Shop
-
100504 | Covermate III Plastic – Right Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the rightside mounting bracket
- OEM part #100504
$75.00 -
101510 | Compression Damped Non-locking Shock 75#
- Replacement compression damped non-locking shock – lift. 75 lb.
- OEM #101510from Leisure Concepts
- Replaces old part #100245
- To see if your lifter is compatible, visit https://leisureconcepts.com/installation-instructions/
$36.75 -
101632 | Compression Damped Locking Shock 75#
- Replacement locking shock/strut for CoverMate 3 spa cover lift. 75 lb.
- Features red button type locking mechanism.
- OEM #101632 from Leisure Concepts
$49.95 -
Leisure Time® Spa Down (2 lb)
Spa Down by Leisure Time is designed to lower the pH and total alkalinity levels in your hot tub. By maintaining a proper pH level between 7.2 to 7.6 you can swim in comfort and protect your hot tub. Also, proper pH level is required to ensure that your sanitizers can effectively kill bacteria and other contaminants properly.
$14.95 -
Leisure Time® Spa Up (2 lbs)
A granular product that raises pH and total alkalinity levels in hot water. Increases the effectiveness of the sanitizer when levels are in range.
$14.95 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
100002 | CoverMate Foam Grip
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Comes as a set of 1 (1 foam grip)
- OEM #100002
$15.00 -
100008 | CoverMate Towelmate
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Does not include mounting screws
- OEM #100008
$18.00 -
DuraStep II (Portobello)
- Large, slip-resistant tread for safety
- Tested up to 700 lbs
- Locks together in seconds
- Strong, stable and attractive
- Unique patented reversible tread design can accommodate round or square spas
$109.00$169.00 -
6455-468 | Jacuzzi® J-200 Series Snap-In Pillow
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Leisure Time® Bright & Clear Clarifier (32 fl oz)
- Leisure Time® Bright & Clear is a fast-acting, easy-to-use clarifying treatment keeps spa and hot tub water clear and fresh so you can focus on relaxation
- Unique polymer action neutralizes dirt, soap, oils and other organics that can cause odors and cloudy spa water
- Combines small, suspended particles in hot water so they can be easily trapped by the filter
- Improves spa and hot tub filter efficiency and restores sparkle to dull spa water
- Compatible with chlorine, bromine, ozone and biguanide sanitizers
- The simple routine from Leisure Time® helps you reduce water care time for a more relaxing spa experience
$20.95 -
Leisure Time Calcium Booster (1 lb)
- Updated packaging
- updated granular contents – 1lb.
Leisure Time Calcium Booster is used to increase spa water hardness. Spa water containing low levels of calcium will etch plater and corrode equipment. Low calcium levels will also cause spa or hot tub water to foam. Maintaining a hardness level will help protect your spa from these harmful effects.
$13.95 -
Leisure Time Filter Clean (32 fl oz)
- BENEFITS: Improves the efficiency and life of the filter
- USE: Soak solution overnight for maximum effect; use when draining and refilling spa or hot tub
- COMPATIBILITY: Chlorine, bromine, ozone and mineral purification systems
$23.95 -
Leisure Time Metal Gon (16 fl oz)
Leisure Time Metal Gon sequesters iron, copper and other minerals and prevents staining of spa surfaces. It is highly concentrated and only needs to be added upon start-up. Use each refill to quickly neutralize metals in your spa or hot tub and prevent stains.
$16.95 -
Leisure Time Enzyme (32 fl oz)
Leisure Time Enzyme is a blend of natural enzymes that breaks down the oil, lotion, and organics that cause unsightly scum lines and odors in spa water. Enzyme helps reduce the need for maintenance of filters and spa surfaces. Works with all types of sanitizers.
$18.95 -
Leisure Time Renew® Granular (2.2lbs)
A non-chlorine shock oxidizer treatment with a buffering agent that helps eliminate odors and clear cloudy water by reducing irritating contaminants.
- Use with the Leisure Time® Reserve & Renew® System.
- Compatible with chlorine, bromine, ozone and mineral purification systems.
$26.95 -
Leisure Time Sodium Bromide (1 lb)
Leisure Time Sodium Bromide establishes an immediate bromide reserve in your spa. This product is for use with brominating tablets. When used with Leisure Time Brom Tabs, the disinfection of the spa will be completely bromine-based and chlorine odors will not exist.
