- Sort by price: low to high
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
Sundance / Jacuzzi Pillow Attachment Screw 6570-231
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
SpaGuard Calcium Hardness Increaser 16 oz
- Prevents corrosion of equipment
- Prevents degradation of spa surfaces
- 1 tbsp. per 100 gallons increases calcium hardness ~25 ppm
SpaGuard pH Increaser (18 oz)
- Raises the pH
- Protects equipment from corrosion due to low pH
- Balances water for bather comfort
SpaGuard pH Decreaser (22 oz.)
- Lowers the pH
- Protects spa and equipment due to improper pH
- Prevents cloudy water due to high pH
- Balances water for bather comfort
Jacuzzi J-400 Series Pillow Slider 2570-401
- Jacuzzi® J-400 Series pillow slider level model 2570-401.
- This J400 slider level is used with J-400 series pillows.
- These fit J-400 Collection Pillows part # 2472-820 or part # 2472-822.
SpaGuard Water Clarifier – 1 Pint
- Helps clear cloudy water
- Does not affect pH
- Combines small particles into larger ones for easier filtration
SpaGuard Anti Foam 16oz
- 16 oz bottle of SpaGuard Anti Foam
- Chlorine-free, compatible with chlorine, bromine, and minerals
- Fast-acting water treatment reduces foam instantly
- Does not interrupt your bathing session
SpaGuard Total Alkalinity Increaser (2 lb)
- Eliminates “pH bounce” by balancing total alkalinity
- Helps to prevent equipment and surface corrosion and damage due to low pH
- 1 tbsp. per 100 gallons raises total alkalinity 25 ppm
Jacuzzi Proclarity Depth Load Filter 6473-161
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-157 (All 2013+ models of J-400 series Jacuzzi hot tubs)
- Use with Jacuzzi Filter 6473-158 for 2012 models of J-480, J-470, and J-465
Natural Chemistry Spa Perfect®
$21.25 – $35.99
- SMARTZyme technology reduces unwanted non-living organic contaminants
- contaminants as: body oils, cosmetics, suntan lotions, hair products, etc.
- Makes water soft and silky
- continually cleans spa filters to prolong filter cycles
Natural Chemistry Spa Perfect®$21.25 – $35.99 Select options
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.$22.00
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
Jacuzzi Pillow (insert only) 2455-104
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
SpaGuard Spa Sentry 1 qt
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
Jacuzzi J-LX/J-LXL Pillow 6455-485
- Jacuzzi J-LX/J-LXL Pillow Replacement
FROG® @ease® Cartridge Holder for Jacuzzi Hot Tubs
- Most Jacuzzi hot tubs after 2010 can be upgraded to use Frog @Ease
- Spa Frog is the leading designer of mineral sanitizing systems
- The cartridge holder fits J-300, J-400, J-LX, and J-500 series tubs
- It is Jacuzzi Part number 6720-412
The @ease System for Jacuzzi hot tubs is the manufacturer-recommended method of keeping your hot tub free of germs and algae. Upgrade your spa with ease. Jacuzzi hot tubs prior to 2021 require a one-time purchase of this Frog cartridge holder.$25.99
Jacuzzi Pillow (back mount) 2455-105
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
SpaGuard Stain & Scale Control (1 qt)
- SpaGuard Spa Stain & Scale Control – 1 Quart
- Prevents scale formation and cloudy water due to high calcium levels
- Removes some scale buildup on spa surface
- Removes relatively fresh metal stains from spa surfaces
- Simply add this powerful liquid formula weekly to safeguard your spa or hot tub from these threats. Color of the liquid is natural brown
Jacuzzi J-500 Pillow 2472-005
- Fits 2015+ JACUZZI®® models J-585 & J-575
- Replaces old part #2455-266
- 4 Total pillows on spa
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
SpaGuard Spa Shock-Oxidizer 35oz
- 35 oz bottle SpaGuard Spa Shock-Oxidizer
- Buffered, non-chlorine formula does not interfere with your balance water
- Compatible with chlorine, bromine, and minerals
- Use along with a chemical sanitizer to keep your hot tub clean and germ-free
Jacuzzi J-400 Pillow 2472-822
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.