Shop
-
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Jacuzzi J-300 Hydrosoothe Pillow Assembly
- Jacuzzi J300 manufactured in 2020
- Pillow comes with the back fitting
- Part #2472-136
- Hydrosoothe installation
$53.50 -
Jacuzzi J-200 Pillow 2472-828
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Compatible – Fits All J-280 and J-270 hot tubs. See description for additional tubs
-
Soft and Comfortable – Restore your spa to its original look and comfort
-
No hardware required – Single plastic bolt in the back secures it to the existing mount in your tub
$32.50 -
-
Jacuzzi J-215/J-225 Pillow 2472-831
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
- Hydrosoothe installation
$40.50 -
Jacuzzi J-400 Pillow 2472-007
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
$42.50 -
Jacuzzi J-400 Pillow 2472-820
- Genuine Jacuzzi brand part
- Perfect match for your J-400 series hot tub
- Clear window for headrest lighting
The mounting hardware is not included. Contact your licensed Jacuzzi repair technician if you require new plastic mounting hardware.
$43.50 -
Jacuzzi J-400 Pillow 2472-822
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
Jacuzzi J-400 Series Pillow Slider 2570-401
- Jacuzzi® J-400 Series pillow slider level model 2570-401.
- This J400 slider level is used with J-400 series pillows.
- These fit J-400 Collection Pillows part # 2472-820 or part # 2472-822.
$14.25 -
Jacuzzi J-500 Pillow 2472-005
- Fits 2015+ JACUZZI®® models J-585 & J-575
- Replaces old part #2455-266
- 4 Total pillows on spa
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$40.50 -
Jacuzzi J-LX®/J-LXL® Filter Cartridge 6540-164J
- Jacuzzi filter with removeable cap (6541-384) that you can use with the 2890-185 Mineral Purifier.
- 6540-164 J-LX®/J-LXL® Series Filter Cartridge with Cap – 75 sq. ft.
- Jets Pump 1 Cartridge for 2012+ Jacuzzi® J-495, J-425, and J-415 models.
- Replaces filter part #2000-286
$55.50 -
Jacuzzi J-LX/J-LXL Pillow 6455-485
- Jacuzzi J-LX/J-LXL Pillow Replacement
- 2011+
- Snap-in
$34.50 -
Jacuzzi Pillow (back mount) 2455-105
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
Jacuzzi Pillow (insert only) 2455-104
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
Jacuzzi Pillow (with Insert) 2472-826
- Genuine Jacuzzi brand part
- Perfect match for your older J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 2455-104 insert
$42.50 -
Jacuzzi Pillow with Insert 2472-824
- Genuine Jacuzzi brand part
- Perfect match for your J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 6455-488 insert
$42.50 -
Jacuzzi Pre-2002 Filter 2540-380
- Genuine Jacuzzi Part, guaranteed quality and compatibility
- Compatible with JWB and Echo spas, 2001 and older hot tubs
- 25 square feet of filtration material for clean, clear water
$40.99$59.50 -
Jacuzzi Proclarity Depth Load Filter 6473-158
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-161 for 2012 models of J-480, J-470, and J-465
$57.50 -
Jacuzzi Proclarity Depth Load Filter 6473-161
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-157 (All 2013+ models of J-400 series Jacuzzi hot tubs)
- Use with Jacuzzi Filter 6473-158 for 2012 models of J-480, J-470, and J-465
$34.95 -
6473-157J | Jacuzzi J-400 ProClarity Filter (2012+)
- ECONOMICAL | Each ProClear filter cartridge lasts up to 18 months, keeping your hot tub clean and relaxing
- GENUINE JACUZZI | These Jacuzzi 6473-157 Filters bear the Jacuzzi name and seal of quality
- OEM part #6473-157J
$54.95 -
Jacuzzi J-460 Filter 2540-384
- GENUINE JACUZZI | Filter is made by the same company that made your hot tub, so you know it will work perfectly
- 25 SqFt AREA | The tight pleating exposes maximum surface area so the filter can hold more debris
- FOR J-400 HOT TUBS | This is a Jet Pump filter for J-460 and J-465 hot tubs only
$42.50 -
Jacuzzi Proclear Filter 6000-383 (2-pack)
- This 2-pack will make it easier to switch out both filters at the same time!
