Shop
-
SpaGuard® Rapid-Dissolve Shock Oxidizing Tabs (1.25 lb)
- Non-chlorine shock-oxidizer
- Quickly oxidizes non-living waste and contaminants**
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spas for 12+ weeks
$23.99 -
SilkBalance Gems Water Care (4 month supply)
- Same great formula in a dissoluble gem form
- Gems dissolve in 20 seconds (when placed in a filter compartment or water stream
- Treatment: 1 Gem a Week (results may vary)
- Results: Silky Soft Skin, pH and Alkalinity balanced, no odors
$179.99 -
6472-682 | Sundance® Spas 880 Series Drink Tray 2009+
- Sundance Spas drink tray used on spas manufactured 2009+
- Installation on top of the filter lid
- OEM part #6472-682
$42.50 -
6472-974 | Sundance Pillow for Sweetwater Spas
- OEM ball and socket Sundance Sweetwater pillow
- Sundance Sweetwater Spas replacement pillow
- Replaces 6455-451
$35.50 -
2540-380 | 25 Sq. Ft. Filter Cartridge
- Genuine Jacuzzi Part, guaranteed quality and compatibility
- Compatible with JWB and Echo spas, 2001 and older hot tubs
- 25 square feet of filtration material for clean, clear water
$40.99$59.50 -
6473-158J | Jacuzzi Proclarity Depth Load Filter
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-161 for 2012 models of J-480, J-470, and J-465
$57.50 -
SpaGuard® Rapid-Dissolve Stain & Scale Tabs (1.25 lb)
- Controls metal-based staining & scaling
- Protects spa and swim spa equipment and surfaces
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spa for 12+ weeks
$28.99 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
6473-249S | Sundance® 680™ Microclean Mini Filter Outer
- Microclean Mini Filter (OUTER ONLY)
- Outer pleated filter removes large debris
- Lasts up to 12 months
- Use with only Sundance Microclean Mini Inner Filter
$84.50 -
6455-465 | Sundance® Spas Wrap Around Pillow Without Insert
- Sundance® Spas Wrap Around Pillow
- Compatible with 2001-2008 spa model
- Does not come with the insert pillow (part #6455-472)
- Does not come with the mounting screws (part #6570-231)
$59.95 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
FROG @ease XL for Bullfrog Spas®, Simplicity Filter System
- Compatible with Bullfrog Spas 2024+
- Ideal for M Series™ & A Series™ in 8 & 9 sizes
- Includes: (1) Mineral (blue cartridge), (1) SmartChlor (silver cartridge), (1) FROG @ease Test Strips, (1) FROG Jump Start packet
- Kills bacteria 2 ways with minerals & Chlorine
- up to 75% less chlorine*
- shock only once a month
- No touching or measuring chlorine
$74.95 -
SpaGuard® Rapid-Dissolve pH Decreaser Tabs (1.25 lb)
- Quickly decrease pH level of spa water
- Provide soaker comfort and protect spa and swim spa equipment
- 2 tabs per 250 gallons – 1000 liters as needed
- Lowers pH 0.1 – 0.2 units
$12.99 -
SilkBalance Shock Gems
- Non-chlorine MPS shock (single-dose)
- Eliminates odors and reduces organic contaminants
- Organic contaminant examples: boil oil, suntan lotion, etc.
- SilkBalance destroys contaminants thru oxidization
- 1 Shock Gem after spa use (2 people) or 2 Shock Gems after spa use (3+ people)
$59.99 -
6472-540 | Sundance® Spas 850 Series Drink Tray 2000-2008
- Sundance Spas drink tray used on spas manufactured from 2000-2008
- Installation on top of the filter lid
- OEM part #6472-540
$48.00 -
6455-423 | Sundance Spa® Wrap Pillow w/ Suction Cups
- Wrap Around Pillow for 1986-1997 SUNDANCE® Spas
- “suction cup” style pillow which replaced older “ball and socket” style pillows
- OEM Sundance part #6455-423
$77.75 -
6541-964S | MicroClean® 880™ Series Complete Filter Assembly (2024+)
- Complete Filter Assembly, which includes 6473-452S & 6473-453S
- New 2024 Filter Sundance 880™ Series 2024+ | 880™ Series | Filter: Microcln Ult 2pc
- Fibrous inner core filters the smallest particles – lasts up to 6 months
- Outer pleated filter removes large debris – lasts up to 18 months
- Use with SPAPURITY™ Mineral Sanitizer
$89.95 -
6541-965S | Sundance Spas MicroClean® III 130FT² Pleated Filter (2024+)
- Sundance Spas MicroClean® III 130FT² Pleated Filter (6541-965S) – Single pleated filter
- New 2024 Filter Sundance 880™ Series 2024+
$99.95 -
6473-452S | MicroClean® 880™ Series Outer Filter (2024+)
