Shop
-
SpaGuard® Rapid-Dissolve Alkalinity Increaser Tabs (1.25 lb)
- Control pH bounce by quickly raising total alkalinity
- Helps protect equipment from corrosion
- 2 tabs per 250 gallons – 1000 liters as needed
- Raises total alkalinity by 30 ppm
$15.99 -
SpaGuard® Rapid-Dissolve Chlorinating Tabs (1.25 lb)
- Quick-dissolving sanitizer and oxidizer
- Single-dose, 1” tab per 300/600 gallons – 1200-2700 liters weekly
- Administers 3-5ppm of free chlorine
$34.99 -
SpaGuard® Rapid-Dissolve pH Decreaser Tabs (1.25 lb)
- Quickly decrease pH level of spa water
- Provide soaker comfort and protect spa and swim spa equipment
- 2 tabs per 250 gallons – 1000 liters as needed
- Lowers pH 0.1 – 0.2 units
$12.99 -
SpaGuard® Rapid-Dissolve Shock Oxidizing Tabs (1.25 lb)
- Non-chlorine shock-oxidizer
- Quickly oxidizes non-living waste and contaminants**
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spas for 12+ weeks
$23.99 -
SpaGuard® Rapid-Dissolve Stain & Scale Tabs (1.25 lb)
- Controls metal-based staining & scaling
- Protects spa and swim spa equipment and surfaces
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spa for 12+ weeks
$28.99 -
Hot Tub Things Spa Defoamer (16 oz)
- Instantly zap foam with a dose of Spa Defoamer – breaks up existing foam in spas, hot tubs, and whirlpools!
- America’s #1 Trusted Brand of Hot Tub Chemicals
- Safety Tested to Assure Quality, Guaranteed Performance
- Formulated Exclusively for Hot Tubs And Made from the Purest Chemicals Available
- Compare to Leisure Time Foam Down
$22.50 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Hot Tub Things 282 Microban® Filter 2-pack (Compatible with Bullfrog Spas® 10-00282, Wellspring 30 Coreless, Pleatco PBF40 PFB40M, Filbur FC-9900)
- Newest filter addition to our Hot Tub Things family!
- Comparable to the Wellspring 282 filter for Bullfrog Spas®
- 2 Premium high-quality filter cartridges | Easy to Clean Microban Pleats | Powerful & Efficient Performance
- Includes two 282 filters per package
- Fits A Series, R Series, and X Series spas (2018 to present)
- A Series, R Series | 2013-2017 | you will need to purchase a Filter Cage Core Assembly (part #10-00417)
- Compatible to Wellspring 282, Unicel 8CH-950, Filbur FC-0536, Pleatco PBF50
$75.95 -
6455-468 | Jacuzzi® J-200 Series Snap-In Pillow
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
6472-968 | Sundance® 780 Series Sweetwater Chevron Pillow
- 472-968 formerly 6455-455, Sundance Pillow, 2005+ 780 Speaker Pillow
- Updated Pillows have Sundance Spas logo – some remaining inventory may have the Sweetwater logo.
- Does not include the Bracket Mount. Use with 6455-500, Pillow Mounting Bracket.
$38.50 -
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
6472-970 | Sundance 680 Series 2003+
- Sundance 680 Series Spas Replacement Pillow
- Ball socket, contoured fit over spa lip, classic dimple massage texture, Sundance logo
- Replaces 6455-474
$35.50 -
6472-719 | Sundance 780 Series Pillow
- 780 Series Pillow April 2017+
- Replaced 6455-502
$36.50 -
6472-793 | Sundance 880 Series Pillow 2019+
- Sundance® Spas 880 Series 2019+
- Not used in the 2018+ Marin or Cambria 880 Series
- Replaced 6455-025
$37.50 -
6472-766 | Sundance 980 Series 2019+
- Pillow: 2019+ 980 Series (Lisbon only)
- Replaced 6455-024
$38.99 -
6472-736 | Sundance® Spas 980 Series (2016+)
- Pillow for Sundance 980 Series Spas (Replaced 6455-501)
- Fits the 980 series 2016+
- OEM part #6472-736
$35.50 -
6472-702 | Sundance Cushion Filter Lid
- Aftermarket Seat Pillow converts lid into functional seat
- only works with OEM Acrylic lid for 2018 & 2019 Marin/Cambria
- Fits Into Integrated Beverage Concierge
$81.25 -
6472-974 | Sundance Pillow for Sweetwater Spas
- OEM ball and socket Sundance Sweetwater pillow
- Sundance Sweetwater Spas replacement pillow
- Replaces 6455-451
$35.50 -
6472-765 | Sundance Select Series 2011-2018 Pillow
- Select Series 2018
- Replaced part #6455-008
$33.50 -
6472-637 | Sundance Spas Drink Tray (2003+)
- Replacement drink tray for 2003 and newer Sundance Spas in the 780 Series.
