe-T Rail Foam Grip
- Compatible with Leisure Concepts Products
- Comes as a set of 1
- OEM #100150
- Length = 19.5 inches
$25.00 -
Hydropool Filter 4520007 (Pleatco #PRC50)
Description: 50sqft Dual Core Filter w Removable Core
Hydropool part #4520007
Pleatco part #PRC50
Hydropool model compatability: 12FX AquaPlay
$63.50 -
100004 | Covermate I | Left or Right Pivot Arm
- Designed for the Leisure Concepts – Covermate I system
- Arm is interchangeable as the left or right side
- OEM part #100004
$48.95 -
6570-398 | Jacuzzi® Mesh Skimmer Debri Bag w/11 Clip Holes
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
6455-007 | jacuzzi® J-300 Collection (2002-2006)
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
SpaGuard Spa Sentry® (32 oz)
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$25.99 -
373045J | Jacuzzi J-200 50 Sq/Ft Filter
- GENUINE JACUZZI HOT TUB PARTS | Manufactured by Jacuzzi
- GUARANTEED COMPATIBLE | compatible with Sundance Spas that use filter 373045S
- CLEAN, CLEAR PERFORMANCE
- Height: 9”, Diameter: 6” 45 square feet of filtration material
$49.50 -
SpaGuard Enhanced Shock (6 lb)
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$52.99 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
100504 | Covermate III Plastic – Right Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the rightside mounting bracket
- OEM part #100504
$75.00 -
100503 | Covermate III Plastic – Left Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the left side mounting bracket
- OEM part #100503Covermate III Plastic Installation Instructions
$75.00