- Diameter: 6 3/4″ Length: 15 1/2″ Bottom: 2″ SAE thread
- Genuine Jacuzzi Parts
- Twist off cap accommodates PROCLEAR Mineral Spa Sanitizer
- Filtration Area: 60 SQ FT
- Cartridge lasts up to 18 months with routine care
*New part number 6000-383AJ* is the same as old part number 6000-383
$109.50 -
Jacuzzi Proclear Filter 6000-383AJ
- Diameter: 6 3/4″ Length: 15 1/2″ Bottom: 2″ SAE thread
- Genuine Jacuzzi Parts
- Twist off cap accommodates PROCLEAR Mineral Spa Sanitizer
- Filtration Area: 60 SQ FT
- Cartridge lasts up to 18 months with routine care
$59.95 -
Jacuzzi Proclear II Filter 2540-383J
- Jacuzzi part 2540-383J
- 19” tall, 6” diameter, 2.38” hole
- Genuine Jacuzzi quality
- 75sqft filtration material to protect your spa’s machinery from particles and debris
- See compatibility list below
$62.50 -
Jacuzzi Proclear II Filter 2540-387
- GENUINE JACUZZI QUALITY | This filter is made by Jacuzzi, the same company that made your hot tub
- GUARANTEED COMPATIBILITY | Works with 2006–2012 J-465, J-470, and J-480 hot tubs. See description for more details
- SPECIALIZED FILTRATION | Designed by Jacuzzi specifically for J-400 series hot tub
$44.50 -
Jacuzzi ProClear II Filter Cartridge 2000-498
- 45 square feet of pleated filtration media
- Lasts up to 18 months with regular cleanings
- Designed for older J-460 and J-465 model hot tubs
- Genuine Jacuzzi part # 2000-498
- Fits J-400 2006–2011 spas (see list below for specifics)
$49.50 -
Jacuzzi ProClear Mineral Spa Sanitizer 2890-185
- Exclusively designed to work in your Jacuzzi Hot Tub. Simply drops right into your filter
- Works with your existing filtration system
- Hassle-free maintenance
- Leaves water softer and clearer
- Controlled Release Technology (CRT) ensures optimal mineral levels and no staining
$40.50 -
Life Spa Booster Seat in Black
- Designed for comfort, this booster seat is made of durable, chemical-resistant material
- The increased seat height elevates you closer to the spa jets or it may be used as back support
- Firmness and size can be adjusted by the amount of water used to fill it
- Easily filled with a standard garden hose
$17.50 -
Nordic Replacement Filter (Unicel #C-2302)
- Nordic Spas replacement filters by Unicel
- Industry’s most complete line of replacement filter elements
- Manufacturer part number C-2302
- Diameter: 2 7/8 inches
- Length: 17 1/16 inches
- Top: Open 1 1/16 inch inner diameter
- Bottom: Open 1 1/16 inch inner diameter
$30.50 -
Nordic Replacement Filter (Unicel #C-4326)
- Nordic Spas replacement filters by Unicel
- Industry’s most complete line of replacement filter elements
- Manufacturer part number C-4326
- !25 Sq FtLength: 13 5/16″Outside Diameter: 4 15/16″”Top Hole: 2 1/8″ OpenBottom Hole: 2 1/8″
$34.50 -
Nordic Replacement Filter (Unicel part #4CH-935)
- Nordic Spas replacement filters by Unicel
- Industry’s most complete line of replacement filter elements
- Manufacturer part number 4CH-935
- Bottom End Cap 2″ (inside diameter) female SAE thread 0″ id
$46.50
