Shop
-
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
Sundance / Jacuzzi Pillow Attachment Screw 6570-231
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
$2.99 -
60-1260 | Bullfrog Snapcap Clip (2013-2015)
- Replacement clip for attaching the Snapcap & Headrest Assembly
- Fits A Series, R Series, and STIL spas 2013-2015.
$8.25 -
SpaGuard Calcium Hardness Increaser 16 oz
- Prevents corrosion of equipment
- Prevents degradation of spa surfaces
- 1 tbsp. per 100 gallons increases calcium hardness ~25 ppm
$9.15 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
SpaGuard pH Increaser (18 oz)
- Raises the pH
- Protects equipment from corrosion due to low pH
- Balances water for bather comfort
$12.99 -
Sundance Sunscents Aromatherapy Cartridges (2-pack)
- Used on Sundance Spas 880 & 980 Series hot tubs
- Installed onto the patented SilentAir Aromatherapy system (standard)
- Powerful SilentAir blower quietly sends 1000’s of soothing bubbles through multiple designated jets with just the touch of a button.
- SunScents are a wonderful way to add aromatherapy to your Sundance Hot Tub
- Will not make your spa water oily or foamy
$12.99 -
SpaGuard pH Decreaser (22 oz.)
- Lowers the pH
- Protects spa and equipment due to improper pH
- Prevents cloudy water due to high pH
- Balances water for bather comfort
$13.99 -
Jacuzzi J-400 Series Pillow Slider 2570-401
- Jacuzzi® J-400 Series pillow slider level model 2570-401.
- This J400 slider level is used with J-400 series pillows.
- These fit J-400 Collection Pillows part # 2472-820 or part # 2472-822.
$14.25 -
SpaGuard Water Clarifier – 1 Pint
- Helps clear cloudy water
- Does not affect pH
- Combines small particles into larger ones for easier filtration
$14.38 -
SpaGuard Anti Foam 16oz
- 16 oz bottle of SpaGuard Anti Foam
- Chlorine-free, compatible with chlorine, bromine, and minerals
- Fast-acting water treatment reduces foam instantly
- Does not interrupt your bathing session
$14.99 -
Bromine Spa Dispenser
- Adjustable feeder chamber controls the rate
- String tie to keep it close by for easy checking and filling
- This dispenser uses 1″ bromine or chlorine tablets.
- For use with spas/hot tubs and small pools.
$15.00 -
SpaGuard Total Alkalinity Increaser (2 lb)
- Eliminates “pH bounce” by balancing total alkalinity
- Helps to prevent equipment and surface corrosion and damage due to low pH
- 1 tbsp. per 100 gallons raises total alkalinity 25 ppm
$16.25 -
60-00085 | Bullfrog Hidden Snapcap Clip (2016-Present)
- Replacement clip for attaching the Snapcap & Headrest Assembly
- Fits A Series, R Series, and STIL spas 2016-present
$17.25 -
Life Spa Booster Seat in Black
- Designed for comfort, this booster seat is made of durable, chemical-resistant material
- The increased seat height elevates you closer to the spa jets or it may be used as back support
- Firmness and size can be adjusted by the amount of water used to fill it
- Easily filled with a standard garden hose
$17.50 -
Bullfrog Snapcap Clip (2005-2012) | 60-1073
- Model years used: 2005-2012
- OEM part #60-1073
$18.50 -
6455-482 | Sundance Pillow Chevron Gray Insert
- Used on 2001+ Sundance models with plastic screw fastener.
- Insert used with 2001–2008 880 Series Sundance Spas (see list)
- Original Sundance Spa Part
$18.99 -
Sundance Spas Microclean Throwaway Absorbtion Filter 6540-502
Original Replacement Filter For Sundance Spas Microclean I Filter. The spun-bound microfiber cartridge allows for ultra-fine hot tub water filtration.
- 8.5″ Diameter
- Should be replaced every 3-4 months
- Used on Sundance Spas 850 & 780 Series
- This is a disposable filter, do not use filter cleaner on this filter
$20.50 -
Natural Chemistry Spa Perfect®
- SMARTZyme technology reduces unwanted non-living organic contaminants
- contaminants as: body oils, cosmetics, suntan lotions, hair products, etc.
- Makes water soft and silky
- continually cleans spa filters to prolong filter cycles
$21.25 – $35.99 -
Sundance Pillow Insert 6455-472
- Sundance Spa Wrap Around Pillow Insert (6455-472)
- Pillow Insert Only
- Pillow Insert for Sundance Wrap Around Pillow 6472-962
$23.25 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
SpaGuard Spa Sentry 1 qt
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$24.99 -
Jacuzzi Pillow (back mount) 2455-105
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
FROG® @ease® Cartridge Holder for Sundance Spas
- Most Sundance Spas after 2010 can be upgraded to use Frog @Ease
- Spa Frog is the leading designer of mineral sanitizing systems
The @ease System for Sundance Spas is the manufacturer-recommended method of keeping your hot tub free of germs and algae. Upgrade your spa with ease. Sundance Spas prior to 2021 require a one-time purchase of this Frog @ease cartridge holder.
$25.99 -
FROG® @ease® Cartridge Holder for Jacuzzi Hot Tubs
- Most Jacuzzi hot tubs after 2010 can be upgraded to use Frog @Ease
- Spa Frog is the leading designer of mineral sanitizing systems
- The cartridge holder fits J-300, J-400, J-LX, and J-500 series tubs
- It is Jacuzzi Part number 6720-412
The @ease System for Jacuzzi hot tubs is the manufacturer-recommended method of keeping your hot tub free of germs and algae. Upgrade your spa with ease. Jacuzzi hot tubs prior to 2021 require a one-time purchase of this Frog cartridge holder.
$25.99 -
Jacuzzi Pillow (insert only) 2455-104
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
High Duty Wind Straps (Set of 2)
- Additional security to hold down your spa cover
- Adjustable length: 92″ to 136″ (230cm to 345cm) and 1.5″ (3.8cm) wide
- Fits spas from 6ft to 9ft (1.8m to 2.7m)
- Stainless screws included and plastic buckles (pinch) included | locking keys
$27.75
