Shop
-
373045S | Sundance 50 Sq/Ft Filter
- GENUINE SUNDANCE SPAS PARTS | Manufactured by Sundance Spas
- GUARANTEED COMPATIBLE | compatible with Jacuzzi spas that use filter 373045J
- CLEAN, CLEAR PERFORMANCE |
- Height: 9”, Diameter: 6” 45 square feet of filtration material
$49.50 -
Sundance (Wrap Around/Portofino) Pillow 6472-962
- SUNDANCE Spa Wrap Around Pillow (6472-962)
- Compatible with Sundance Spas 880 series from 2001–2014 (see list below)
- Includes Insert Pillow
- Does not include attachment screws (part #6570-231)
$73.99 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
Sundance Sunscents Aromatherapy Cartridges (2-pack)
- Used on Sundance Spas 880 & 980 Series hot tubs
- Installed onto the patented SilentAir Aromatherapy system (standard)
- Powerful SilentAir blower quietly sends 1000’s of soothing bubbles through multiple designated jets with just the touch of a button.
- SunScents are a wonderful way to add aromatherapy to your Sundance Hot Tub
- Will not make your spa water oily or foamy
$13.50 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
Jacuzzi J-500 Pillow 2472-005
- Fits 2015+ JACUZZI®® models J-585 & J-575
- Replaces old part #2455-266
- 4 Total pillows on spa
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$40.50 -
Jacuzzi HydroSoothe Pillow Assembly 2472-136
- Jacuzzi J-300 Hydrosoothe Pillow Assembly
- Jacuzzi J300 manufactured in 2020
- Pillow comes with the back fitting
- Part #2472-136
$53.50 -
Jacuzzi Proclear Filter 6000-383 (2-pack)
- This 2-pack will make it easier to switch out both filters at the same time!
- Diameter: 6 3/4″ Length: 15 1/2″ Bottom: 2″ SAE thread
- Genuine Jacuzzi Parts
- Twist off cap accommodates PROCLEAR Mineral Spa Sanitizer
- Filtration Area: 60 SQ FT
- Cartridge lasts up to 18 months with routine care
*New part number 6000-383AJ* is the same as old part number 6000-383
$109.50 -
FROG® @ease® Cartridge Holder for Jacuzzi Hot Tubs
- Most Jacuzzi hot tubs after 2010 can be upgraded to use Frog @Ease
- Spa Frog is the leading designer of mineral sanitizing systems
- The cartridge holder fits J-300, J-400, J-LX, and J-500 series tubs
- It is Jacuzzi Part number 6720-412
The @ease System for Jacuzzi hot tubs is the manufacturer-recommended method of keeping your hot tub free of germs and algae. Upgrade your spa with ease. Jacuzzi hot tubs prior to 2021 require a one-time purchase of this Frog cartridge holder.
$25.99 -
Hot Tub Things FROG® @ease® Starter Kit for Sundance Spas
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$89.50 -
Sundance / Jacuzzi Pillow Attachment Screw 6570-231
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
$2.99 -
Hot Tub Things FROG® @ease Starter Kit for Jacuzzi Hot Tubs
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$89.50 -
Sundance / Jacuzzi Replacement Quartz Tube 6472-859
- GENUINE CLEARRAY | This genuine ClearRAY tube is made by Sundance Spas, part # 6472-859
- GUARANTEED COMPATIBLE | Tube fits CLEARRAY XL bulbs in both Sundance Spas and Jacuzzi-brand hot tubs
- CRYSTAL CLEAR | The pure mineral quartz of this tube provides optimal light pass-through so you get maximum UV sanitation efficiency
- INSTALLATION KIT | Comes with latex glove (fingerprints can shorten system life) and complete instructions
- As of Summer 2019, an O-ring is not included with the replacement tube.
$35.99 -
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
Sundance 680 Series 2003+ 6472-970
- Sundance 680 Series Spas Replacement Pillow
- Ball socket, contoured fit over spa lip, classic dimple massage texture, Sundance logo
- Replaces 6455-474
$35.50 -
Jacuzzi Pillow (back mount) 2455-105
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
Jacuzzi Pillow (insert only) 2455-104
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
6472-719 | Sundance 780 Series Pillow
- 780 Series Pillow April 2017+
- Replaced 6455-502
$36.50 -
Sundance 880 Series Pillow 2019+ 6472-793
- Sundance® Spas 880 Series 2019+
- Not used in the 2018+ Marin or Cambria 880 Series
- Replaced 6455-025
$37.50 -
Jacuzzi J-400 Series Pillow Slider 2570-401
- Jacuzzi® J-400 Series pillow slider level model 2570-401.
- This J400 slider level is used with J-400 series pillows.
- These fit J-400 Collection Pillows part # 2472-820 or part # 2472-822.
$14.25 -
Sundance 680 Prado Pillow 6472-755
- Genuine Sundance Spas brand part
- Perfect match for your Sundance Prado hot tub
- medium grey textured finish
- Replaces old part #6455-487
- Soft and luxurious
$37.50 -
Sundance 980 Series Pillow 6472-736
- Pillow for Sundance 980 Series Spas (Replaced 6455-501)
- Fits the 980 series 2016+
- OEM part #6472-736
$35.50 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
Sundance Spas MicroClean Filter Adapter 6540-503
This filter accessory allows you to attach Sundance Spas filters 6540-501 and 6540-502 (sold separately) to your spa. This is not a disposable part; it will stand up to repeated cleanings and be retained as you clean and replace filters.
Compatibility:2002–2005 850 and 850E spas2006–2012 780 Spas2011–2012 Select Spas$30.50 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Sundance Sweetwater Pillow 6472-972
- Replacement Sundance Pillow
- Replaces original SKU: 6455-452
- Does not include the Bracket Mount.
- See description below for a list of compatible Sweetwater Spas.
$30.50 -
373045J | Jacuzzi J-200 50 Sq/Ft Filter
- GENUINE JACUZZI HOT TUB PARTS | Manufactured by Jacuzzi
- GUARANTEED COMPATIBLE | compatible with Sundance Spas that use filter 373045S
- CLEAN, CLEAR PERFORMANCE
- Height: 9”, Diameter: 6” 45 square feet of filtration material
$49.50 -
Jacuzzi J-LX®/J-LXL® Filter Cartridge 6540-164J
- Jacuzzi filter with removeable cap (6541-384) that you can use with the 2890-185 Mineral Purifier.
- 6540-164 J-LX®/J-LXL® Series Filter Cartridge with Cap – 75 sq. ft.
- Jets Pump 1 Cartridge for 2012+ Jacuzzi® J-495, J-425, and J-415 models.
- Replaces filter part #2000-286
$55.50 -
Jacuzzi Proclear II Filter 2540-383J
- Jacuzzi part 2540-383J
- 19” tall, 6” diameter, 2.38” hole
- Genuine Jacuzzi quality
- 75sqft filtration material to protect your spa’s machinery from particles and debris
- See compatibility list below
$62.50 -
Jacuzzi ProClear II Filter Cartridge 2000-498
- 45 square feet of pleated filtration media
- Lasts up to 18 months with regular cleanings
- Designed for older J-460 and J-465 model hot tubs
- Genuine Jacuzzi part # 2000-498
- Fits J-400 2006–2011 spas (see list below for specifics)
$49.50
