Shop
-
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-302 | Screw: 8X1-5/8 PHD 305 S/S (Gray)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-394 | Screw: 8X1-5/8 PHD S/S (Mahogany)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-393 | Screw: 8X1-5/8 PHD S/S (Gray)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
6570-231 | Sundance® / Jacuzzi® Pillow Attachment Screw
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
$2.99 -
SpaGuard Calcium Increaser (12 oz)
- Prevents corrosion of equipment
- Prevents degradation of spa surfaces
- 1 tbsp. per 100 gallons increases calcium hardness ~25 ppm
$7.99 -
SpaGuard pH Increaser (18 oz)
- Raises the pH
- Protects equipment from corrosion due to low pH
- Balances water for bather comfort
$8.99 -
SpaGuard pH Decreaser (22 oz)
- Lowers the pH
- Protects spa and equipment due to improper pH
- Prevents cloudy water due to high pH
- Balances water for bather comfort
$9.99 -
6540-213 | Large Spa Filter Drain Cover
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
SpaGuard Water Clarifier (16 oz)
- Helps clear cloudy water
- Does not affect pH
- Combines small particles into larger ones for easier filtration
$12.99 -
SpaGuard Total Alkalinity Increaser (2 lb)
- Eliminates “pH bounce” by balancing total alkalinity
- Helps to prevent equipment and surface corrosion and damage due to low pH
- 1 tbsp. per 100 gallons raises total alkalinity 25 ppm
$12.99 -
SpaGuard® Rapid-Dissolve pH Decreaser Tabs (1.25 lb)
- Quickly decrease pH level of spa water
- Provide soaker comfort and protect spa and swim spa equipment
- 2 tabs per 250 gallons – 1000 liters as needed
- Lowers pH 0.1 – 0.2 units
$12.99 -
SpaGuard Anti Foam (16 oz)
- 16 oz bottle of SpaGuard Anti Foam
- Chlorine-free, compatible with chlorine, bromine, and minerals
- Fast-acting water treatment reduces foam instantly
- Does not interrupt your bathing session
$13.99 -
100002 | CoverMate Foam Grip
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Comes as a set of 1 (1 foam grip)
- OEM #100002
$15.00 -
SpaGuard® Rapid-Dissolve Alkalinity Increaser Tabs (1.25 lb)
- Control pH bounce by quickly raising total alkalinity
- Helps protect equipment from corrosion
- 2 tabs per 250 gallons – 1000 liters as needed
- Raises total alkalinity by 30 ppm
$15.99 -
100008 | CoverMate Towelmate
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Does not include mounting screws
- OEM #100008
$18.00 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
Natural Chemistry Spa Perfect® (1 L)
- SMARTZyme technology reduces unwanted non-living organic contaminants
- contaminants as: body oils, cosmetics, suntan lotions, hair products, etc.
- Makes water soft and silky
- continually cleans spa filters to prolong filter cycles
$21.25 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
SpaGuard® Rapid-Dissolve Shock Oxidizing Tabs (1.25 lb)
- Non-chlorine shock-oxidizer
- Quickly oxidizes non-living waste and contaminants**
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spas for 12+ weeks
$23.99 -
2540-389 | Jacuzzi ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
6570-398 | Jacuzzi® Mesh Skimmer Debri Bag w/11 Clip Holes
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
100150 | Safe-T Rail Foam Grip
- Compatible with Leisure Concepts Products
- Comes as a set of 1
- OEM #100150
- Length = 19.5 inches
$25.00 -
2455-105 | Jacuzzi J-300 Pillow (back mount)
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
SpaGuard Spa Sentry® (32 oz)
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$25.99 -
SpaGuard Natural Spa Enzyme (32 oz)
• Enzyme formulation breaks down oils naturally
• pH~3.0-4.5
• Reduces scum line build-up and odors
• Controls cloudy water
• Improves Filtration
• Reduces maintenance time
• Keeps spa clean longer$26.99 -
2455-104 | Jacuzzi J-300 Pillow (insert only)
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
6455-007 | jacuzzi® J-300 Collection (2002-2006)
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
SpaGuard Stain & Scale Control (32 oz)
- SpaGuard Spa Stain & Scale Control – 1 Quart
- Prevents scale formation and cloudy water due to high calcium levels
- Removes some scale buildup on spa surface
- Removes relatively fresh metal stains from spa surfaces
- Simply add this powerful liquid formula weekly to safeguard your spa or hot tub from these threats. Color of the liquid is natural brown
$27.99 -
SpaGuard Brominating Concentrate (2 lb)
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$27.99 -
SpaGuard Spa Shock-Oxidizer (Buffered Non-Chlorine) (35 oz)
-
- 35 oz bottle SpaGuard Spa Shock-Oxidizer
- Buffered, non-chlorine formula does not interfere with your balance water
- Compatible with chlorine, bromine, and minerals
- Use along with a chemical sanitizer to keep your hot tub clean and germ-free
$28.99 -
-
SpaGuard® Rapid-Dissolve Stain & Scale Tabs (1.25 lb)
- Controls metal-based staining & scaling
- Protects spa and swim spa equipment and surfaces
- Single-dose, 1” tab per 300 gallons – 1200 liters weekly
- Bottle treats average-sized spa for 12+ weeks
$28.99 -
DISCONTINUED | 60-1165 | Bullfrog Air Comfort Pillow (2002-2012)
- This pillow is now discontinued – Once inventory is depleted, the pillow will not be restocked.
- Air Comfort 10 1/8″ wide replacement spa pillow
- select model Bullfrog Spas made between 2009-2012
- Snaps into jet packs
- Replaced by part #60-1160
$29.89 -
SpaGuard Chlorinating Concentrate (2 lb)
- Fast-acting, quick-dissolving
- Easy to use, no pre-dissolving needed
- Acts as a sanitizer and an oxidizer; no need for two products
- Apply directly to water while the pump is running
$29.99 -
2472-831 | Jacuzzi® J215/J225™ Pillow
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-822 | Jacuzzi® J-400 Series Pillow (2006-2009)
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
2472-828 | Jacuzzi J-200 Pillow
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Compatible – Fits All J-280 and J-270 hot tubs. See description for additional tubs
-
Soft and Comfortable – Restore your spa to its original look and comfort
-
No hardware required – Single plastic bolt in the back secures it to the existing mount in your tub
$32.50 -