Shop
Want to keep your stuff looking newer, longer? When UV protection and surface finish matter to you, 303 Products has the solution.
-
SmartStep (Coastal Grey)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Portabello)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep Jr (Black)
- Manufactured by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Includes a single SmartDrawer
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$99.00 -
SpaGuard Brominating Concentrate (2 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$27.99 -
SpaGuard Brominating Concentrate (6 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$77.99 -
SpaGuard Enhanced Shock (6 lb)
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$52.99 -
SpaGuard Natural Spa Enzyme (32 oz)
• Enzyme formulation breaks down oils naturally
• pH~3.0-4.5
• Reduces scum line build-up and odors
• Controls cloudy water
• Improves Filtration
• Reduces maintenance time
• Keeps spa clean longer$26.99 -
SpaGuard Spa Sentry® (32 oz)
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$25.99 -
SpaGuard® Rapid-Dissolve Alkalinity Increaser Tabs (1.25 lb)
- Control pH bounce by quickly raising total alkalinity
- Helps protect equipment from corrosion
- 2 tabs per 250 gallons – 1000 liters as needed
- Raises total alkalinity by 30 ppm
$15.99 -
SpaGuard® Rapid-Dissolve Chlorinating Tabs (1.25 lb)
- Quick-dissolving sanitizer and oxidizer
- Single-dose, 1” tab per 300/600 gallons – 1200-2700 liters weekly
- Administers 3-5ppm of free chlorine
$34.99 -
SpaGuard® Rapid-Dissolve pH Decreaser Tabs (1.25 lb)
- Quickly decrease pH level of spa water
- Provide soaker comfort and protect spa and swim spa equipment
- 2 tabs per 250 gallons – 1000 liters as needed
- Lowers pH 0.1 – 0.2 units
$12.99 -
SpaGuard® Rapid-Dissolve Shock Oxidizing Tabs (1.25 lb)
- Non-chlorine shock-oxidizer
- Quickly oxidizes non-living waste and contaminants**
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spas for 12+ weeks
$23.99 -
SpaGuard® Rapid-Dissolve Stain & Scale Tabs (1.25 lb)
- Controls metal-based staining & scaling
- Protects spa and swim spa equipment and surfaces
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spa for 12+ weeks
$28.99 -
100503 | Covermate III Plastic – Left Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the left side mounting bracket
- OEM part #100503Covermate III Plastic Installation Instructions
$75.00 -
100504 | Covermate III Plastic – Right Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the rightside mounting bracket
- OEM part #100504
$75.00 -
101510 | Compression Damped Non-locking Shock 75#
- Replacement compression damped non-locking shock – lift. 75 lb.
- OEM #101510from Leisure Concepts
- Replaces old part #100245
- To see if your lifter is compatible, visit https://leisureconcepts.com/installation-instructions/
$36.75 -
101632 | Compression Damped Locking Shock 75#
- Replacement locking shock/strut for CoverMate 3 spa cover lift. 75 lb.
- Features red button type locking mechanism.
- OEM #101632 from Leisure Concepts
$49.95 -
45-01972 | M-Series Cover Buckles (black)
Brand: Bullfrog Spas
Model: M-Series Spas
Year(s): 2020 – Present
Color: Black
Quantity: Set of 4 (with keys and mounting screws)
$50.50 -
DISCONTINUED | 60-01445 | A-Series Filter Pillow (2020-Present)
Pillow has been discontinued | limited availability | once inventory is depleted, it will not be restocked
Replace with new pillow part #60-02022 & part #60-1405
$61.79 -
60-1245 | A-Series Regular Jetpak Pillow (2013-2015)
Brand: Bullfrog SpasModel Year(s): 2013 – 2015PILLOW, “A” SERIES GRAY
$48.50 -
60-1255 | A-Series NeckMasseusse and Neckblaster JetPak Pillow (2013-2015)
Brand: Bullfrog SpasModel Year(s): 2013 – 2015PILLOW, “A” SERIES NECK GRAY
$48.50 -
60-1405 | Filter Snapcap Assembly (2016-Present)
- Filter snapcap for A Series spas
- Assembly comes with hidden clips
- 2016-2019
$62.50 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
60-1390 | Bullfrog Headrest, X-Series (2015-present)
- Replacement headrest for X Series spas
- High density foam
- Gray
- 2015-present
$39.50 -
100002 | CoverMate Foam Grip
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Comes as a set of 1 (1 foam grip)
- OEM #100002
$15.00 -
100008 | CoverMate Towelmate
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Does not include mounting screws
- OEM #100008
$18.00 -
DuraStep II (Portobello)
- Large, slip-resistant tread for safety
- Tested up to 700 lbs
- Locks together in seconds
- Strong, stable and attractive
- Unique patented reversible tread design can accommodate round or square spas
$109.00$169.00 -
6455-468 | Jacuzzi® J-200 Series Snap-In Pillow
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
303® Aerospace Protectant (1 gal)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$64.95 -
303® Aerospace Protectant (16 oz)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$16.95 -
303® Aerospace Protectant (32 oz)
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$27.95 -
303® Marine Fabric Guard (16 oz)
- Restores lost water and stain repellency to factory new levels
- Provides strong resistance against soiling
- Protects against water-based and oil-based stains
- Does not alter fabric color, feel, flammability or breathability
- Safe for the synthetic or natural fibers
$22.95 -
303® Multi-Surface Cleaner (16 oz)
-
303 Multi-Surface Cleaner is safe to use on a variety of surfaces, such as:
- Fabrics: 303 Multi-Surface Cleaner works on all water-safe fabrics and designed to clean even the most delicate fabrics
- Stainless Steel and Chrome: After a family outing, clean up food and drink marks from your boat’s interior and galley.
