Shop
-
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-302 | Screw: 8X1-5/8 PHD 305 S/S (Gray)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-394 | Screw: 8X1-5/8 PHD S/S (Mahogany)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-393 | Screw: 8X1-5/8 PHD S/S (Gray)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
6570-231 | Sundance® / Jacuzzi® Pillow Attachment Screw
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
$2.99 -
6540-213 | Large Spa Filter Drain Cover
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
FROG® Test Strips (for Swimming Pools & Spas)
- Manufactured by King Technology
- Size: 50 test strips
- Measures Chlorine / Bromine levels, pH and Hardness
- Can be used with any Fresh Mineral Water products from FROG®
- Can be used with other non-FROG® sanitizing system
$13.50 -
FROG® Serene Bromine Cartridge (150g)
Bromine cartridges last between 2-4 weeks depending on volume of water, number of bathers and usage.
- Spa frog bromine cartridge
- Refill for use in either the spa frog floating system, or for users of the spa frog inline system
- Use with companion frog mineral cartridge
$14.75 -
FROG® @ease® Test Strips for Hot Tubs
Frog @ease SmartChlor Technology Test Strips easily test the chlorine level in hot tubs using the Frog @ease sanitizing system. Each strips tests for SmartChlor, Total Alkalinity, pH and Total Hardness. Results are ready in just 2 seconds.
$15.50 -
FROG Maintain® for Swim Spas
- non-chlorine shock that works in 15 minutes
- Shock only once a month
- includes: (1) 16 oz packet of Maintain shock
- Compatible: spa up to 3,000 gallons
$18.95 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
2540-389 | Jacuzzi ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
6570-398 | Jacuzzi® Mesh Skimmer Debri Bag w/11 Clip Holes
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
SilkBalance Clean Start – Plumbing Line Cleaner
- Fast, powerful, safe, and low foam results in 30 minutes or less
- Purges the plumbing system and hot tub accessories
- Eliminates slime and sludge in jets and plumbing lines
- Proprietary formula detoxes your spa but safe to use immediately after
- 1 botte / 1 dose
$24.99 -
2455-105 | Jacuzzi J-300 Pillow (back mount)
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
2455-104 | Jacuzzi J-300 Pillow (insert only)
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
6455-007 | jacuzzi® J-300 Collection (2002-2006)
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
2472-831 | Jacuzzi® J215/J225™ Pillow
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-822 | Jacuzzi® J-400 Series Pillow (2006-2009)
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
2472-828 | Jacuzzi J-200 Pillow
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Soft and Comfortable – Restore your spa to its original look and comfort
$32.50 -
-
6455-468 | Jacuzzi® J-200 Series Snap-In Pillow
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
6455-485 | Jacuzzi J-LX/J-LXL Pillow (2011+)
- Jacuzzi J-LX/J-LXL Pillow Replacement
- 2011+
- Snap-in
$34.50 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
6473-161J | Jacuzzi Proclarity Depth Load Filter
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-157 (All 2013+ models of J-400 series Jacuzzi hot tubs)
- Use with Jacuzzi Filter 6473-158 for 2012 models of J-480, J-470, and J-465
$34.95 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
FROG® Filter Mate® Mineral Sanitizer
- No assembly, easy installation – one prefilled stick easily fits into the filter, where it works for 4 months
- Filter Mate contains FROG Sanitizing Minerals, which work together with chlorine or bromine to kill bacteria 2 ways, giving you more peace of mind
- FROG Sanitizing Minerals lower chlorine or bromine use up to 50%* and help keep the water clean and crystal clear
- Turns ordinary hot tub water into Fresh Mineral Water, its Cleaner, Clearer, Softer and Easier to take care of.
$35.75 -
6472-859 | Jacuzzi® & Sundance® ClearRay Quartz Tube
- GENUINE CLEARRAY | This genuine ClearRAY tube is made by Sundance Spas, part # 6472-859
- GUARANTEED COMPATIBLE | Tube fits CLEARRAY XL bulbs in both Sundance Spas and Jacuzzi-brand hot tubs
- CRYSTAL CLEAR | The pure mineral quartz of this tube provides optimal light pass-through so you get maximum UV sanitation efficiency
- INSTALLATION KIT | Comes with latex glove (fingerprints can shorten system life) and complete instructions
- As of Summer 2019, an O-ring is not included with the replacement tube.
$35.99 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
FROG® Serene Mineral Cartridge
Each FROG Serene Mineral Cartridge last for a full 4 months before needing to be replaced.
- Refill for use in either the spa frog floating system, or for users of the spa frog inline system
- Use with companion frog bromine cartridge (yellow cartridge)
$36.95 -
2890-185 | Jacuzzi® ProClear™ Mineral Spa Sanitizer
- Exclusively designed to work in your Jacuzzi Hot Tub. Simply drops right into your filter
- Works with your existing filtration system
- Hassle-free maintenance
- Leaves water softer and clearer
- Controlled Release Technology (CRT) ensures optimal mineral levels and no staining
$40.50 -
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
- Hydrosoothe installation
$40.50 -
2472-005 | Jacuzzi J-500 Pillow
- Replaces old part #2455-266
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$40.50 -
2540-380 | 25 Sq. Ft. Filter Cartridge
- Genuine Jacuzzi Part, guaranteed quality and compatibility
- Compatible with JWB and Echo spas, 2001 and older hot tubs
- 25 square feet of filtration material for clean, clear water
$40.99$59.50 -
2472-826 | Jacuzzi J-300 Series Pillow Base and insert (2007+)
- Genuine Jacuzzi brand part
- Perfect match for your older J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 2455-104 insert
$42.50 -
2472-824 | Jacuzzi® J-300™ Pillow (Pillow Insert & Back Mount)
- Genuine Jacuzzi brand part
- Perfect match for your J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 6455-488 insert
$42.50 -
2540-384J | Jacuzzi® ProClear II Filter Cartridge
- GENUINE JACUZZI | Filter is made by the same company that made your hot tub, so you know it will work perfectly
- 25 SqFt AREA | The tight pleating exposes maximum surface area so the filter can hold more debris
- FOR J-400 HOT TUBS | This is a Jet Pump filter for J-460 and J-465 hot tubs only
$42.50 -
2472-007 | Jacuzzi J-400 pillow (J445/J435/J475/J485)
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
- Compatible with all current J400 models and J-445 & J-435 10/2017+, J-485 & J-475 2019+, All J-400 2020+
$42.50 -
2472-820 | Jacuzzi J-400 Pillow Assembly (2009+)
- Genuine Jacuzzi brand part
- Perfect match for your J-400 series hot tub
- Clear window for headrest lighting
The mounting hardware is not included. Contact your licensed Jacuzzi repair technician if you require new plastic mounting hardware.
$43.50 -
2540-387J | Jacuzzi Proclear II Filter
- GENUINE JACUZZI QUALITY | This filter is made by Jacuzzi, the same company that made your hot tub
- GUARANTEED COMPATIBILITY | Works with 2006–2012 J-465, J-470, and J-480 hot tubs. See description for more details
- SPECIALIZED FILTRATION | Designed by Jacuzzi specifically for J-400 series hot tub
$44.50