- This gray drink tray has 4 medium and one large circular cutout.
- Grey, designed for 780 Series Spas.
$50.50 -
6455-482 | Sundance Pillow Chevron Gray Insert
- Used on 2001+ Sundance models with plastic screw fastener.
- Insert used with 2001–2008 880 Series Sundance Spas (see list)
- Original Sundance Spa Part
$18.99 -
6455-423 | Sundance Spa® Wrap Pillow w/ Suction Cups
- Wrap Around Pillow for 1986-1997 SUNDANCE® Spas
- “suction cup” style pillow which replaced older “ball and socket” style pillows
- OEM Sundance part #6455-423
$77.75 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
303® Aerospace Protectant (1 gal)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$64.95 -
303® Aerospace Protectant (16 oz)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$16.95 -
303® Aerospace Protectant (32 oz)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$27.95 -
303® Marine Fabric Guard (16 oz)
- Restores lost water and stain repellency to factory new levels
- Provides strong resistance against soiling
- Protects against water-based and oil-based stains
- Does not alter fabric color, feel, flammability or breathability
- Safe for the synthetic or natural fibers
$22.95 -
303® Multi-Surface Cleaner (16 oz)
-
303 Multi-Surface Cleaner is safe to use on a variety of surfaces, such as:
- Fabrics: 303 Multi-Surface Cleaner works on all water-safe fabrics and designed to clean even the most delicate fabrics
- Stainless Steel and Chrome: After a family outing, clean up food and drink marks from your boat’s interior and galley.
- Vinyl, Rubber and Plastics: Use on your boat or spa cover to remove dirt or water marks, perfect before sealing with 303 Aerospace Protectant.
- Metal, Aluminum, and Wicker: Take extra care of your furniture. 303 Multi-Surface Cleaner unique formula will rinse residue free.
$18.95 -
-
FROG® @ease® Test Strips for Hot Tubs
Frog @ease SmartChlor Technology Test Strips easily test the chlorine level in hot tubs using the Frog @ease sanitizing system. Each strips tests for SmartChlor, Total Alkalinity, pH and Total Hardness. Results are ready in just 2 seconds.
$15.50 -
FROG Maintain™, Non-chlorine Shock Treatment, 12 Pack
- Single-use packet means no measuring, no worry
- Formulated specifically for Frog brand sanitizers
- Chlorine free shock is safe to use with chlorine, bromine, and minerals
- Shock each time you switch the SmartChlor or Serene bromine cartridge
$59.95 -
Hot Tub Things FROG® @ease® Starter Kit for Bullfrog Spas
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$89.50 -
Hot Tub Things Filter (compatible with Sundance® 6473-164)
- Replacement for Sundance Spas Microclean Inner Filter 6473-164
- Inner Filter is used on Sundance Spas 880 Series and 850 Series
- Inner Filter used with 6473-165 Outer Filter
- 100% compatible with Sundance Spa Parts and Filters
- Height: 18.74″ Diameter: 5.63″
$35.95 -
Hot Tub Things Filter (compatible with Jacuzzi® 6000-383AJ)
- FULLY COMPATIBLE | The replacement filter fits perfectly in most modern J-300 series hot tubs, so you can purify your residential hot tub while saving money over name-brand Jacuzzi filters
- SUPERIOR FILTRATION | The pleated filtration fabric exposes the maximum surface area (60 sq ft) to your water flow
- SUITABLE FOR ALL CHEMISTRIES | The filter is compatible with bromine, chlorine, UV-ray, and the ProClear mineral sanitizer (sold separately)
$45.95 -
Hot Tub Things Filter (compatible with Sundance® 6473-165)
Please Note: This is an outer filter only. Doesn’t include Hot Tub Things 6473-164 inner filter cartridge
- This is the OUTER FILTER ONLY. Doesn’t include Hot Tub Things 6473-164 inner filter cartridge. Again this doesn’t include the inner filter cartridge. You’ll have to buy the inner cartridge as well for a proper fitting in the spa.
