-
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$0.99 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$1.75 -
Sundance / Jacuzzi Pillow Attachment Screw 6570-231
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
$2.99 -
60-1260 | Bullfrog Snapcap Clip (2013-2015)
- Replacement clip for attaching the Snapcap & Headrest Assembly
- Fits A Series, R Series, and STIL spas 2013-2015.
$12.50 -
Sundance Sunscents Aromatherapy Cartridges (2-pack)
- Used on Sundance Spas 880 & 980 Series hot tubs
- Installed onto the patented SilentAir Aromatherapy system (standard)
- Powerful SilentAir blower quietly sends 1000’s of soothing bubbles through multiple designated jets with just the touch of a button.
- SunScents are a wonderful way to add aromatherapy to your Sundance Hot Tub
- Will not make your spa water oily or foamy
$12.99 -
Jacuzzi J-400 Series Pillow Slider 2570-401
- Jacuzzi® J-400 Series pillow slider level model 2570-401.
- This J400 slider level is used with J-400 series pillows.
- These fit J-400 Collection Pillows part # 2472-820 or part # 2472-822.
$14.25 -
60-00085 | Bullfrog Hidden Snapcap Clip (2016-Present)
- Replacement clip for attaching the Snapcap & Headrest Assembly
- Fits A Series, R Series, and STIL spas 2016-present
$17.25 -
Sundance Spas Microclean Throwaway Absorbtion Filter 6540-502
Original Replacement Filter For Sundance Spas Microclean I Filter. The spun-bound microfiber cartridge allows for ultra-fine hot tub water filtration.
- 8.5″ Diameter
- Should be replaced every 3-4 months
- Used on Sundance Spas 850 & 780 Series
- This is a disposable filter, do not use filter cleaner on this filter
$18.99 -
Jacuzzi Proclarity Depth Load Filter 6473-161
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-157 (All 2013+ models of J-400 series Jacuzzi hot tubs)
- Use with Jacuzzi Filter 6473-158 for 2012 models of J-480, J-470, and J-465
$18.99 -
Sundance Spas Pillow Chevron Gray Insert 6455-482
- Used on 2001+ Sundance models with plastic screw fastener.
- Insert used with 2001–2008 880 Series Sundance Spas (see list)
- Original Sundance Spa Part
$18.99 -
Natural Chemistry Spa Perfect®
- SMARTZyme technology reduces unwanted non-living organic contaminants
- contaminants as: body oils, cosmetics, suntan lotions, hair products, etc.
- Makes water soft and silky
- continually cleans spa filters to prolong filter cycles
$21.25 – $35.99 -
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$22.00 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
Jacuzzi Pillow (insert only) 2455-104
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$24.75 -
Jacuzzi J-LX/J-LXL Pillow 6455-485
- Jacuzzi J-LX/J-LXL Pillow Replacement
- 2011+
- Snap-in
$25.38 -
FROG® @ease® Cartridge Holder for Sundance Spas
- Most Sundance Spas after 2010 can be upgraded to use Frog @Ease
- Spa Frog is the leading designer of mineral sanitizing systems
The @ease System for Sundance Spas is the manufacturer-recommended method of keeping your hot tub free of germs and algae. Upgrade your spa with ease. Sundance Spas prior to 2021 require a one-time purchase of this Frog @ease cartridge holder.
$25.99 -
FROG® @ease® Cartridge Holder for Jacuzzi Hot Tubs
- Most Jacuzzi hot tubs after 2010 can be upgraded to use Frog @Ease
- Spa Frog is the leading designer of mineral sanitizing systems
- The cartridge holder fits J-300, J-400, J-LX, and J-500 series tubs
- It is Jacuzzi Part number 6720-412
The @ease System for Jacuzzi hot tubs is the manufacturer-recommended method of keeping your hot tub free of germs and algae. Upgrade your spa with ease. Jacuzzi hot tubs prior to 2021 require a one-time purchase of this Frog cartridge holder.
$25.99 -
Jacuzzi Pillow (back mount) 2455-105
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$26.25 -
Sundance Spas Pillow 6472-966
- Sundance Spas Replacement Pillow – 780 Series Spas 2007+
- Original Sundance Spa Parts
- Part #6455-469 (and
- 780 Series OEM Pillow, Ball & Socket Type, 2007+. Fits 2007+ Camden, Certa, Chelsee, HAMILTON; 2008+ Dover
$27.99 -
Jacuzzi J-500 Pillow 2472-005
- Fits 2015+ JACUZZI®® models J-585 & J-575
- Replaces old part #2455-266
- 4 Total pillows on spa
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$28.75 -
Sundance Spas MicroClean Filter Adapter 6540-503
This filter accessory allows you to attach Sundance Spas filters 6540-501 and 6540-502 (sold separately) to your spa. This is not a disposable part; it will stand up to repeated cleanings and be retained as you clean and replace filters.
Compatibility:2002–2005 850 and 850E spas2006–2012 780 Spas2011–2012 Select Spas$28.99 -
FROG® @ease Cartridge Holder for Bullfrog Spas
Keep your Bullfrog Spa clean, clear, fresh, and safe with the innovative mineral sanitizer system designed specifically for your hot tub!
The @Ease system for Bullfrog Spas is the manufacturer-recommended method of keeping your hot tub free of germs and algae. Upgrade your spa with ease. Bullfrog Spas prior to 2019 require a one-time purchase of this frog cartridge holder.$29.50 -
Jacuzzi J-400 Pillow 2472-822
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$29.50