- New 2024 Filter Sundance 880™ Series 2024+
- Use only with Sundance branded filter: 6473-452S (sold separately)
- Use with SPAPURITY Mineral Sanitizer
$60.50 -
6473-453S | MicroClean® 880™ Series Inner Filter (2024+)
- New 2024 Filter Sundance 880™ Series 2024+
- Use only with Sundance branded filter: 6473-452S (sold separately)
- Use with SPAPURITY Mineral Sanitizer
$38.95 -
FROG @ease XL for Bullfrog Spas®, Simplicity SmartChlor Cartridge 3-pack
- Use only with Frog @ease mineral cartridge in FROG @ease sanitizing system
- includes: (3) Smartchlor (silver) cartridges
- Up to 75% less chlorine*
- Lasts 3-4 weeks for an average 400 Gallon Tub
- Smart, easy, and recyclable
$84.95 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
303® Aerospace Protectant (1 gal)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$64.95 -
SpaGuard® Rapid-Dissolve Chlorinating Tabs (1.25 lb)
- Quick-dissolving sanitizer and oxidizer
- Single-dose, 1” tab per 300/600 gallons – 1200-2700 liters weekly
- Administers 3-5ppm of free chlorine
$34.99 -
SpaGuard® Rapid-Dissolve Alkalinity Increaser Tabs (1.25 lb)
- Control pH bounce by quickly raising total alkalinity
- Helps protect equipment from corrosion
- 2 tabs per 250 gallons – 1000 liters as needed
- Raises total alkalinity by 30 ppm
$15.99 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
2472-014 | J300™ HYDROSOOTHE™ Massage Pillow (Front-Removable)
- Pillow: Massage, Front-removable, J-300 2020+
- OEM p/n 2472-014
- Pillow assembly consists of foam pillow (6455-036), inner ring (6541-427) inserted into pillow, and outer ring (6541-428) attached to back of inner ring.
- CAUTION: The original HYDROSOOTHE™ pillows were NOT able to be removed from the front of the spa. You will need to access the nuts at the back of the spa shell BEFORE pulling the pillow from the front of the shell.
- Installation Instructions
$72.95 -
60-01797 | Standard Pillow (SWIM SERIES™) 2022+
- Function design for the new SWIM SERIES™
- Used on S150 & S200 2022+
- Premium Headrest Design
$35.18 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
60-03603 | Neck Headrest (A Series™ Standard) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$77.85 -
60-02839 | Main Headrest (A Series™ Standard) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$46.27 -
60-03033 | Neck Headrest (A Series™ Plus & Select)
- Neck Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
Trim package compatibility
-
2023 A Series™ Standard- 2023 A Series™ Plus
- 2023 A Series™ Select
$74.89 -
60-02218 | Main Headrest (A Series™ Plus & Select) 2023+
- Headrest for the all-new 2023 A Series™ line
- Provides better alignment for the neck and spine
- Improved fit and look (blending with natural contour of the spa)
- Premium Headrest Design
$75.87 -
6472-839 | Sundance Wrap Around Gray Pillow 1998+
- Wrap around pillow for Sundance Spas 1998-2000
- Includes 3 suction cups
- Formerly OEM part #6455-447
$76.95 -
6473-446 | Sundance® 680™ Series Pillow 2023+
- Sundance 680 Series Replacement Pillow 2023+
- OEM #6473-446 (6455-038)
- For compatibility, see production description below.
- Warranty: Covered up to the day of delivery or installation
$59.50 -
6472-766 | Sundance 980 Series 2019+
- Pillow: 2019+ 980 Series (Lisbon only)
- Replaced 6455-024
$38.99 -
6472-765 | Sundance Select Series 2011-2018 Pillow
- Select Series 2018
- Replaced part #6455-008
$33.50 -
6472-702 | Sundance Cushion Filter Lid
- Aftermarket Seat Pillow converts lid into functional seat
- only works with OEM Acrylic lid for 2018 & 2019 Marin/Cambria
- Fits Into Integrated Beverage Concierge
$81.25 -
2540-384J | Jacuzzi® ProClear II Filter Cartridge
- GENUINE JACUZZI | Filter is made by the same company that made your hot tub, so you know it will work perfectly
- 25 SqFt AREA | The tight pleating exposes maximum surface area so the filter can hold more debris
- FOR J-400 HOT TUBS | This is a Jet Pump filter for J-460 and J-465 hot tubs only
$42.50 -
60-01335-01 | Bullfrog Headrest, M Series (2020-present)
- Bullfrog replacement headrest for M-Series JetPak
- Color – Cool Grey.
- Bullfrog Part # 60-01335-01
- Fits Bullfrog M-Series tubs 2020–onward
$38.50