Shop
-
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
Sundance / Jacuzzi Pillow Attachment Screw 6570-231
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
$2.99 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
Jacuzzi J-400 Series Pillow Slider 2570-401
- Jacuzzi® J-400 Series pillow slider level model 2570-401.
- This J400 slider level is used with J-400 series pillows.
- These fit J-400 Collection Pillows part # 2472-820 or part # 2472-822.
$14.25 -
100002 | CoverMate Foam Grip
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Comes as a set of 1 (1 foam grip)
- OEM #100002
$15.00 -
100008 | CoverMate Towelmate
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Does not include mounting screws
- OEM #100008
$18.00 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
SilkBalance Clean Start – Plumbing Line Cleaner
- Fast, powerful, safe, and low foam results in 30 minutes or less
- Purges the plumbing system and hot tub accessories
- Eliminates slime and sludge in jets and plumbing lines
- Proprietary formula detoxes your spa but safe to use immediately after
- 1 botte / 1 dose
$24.99 -
100150 | Safe-T Rail Foam Grip
- Compatible with Leisure Concepts Products
- Comes as a set of 1
- OEM #100150
- Length = 19.5 inches
$25.00 -
Jacuzzi Pillow (back mount) 2455-105
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
FROG® @ease® Cartridge Holder for Jacuzzi Hot Tubs
- Most Jacuzzi hot tubs after 2010 can be upgraded to use Frog @Ease
- Spa Frog is the leading designer of mineral sanitizing systems
- The cartridge holder fits J-300, J-400, J-LX, and J-500 series tubs
- It is Jacuzzi Part number 6720-412
The @ease System for Jacuzzi hot tubs is the manufacturer-recommended method of keeping your hot tub free of germs and algae. Upgrade your spa with ease. Jacuzzi hot tubs prior to 2021 require a one-time purchase of this Frog cartridge holder.
$25.99 -
Jacuzzi Pillow (insert only) 2455-104
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
Jacuzzi J-215/J-225 Pillow 2472-831
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
Jacuzzi J-400 Pillow 2472-822
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
Jacuzzi J-200 Pillow 2472-828
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Compatible – Fits All J-280 and J-270 hot tubs. See description for additional tubs
-
Soft and Comfortable – Restore your spa to its original look and comfort
-
No hardware required – Single plastic bolt in the back secures it to the existing mount in your tub
$32.50 -
-
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Jacuzzi J-LX/J-LXL Pillow 6455-485
- Jacuzzi J-LX/J-LXL Pillow Replacement
- 2011+
- Snap-in
$34.50 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Jacuzzi Proclarity Depth Load Filter 6473-161
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-157 (All 2013+ models of J-400 series Jacuzzi hot tubs)
- Use with Jacuzzi Filter 6473-158 for 2012 models of J-480, J-470, and J-465
$34.95 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
Sundance / Jacuzzi Replacement Quartz Tube 6472-859
- GENUINE CLEARRAY | This genuine ClearRAY tube is made by Sundance Spas, part # 6472-859
- GUARANTEED COMPATIBLE | Tube fits CLEARRAY XL bulbs in both Sundance Spas and Jacuzzi-brand hot tubs
- CRYSTAL CLEAR | The pure mineral quartz of this tube provides optimal light pass-through so you get maximum UV sanitation efficiency
- INSTALLATION KIT | Comes with latex glove (fingerprints can shorten system life) and complete instructions
- As of Summer 2019, an O-ring is not included with the replacement tube.
$35.99 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
101510 | Compression Damped Non-locking Shock 75#
- Replacement compression damped non-locking shock – lift. 75 lb.
- OEM #101510from Leisure Concepts
- Replaces old part #100245
- To see if your lifter is compatible, visit https://leisureconcepts.com/installation-instructions/
$36.75 -
FC-2390 | Filbur Rainbow Dynamic 50 filter (compatible with 373045J & 6540-471)
Diameter: 4-15/16″
Length: 13-5/16″
Top: 2-1/8″ Open
Bottom: 2-1/8″ Open
Media: 50 SF
$37.00