It is important to note that Sodium Bromide is not a disinfectant. It is used to establish a reserve of bromide in spa or hot tub water. It is necessary to use a sanitizer to disinfect the water.
$22.99 -
Leisure Time Sodium Bromide packets (6-pack)
- Quick and Easy sodium bromide starter packets
- Comes in a pack of 6
- Establishes a bromide reserve
- When used with Brom Tabs, , water will be completely bromine-based!
- Chlorine odors will no longer be an issue.
$25.95 -
Leisure Time® Spa 56 Chlorinating Granules (2 lb)
- BENEFITS: Destroys organic contaminants to maintain clean, clear, sanitized water
- USE: Specifically formulated for spa and hot tubs
- COMPATIBILITY: Chlorine sanitizing systems
- FEATURES: Quick dissolving, EPA approved formula, helps control algae growth, maintains water clean, clear, and sanitized
- ACTIVE INGREDIENTS: Sodium Dichloro-s-Triazinetrione Dihydrate
$30.99 -
Leisure Time® Spa 56 Chlorinating Granules (5 lb)
- BENEFITS: Destroys organic contaminants to maintain clean, clear, sanitized water
- USE: Specifically formulated for spa and hot tubs
- COMPATIBILITY: Chlorine sanitizing systems
- FEATURES: Quick dissolving, EPA approved formula, helps control algae growth, maintains water clean, clear, and sanitized
- ACTIVE INGREDIENTS: Sodium Dichloro-s-Triazinetrione Dihydrate
$73.99 -
Leisure Time Spa Defender (32 fl oz)
A unique blend of organic polymers designed to prevent scale formation, aid in the removal of existing scale and to help prevent precipitation of dissolved solids in spas or hot tubs.
Useful Tips
- Use weekly for continued protection from scale
- Compatible with chlorine, bromine, ozone and biguanide sanitizers
$24.95 -
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
2540-389 | Jacuzzi ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
2540-381J | Jacuzzi® J-200™ 95 sq. ft. Filter
- GENUINE | Enjoy the peace of mind that comes from Jacuzzi quality water filters
- EFFECTIVE | Woven filtration protects your water, your family, and your equipment from harmful dirt and particles
- DURABLE | The 2540-381J filter can withstand repeated washing and rinsing with an approved cartridge cleaner (sold separately), so you can get maximum life out of your purchase
- ECONOMICAL | Replace the filter regularly to protect the pumps and plumbing of your hot tub
$68.50 -
2472-136 | Jacuzzi J300™ HYDROSOOTHE™ Massage Pillow
- Jacuzzi J-300 Hydrosoothe Massage Pillow Complete Assembluy
- Jacuzzi J300 manufactured in 2020
- Hydrosoothe installation
- Contains pillow and following items:
- A. 6541-336, Inner Ring: Pillow, Massage, J-300 2020
- B. 6541-361, Outer Ring: Pillow, Massage, J-300 2020
- C. 6541-403, Bushing: Pillow, J-300 2020 (2 Req)
- D. 6540-547, Nut: .5-13 Nylon Wing (2 Req)
$53.50 -
2472-828 | Jacuzzi J-200 Pillow
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Compatible – Fits All J-280 and J-270 hot tubs. See description for additional tubs
-
Soft and Comfortable – Restore your spa to its original look and comfort
-
No hardware required – Single plastic bolt in the back secures it to the existing mount in your tub
$32.50 -
-
2472-831 | Jacuzzi® J215/J225™ Pillow
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
- Hydrosoothe installation
$40.50 -
2472-007 | Jacuzzi J-400 pillow (J445/J435/J475/J485)
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
- Compatible with all current J400 models and J-445 & J-435 10/2017+, J-485 & J-475 2019+, All J-400 2020+
$42.50 -
2472-820 | Jacuzzi J-400 Pillow Assembly (2009+)
- Genuine Jacuzzi brand part
- Perfect match for your J-400 series hot tub
- Clear window for headrest lighting
The mounting hardware is not included. Contact your licensed Jacuzzi repair technician if you require new plastic mounting hardware.