- Vinyl, Rubber and Plastics: Use on your boat or spa cover to remove dirt or water marks, perfect before sealing with 303 Aerospace Protectant.
- Metal, Aluminum, and Wicker: Take extra care of your furniture. 303 Multi-Surface Cleaner unique formula will rinse residue free.
$18.95 -
-
60-1160 | Bullfrog Air Comfort Headrest (2002-2012)
- Air Comfort Headrest
- Color: Black.
- Fits all Bullfrog Spas & Tadpole spas
- 2002-2012
- Replaces the gray pillow part #60-1165
$38.50 -
DISCONTINUED | 60-1165 | Bullfrog Air Comfort Pillow (2002-2012)
- This pillow is now discontinued – Once inventory is depleted, the pillow will not be restocked.
- Air Comfort 10 1/8″ wide replacement spa pillow
- select model Bullfrog Spas made between 2009-2012
- Snaps into jet packs
- Replaced by part #60-1160
$29.89 -
10-2870 | Bullfrog Wellspring Filter Cartridge with Microban® (2013-2016)
- Designed for the A Series, R Series and X Series
- Can be replaced with Coreless Filters #10-00416 with the addition of the Filter Cage Core #10-00417
- 1 x Bullfrog Spas Wellspring 10-2870 Spa Filter
- This filter replaces filter #10-1035 & #10-2785
$59.50 -
60-02022 | Filter Pillow for A-Series, 2020 – Present
- A-series Filter Pillow
- Color: Black.
- 2020 – Present
- Replaces old pillow part #60-101445
- Snapcap (60-1405) is needed to use 2-snap pillow (60-01445)
$90.50 -
60-00073 | Bullfrog Headrest for Cascadia (waterfall) JetPak seats, A Series (2016-2019)
- Bullfrog replacement headrest for A-Series Waterfall for Cascadia
- For Cascadia seating area, hole allows waterfall pedestal feature
- Bullfrog Part # 60-00073
- Fits Bullfrog A-Series tubs 2016–2019
- Durable, high-density foam material
$51.29 -
60-01448 | Bullfrog Headrest for Cascadia (waterfall) JetPak seats, A Series 2020-present
- Bullfrog replacement headrest for A-Series Waterfall for Cascadia
- For Cascadia seating area, hole allows waterfall pedestal feature
- Bullfrog Part # 60-01448
- Fits Bullfrog A-Series tubs 2020+Present
- Durable, high-density foam material
$87.50 -
60-00037 | A Series Headrest for Filter Lid (2016-2019)
- Bullfrog replacement headrest for A-Series filter area
- Attaches to filter lid; not a pillow for JetPak seats
- Fits Bullfrog A-Series tubs 2016–2019
- Durable, high-density foam material
$67.50 -
60-01447 | Bullfrog Headrest for Neck JetPaks seats, A Series 2020-present
- Replacement headrest for use with NeckMasseusse and/orNeckBlaster JetPaks.
- Fits A Series spas, 2020-present.
- Bullfrog part #60-01447
- High-density foam material.
$79.50 -
60-00072 | A Series Headrest for NeckMasseusse and NeckBlaster JetPaks (2016-2019)
- Bullfrog replacement headrest for A-Series JetPak
- For neck-specific JetPaks such as NeckBlaster and NeckMasseuse
- Bullfrog Part # 60-00072
- Fits Bullfrog A-Series tubs 2016–2019
- Durable, high-density foam material
$55.50