Shop
Want to keep your stuff looking newer, longer? When UV protection and surface finish matter to you, 303 Products has the solution.
-
100028 | CMIII Right Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the left side support arm
- OEM part #100028
$60.00 -
100561 | Covermate I Sundance Right Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the right side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100562
$75.00 -
100561 | Covermate I Sundance Left Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the left side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100561
$75.00 -
100269 | Covermate I Sundance Bracket Kit
- Designed for the Leisure Concepts – Covermate I Sundance version
- Arm is interchangeable as the left or right side
- OEM part #100269
- Comes with left & right bracket, screw kit, 1 towelmate
$125.00 -
SmartStep Jr (Black)
- Manufactured by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Includes a single SmartDrawer
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$99.00 -
SmartStep (Coastal Grey)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Black)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Portabello)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
FROG® Jump Start® (12/pack)
- Accompanies the FROG Serene and Frog @ease Sanitizing Systems or Frog Serene and Frog @ease In-Line Systems
- Helps the chlorine dissolve faster
- Use FROG Jump Start after balancing the water
- Use before using your FROG Sanitizing System
- One packet works in spas up to 500 gallons
$61.75 -
FROG® Filter Mate® Mineral Sanitizer
- No assembly, easy installation – one prefilled stick easily fits into the filter, where it works for 4 months
- Filter Mate contains FROG Sanitizing Minerals, which work together with chlorine or bromine to kill bacteria 2 ways, giving you more peace of mind
- FROG Sanitizing Minerals lower chlorine or bromine use up to 50%* and help keep the water clean and crystal clear
- Turns ordinary hot tub water into Fresh Mineral Water, its Cleaner, Clearer, Softer and Easier to take care of.
$35.75 -
CoverShelf
- Shelf arms fold flat against spa when not in use
- Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting bracket
- Works well on most unconventional shaped spas
- Lifter system sales are final sale
$199.00 -
CoverMate Freestyle
- The cover lift solution for round and uniquely shaped spas
- Adjustable mounting base that slides beneath the spa
- Requires approximately 20 inches of clearance behind the spa
- Positions cover away from the spa allowing full use
- Lifter system sales are final sale
$299.00 -
CoverMate III
- Ergonomically designed for ease of use
- Locking shock prevents unintentional closure
- Made in the USA
- Not compatible with round spa
- Lifter system sales are final sale
$399.00 -
CoverMate II
- Allow the open cover to rest in a lower position for a slightly less-obstructed view.
- Mounting system: screw-mounted low on the spa
- Made in the USA
- Not compatible with round spas
- Lifter system sales are final sale
$199.00$299.00 -
CoverMate I
- Step up your cover lift with the CoverMate I – Sundance Spas.
- Highest quality and most sold cover lift on the market.
- Sundance version with aluminum mounting brackets
- Lifter system sales are final sale
$299.00 -
6540-213 | Large Spa Filter Drain Cover
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
100150 | Safe-T Rail Foam Grip
- Compatible with Leisure Concepts Products
- Comes as a set of 1
- OEM #100150
- Length = 19.5 inches
$25.00 -
100004 | Covermate I | Left or Right Pivot Arm
- Designed for the Leisure Concepts – Covermate I system
- Arm is interchangeable as the left or right side
- OEM part #100004
$48.95 -
FROG® Test Strips (for Swimming Pools & Spas)
- Manufactured by King Technology
- Size: 50 test strips
- Measures Chlorine / Bromine levels, pH and Hardness
- Can be used with any Fresh Mineral Water products from FROG®
- Can be used with other non-FROG® sanitizing system
$13.50 -
6570-398 | Jacuzzi® Mesh Skimmer Debri Bag w/11 Clip Holes
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
6455-007 | jacuzzi® J-300 Collection (2002-2006)
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
SpaGuard Spa Sentry® (32 oz)
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$25.99 -
373045J | Jacuzzi J-200 50 Sq/Ft Filter
- GENUINE JACUZZI HOT TUB PARTS | Manufactured by Jacuzzi
- GUARANTEED COMPATIBLE | compatible with Sundance Spas that use filter 373045S
- CLEAN, CLEAR PERFORMANCE
- Height: 9”, Diameter: 6” 45 square feet of filtration material
$49.50 -
SpaGuard Enhanced Shock (6 lb)
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$52.99 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
100504 | Covermate III Plastic – Right Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the rightside mounting bracket
- OEM part #100504
$75.00 -
100503 | Covermate III Plastic – Left Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the left side mounting bracket
- OEM part #100503Covermate III Plastic Installation Instructions
$75.00 -
101510 | Compression Damped Non-locking Shock 75#
- Replacement compression damped non-locking shock – lift. 75 lb.