$43.50 -
2472-822 | Jacuzzi® J-400 Series Pillow (2006-2009)
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
2472-005 | Jacuzzi J-500 Pillow
- Replaces old part #2455-266
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$40.50 -
6540-164J | Jacuzzi® J-LX®/J-LXL®/J-400 Filter Cartridge (2011+)
- Jacuzzi filter with removeable cap (6541-384) that you can use with the 2890-185 Mineral Purifier.
- 6540-164 J-LX®/J-LXL® Series Filter Cartridge with Cap – 75 sq. ft.
- Jets Pump 1 Cartridge for 2012+ Jacuzzi® J-495, J-425, and J-415 models.
- Replaces filter part #2000-286
$55.50 -
6455-485 | Jacuzzi J-LX/J-LXL Pillow (2011+)
- Jacuzzi J-LX/J-LXL Pillow Replacement
- 2011+
- Snap-in
$34.50 -
2455-105 | Jacuzzi J-300 Pillow (back mount)
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
2455-104 | Jacuzzi J-300 Pillow (insert only)
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
2472-826 | Jacuzzi J-300 Series Pillow Base and insert (2007+)
- Genuine Jacuzzi brand part
- Perfect match for your older J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 2455-104 insert
$42.50 -
2472-824 | Jacuzzi® J-300™ Pillow (Pillow Insert & Back Mount)
- Genuine Jacuzzi brand part
- Perfect match for your J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 6455-488 insert
$42.50 -
2540-380 | 25 Sq. Ft. Filter Cartridge
- Genuine Jacuzzi Part, guaranteed quality and compatibility
- Compatible with JWB and Echo spas, 2001 and older hot tubs
- 25 square feet of filtration material for clean, clear water
$40.99$59.50 -
6473-158J | Jacuzzi Proclarity Depth Load Filter
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-161 for 2012 models of J-480, J-470, and J-465
$57.50 -
6473-161J | Jacuzzi Proclarity Depth Load Filter
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-157 (All 2013+ models of J-400 series Jacuzzi hot tubs)
- Use with Jacuzzi Filter 6473-158 for 2012 models of J-480, J-470, and J-465
$34.95 -
6473-157J | Jacuzzi J-400 ProClarity Filter (2012+)
- ECONOMICAL | Each ProClear filter cartridge lasts up to 18 months, keeping your hot tub clean and relaxing
- GENUINE JACUZZI | These Jacuzzi 6473-157 Filters bear the Jacuzzi name and seal of quality
- OEM part #6473-157J
$54.95 -
2540-384J | Jacuzzi® ProClear II Filter Cartridge
- GENUINE JACUZZI | Filter is made by the same company that made your hot tub, so you know it will work perfectly
- 25 SqFt AREA | The tight pleating exposes maximum surface area so the filter can hold more debris
- FOR J-400 HOT TUBS | This is a Jet Pump filter for J-460 and J-465 hot tubs only
$42.50 -
6000-383AJ2 | Jacuzzi Proclear Filter (2-pack)
- This 2-pack will make it easier to switch out both filters at the same time!
- Diameter: 6 3/4″ Length: 15 1/2″ Bottom: 2″ SAE thread
- Genuine Jacuzzi Parts
- Twist off cap accommodates PROCLEAR Mineral Spa Sanitizer
- Filtration Area: 60 SQ FT
- Cartridge lasts up to 18 months with routine care
*New part number 6000-383AJ* is the same as old part number 6000-383
$109.95 -
6000-383AJ | Jacuzzi Proclear Filter (Single)
- Diameter: 6 3/4″ Length: 15 1/2″ Bottom: 2″ SAE thread
- Genuine Jacuzzi Parts
- Twist off cap accommodates PROCLEAR Mineral Spa Sanitizer
- Filtration Area: 60 SQ FT
- Cartridge lasts up to 18 months with routine care
$59.95 -
2540-383J | Jacuzzi® ProClear™ II 75sqft Filter Cartridge
- Jacuzzi part 2540-383J
- 19” tall, 6” diameter, 2.38” hole
- Genuine Jacuzzi quality
- 75sqft filtration material to protect your spa’s machinery from particles and debris
- See compatibility list below
$62.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50