$60.95 -
Hot Tub Things Filter (compatible with Sundance® 6540-488)
- PURE PEACE OF MIND | Clean water makes for a better, more relaxing soak.
- LOW MAINTENANCE
- COMPLETE COMPATABILITY | installs easily and performs just as well as the name brand Sundance Filter.
- ECO- FRIENDLY CHOICE
- FOCUSED ON COMFORT | Hot Tub Things has provided spa services and hot tub supplies for over 20 years. Let us help you take care of your backyard oasis.
$67.95 -
Hot Tub Things Filter (compatible with Sundance® 6540-501)
Please Note: This is the pleated portion. 14″ tall, 8.5″ in diameter. Most Sundance Spas hot tubs that use this filter will also need the disposable spun-polymer filter “doughnut,” part 6540-502.
- FULLY COMPATIBLE | The replacement filter fits perfectly in Sundance Select series hot tubs, so you can purify your residential hot tub while saving money over name-brand Sundance filters
- SUPERIOR FILTRATION | The pleated filtration fabric exposes the maximum surface area to your water flow
- SUITABLE FOR ALL CHEMISTRIES | The filter is compatible with bromine, chlorine, UV-ray, and the SunPurity mineral sanitizer (sold separately)
$47.95 -
Hot Tub Things Filter (compatible with Sundance® 6540-502)
Please Note: This is the disposable, spun-polymer filter. It is “doughnut” shaped. 5″ tall, 7.75″ in diameter. Most Sundance Spas hot tubs that use this filter will also need the pleated filter cartridge HTT-6540-501 or comparable Sundance Filter.
- SINGLE PACK | Save money and resources. lasts up to 6 months
- FULLY COMPATIBLE | The replacement filter fits perfectly in Sundance Select series hot tubs, so you can purify your residential hot tub while saving money over name-brand Sundance filters
- SUPERIOR FILTRATION | The blown polymer strands in this filter nest tightly to screen out even microscopic-sized particles
- SUITABLE FOR ALL CHEMISTRIES | The filter is compatible with bromine, chlorine, UV-ray, and the SunPurity mineral sanitizer (sold separately)
$18.50 -
2540-389 | Jacuzzi ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
2540-381J | Jacuzzi® J-200™ 95 sq. ft. Filter
- GENUINE | Enjoy the peace of mind that comes from Jacuzzi quality water filters
- EFFECTIVE | Woven filtration protects your water, your family, and your equipment from harmful dirt and particles
- DURABLE | The 2540-381J filter can withstand repeated washing and rinsing with an approved cartridge cleaner (sold separately), so you can get maximum life out of your purchase
- ECONOMICAL | Replace the filter regularly to protect the pumps and plumbing of your hot tub
$68.50 -
2472-136 | Jacuzzi J300™ HYDROSOOTHE™ Massage Pillow
- Jacuzzi J-300 Hydrosoothe Massage Pillow Complete Assembluy
- Jacuzzi J300 manufactured in 2020
- Hydrosoothe installation
- Contains pillow and following items:
- A. 6541-336, Inner Ring: Pillow, Massage, J-300 2020
- B. 6541-361, Outer Ring: Pillow, Massage, J-300 2020
- C. 6541-403, Bushing: Pillow, J-300 2020 (2 Req)
- D. 6540-547, Nut: .5-13 Nylon Wing (2 Req)
$53.50 -
2472-828 | Jacuzzi J-200 Pillow
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Soft and Comfortable – Restore your spa to its original look and comfort
$32.50 -
-
2472-831 | Jacuzzi® J215/J225™ Pillow
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
- Hydrosoothe installation
$40.50 -
2472-007 | Jacuzzi J-400 pillow (J445/J435/J475/J485)
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
- Compatible with all current J400 models and J-445 & J-435 10/2017+, J-485 & J-475 2019+, All J-400 2020+
$42.50 -
2472-820 | Jacuzzi J-400 Pillow Assembly (2009+)
- Genuine Jacuzzi brand part
- Perfect match for your J-400 series hot tub
- Clear window for headrest lighting
The mounting hardware is not included. Contact your licensed Jacuzzi repair technician if you require new plastic mounting hardware.
$43.50 -
2472-822 | Jacuzzi® J-400 Series Pillow (2006-2009)
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
2472-005 | Jacuzzi J-500 Pillow
- Replaces old part #2455-266
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$40.50