- OEM #101510from Leisure Concepts
- Replaces old part #100245
- To see if your lifter is compatible, visit https://leisureconcepts.com/installation-instructions/
$36.75 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
DuraStep II (Portobello)
- Large, slip-resistant tread for safety
- Tested up to 700 lbs
- Locks together in seconds
- Strong, stable and attractive
- Unique patented reversible tread design can accommodate round or square spas
$109.00$169.00 -
100002 | CoverMate Foam Grip
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Comes as a set of 1 (1 foam grip)
- OEM #100002
$15.00 -
100008 | CoverMate Towelmate
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Does not include mounting screws
- OEM #100008
$18.00 -
101632 | Compression Damped Locking Shock 75#
- Replacement locking shock/strut for CoverMate 3 spa cover lift. 75 lb.
- Features red button type locking mechanism.
- OEM #101632 from Leisure Concepts
$49.95 -
6455-468 | Jacuzzi® J-200 Series Snap-In Pillow
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
FROG® Serene Bromine Cartridge (150g)
Bromine cartridges last between 2-4 weeks depending on volume of water, number of bathers and usage.
- Spa frog bromine cartridge
- Refill for use in either the spa frog floating system, or for users of the spa frog inline system
- Use with companion frog mineral cartridge
$14.75 -
2472-136 | Jacuzzi J300™ HYDROSOOTHE™ Massage Pillow
- Jacuzzi J-300 Hydrosoothe Massage Pillow Complete Assembluy
- Jacuzzi J300 manufactured in 2020
- Hydrosoothe installation
- Contains pillow and following items:
- A. 6541-336, Inner Ring: Pillow, Massage, J-300 2020
- B. 6541-361, Outer Ring: Pillow, Massage, J-300 2020
- C. 6541-403, Bushing: Pillow, J-300 2020 (2 Req)
- D. 6540-547, Nut: .5-13 Nylon Wing (2 Req)
$53.50 -
SpaGuard Stain & Scale Control (32 oz)
- SpaGuard Spa Stain & Scale Control – 1 Quart
- Prevents scale formation and cloudy water due to high calcium levels
- Removes some scale buildup on spa surface
- Removes relatively fresh metal stains from spa surfaces
- Simply add this powerful liquid formula weekly to safeguard your spa or hot tub from these threats. Color of the liquid is natural brown
$27.99 -
FROG Maintain™, Non-chlorine Shock Treatment, 12 Pack
- Single-use packet means no measuring, no worry
- Formulated specifically for Frog brand sanitizers
- Chlorine free shock is safe to use with chlorine, bromine, and minerals
- Shock each time you switch the SmartChlor or Serene bromine cartridge
$59.95 -
6570-231 | Sundance® / Jacuzzi® Pillow Attachment Screw
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
$2.99 -
2560-040 | Sundance® & Jacuzzi® flow switch 3/4″ and 3/8″ barbed ports
- Sundance, Sweetwater, Jacuzzi Spas Flow Switch
- part #2560-040
- Transparent Tee 3/4 inch barb with s 3/8 inch barb off the side
- Flow Switch now comes molded with a 3/32 inch hole opening
- Do not use on other models such as 800,850, 800 Series that use a square finger connection.
- see spa model compatibility below
$45.99 -
2540-387J | Jacuzzi Proclear II Filter
- GENUINE JACUZZI QUALITY | This filter is made by Jacuzzi, the same company that made your hot tub
- GUARANTEED COMPATIBILITY | Works with 2006–2012 J-465, J-470, and J-480 hot tubs. See description for more details
- SPECIALIZED FILTRATION | Designed by Jacuzzi specifically for J-400 series hot tub
$44.50 -
2540-381J | Jacuzzi® J-200™ 95 sq. ft. Filter
- GENUINE | Enjoy the peace of mind that comes from Jacuzzi quality water filters
- EFFECTIVE | Woven filtration protects your water, your family, and your equipment from harmful dirt and particles
- DURABLE | The 2540-381J filter can withstand repeated washing and rinsing with an approved cartridge cleaner (sold separately), so you can get maximum life out of your purchase
- ECONOMICAL | Replace the filter regularly to protect the pumps and plumbing of your hot tub
$68.50 -
SpaGuard Calcium Increaser (12 oz)
- Prevents corrosion of equipment
- Prevents degradation of spa surfaces
- 1 tbsp. per 100 gallons increases calcium hardness ~25 ppm
$7.99 -
6472-859 | Jacuzzi® & Sundance® ClearRay Quartz Tube
- GENUINE CLEARRAY | This genuine ClearRAY tube is made by Sundance Spas, part # 6472-859
- GUARANTEED COMPATIBLE | Tube fits CLEARRAY XL bulbs in both Sundance Spas and Jacuzzi-brand hot tubs
- CRYSTAL CLEAR | The pure mineral quartz of this tube provides optimal light pass-through so you get maximum UV sanitation efficiency
- INSTALLATION KIT | Comes with latex glove (fingerprints can shorten system life) and complete instructions
- As of Summer 2019, an O-ring is not included with the replacement tube.
$35.99 -
2472-831 | Jacuzzi® J215/J225™ Pillow
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-007 | Jacuzzi J-400 pillow (J445/J435/J475/J485)
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
- Compatible with all current J400 models and J-445 & J-435 10/2017+, J-485 & J-475 2019+, All J-400 2020+
$42.50 -
2455-104 | Jacuzzi J-300 Pillow (insert only)
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50