-
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
FORM Smart Swim Goggles for Hydropool Swim Spas
What’s Inside:
- FORM Smart Swim Goggles
- Protective Goggles Case
- 7 Interchangeable Nose Bridges (XS-XL)
- Magnetic Charging Cable
- Heart Rate Mounting Clip (heart rate sensor not included)
- FREE 1-Year Membership with Access to In-Goggle Workouts and Training Plans
$218.99 -
FROG® @ease® for Jacuzzi Hot Tubs Upgrade Bundle
Time to finally upgrade your Jacuzzi Hot Tub with the FROG® @ease® system!
Bundle includes:
$80.95 -
Hydropool Small Wrap Pillow 8515047
- Used on some Self Clean and Swim Spa models produced after November 2015
- Slides into a tongue and groove design and fits over a clip that holds it into place
$38.50 -
Hydropool Wrap Pillow 8515048
- HYDROPOOL LARGE WRAP PILLOW WARM GREY
- Hydropool Part # 8515048
- Colour: Warm Grey
- Size: Approximately 28″
$49.99 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$53.50 -
Self Clean Filter & Ice Bucket Lid 5555289
- Hydropool Part # 5555289
- Self Clean Model
$49.99 -
Sundance / Jacuzzi Flow Switch 6560-860
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$48.75 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$1.75 -
Swimmo Training Watch for Hydropool
Features
- Swim Metrics: Automatic Lap Counter, Pace, Duration, Distance
- Bio Metrics: Calories you have burned, Heart Rate (Swimming), Heart Rate (other activities)
- Smart Swim Modes: Custom Swim Workouts (goals), Immediate Smart Feedback Alerts – Heart Rate, Immediate Smart Feedback Alerts – Pace, Immediate Smart Feedback Alerts – Goals and Progress
- Mobile APP and Integration
$250.00 -
Hydropool Charcoal Waterfall Pillow 8515024
- Hydropool Part # 8515024
- Colour: Charcoal
- Size: 12 inches
- The waterfall blade is required and not included.
$48.50 -
Hydropool Filter w/o Removable Core 4520008
Description: 75 Sq Ft Filter
Hydropool part #4520008
Produced by Second Nature
Note: This filter is interchangeable with Hydropool part #4520030. If you plan to use the inner core, please order #4520030
Hydropool model compatibility: See description below
$67.50 -
Hydropool Filter w/ Removable Core 4520029 (Pleatco #PRC50)
Description: 50sqft Dual Core Filter w Removable Core
Hydropool part #4520029
Pleatco part #PRC50
Hydropool model compatability: 12FX AquaPlay
$59.99 -
Hydropool Filter w/ Inner Core 4520030 (Pleatco PRC75)
Description: Pleatco Pure 75sq ft with Removable Core
Hydropool part #4520030
Pleatco part #PRC75
Note: This filter is interchangeable with Hydropool filter #4520008. However, filter #4520008 does not contain the inner core.
Hydropool model compatibility: See description below
$87.99 -
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$22.00 -
Open-Box | Jacuzzi Filter 2540-387
-
This is an open-box item, genuine, OEM product
-
Free from damages and defects that would consider it unusable or “used”
-
Inspected prior to being sold by our Hot Tub Things / Paradise Valley Spas staff
-
Final sale – unable to accommodate returns or exchanges
$20.50$41.00 -
-
Jacuzzi Filter Cartridge 2540-381J
- GENUINE | Enjoy the peace of mind that comes from Jacuzzi quality water filters
- EFFECTIVE | Woven filtration protects your water, your family, and your equipment from harmful dirt and particles
- DURABLE | The 2540-381J filter can withstand repeated washing and rinsing with an approved cartridge cleaner (sold separately), so you can get maximum life out of your purchase
- ECONOMICAL | Replace the filter regularly to protect the pumps and plumbing of your hot tub
$65.75 -
Jacuzzi HydroSoothe Pillow Assembly 2472-136
- Jacuzzi J-300 Hydrosoothe Pillow Assembly
- Jacuzzi J300 manufactured in 2020
- Pillow comes with the back fitting
- Part #2472-136
$48.49 -
Jacuzzi J-200 Pillow 2472-828
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Jacuzzi Part 2472-828 – this pillow also replaces part # 6455-457
-
Compatible – Fits All J-280 and J-270 hot tubs. See description for additional tubs
-
Soft and Comfortable – Restore your spa to its original look and comfort
-
No hardware required – Single plastic bolt in the back secures it to the existing mount in your tub
$29.99 -
-
Jacuzzi J-215/J-225 Pillow 2472-831
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
Jacuzzi J-300 2020+ Pillow 2472-135
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
$41.99 -
Jacuzzi J-400 Pillow 2472-007
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
$36.75