Shop
-
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$31.50 -
6455-465 | Sundance® Spas Wrap Around Pillow Without Insert
- Sundance® Spas Wrap Around Pillow
- Compatible with 2001-2008 spa model
- Does not come with the insert pillow (part #6455-472)
- Does not come with the mounting screws (part #6570-231)
$59.95 -
6541-060 | Short AquaTerrace Waterfall Cover
- Sundance® Spas Short AquaTerrace Waterfall Trough
- OEM part #6540-060
- Sundance Spas only
- Compatibility below
$34.75 -
FROG® Filter Mate® Mineral Sanitizer
- No assembly, easy installation – one prefilled stick easily fits into the filter, where it works for 4 months
- Filter Mate contains FROG Sanitizing Minerals, which work together with chlorine or bromine to kill bacteria 2 ways, giving you more peace of mind
- FROG Sanitizing Minerals lower chlorine or bromine use up to 50%* and help keep the water clean and crystal clear
- Turns ordinary hot tub water into Fresh Mineral Water, its Cleaner, Clearer, Softer and Easier to take care of.
$35.75 -
FROG® Jump Start® (12/pack)
- Accompanies the FROG Serene and Frog @ease Sanitizing Systems or Frog Serene and Frog @ease In-Line Systems
- Helps the chlorine dissolve faster
- Use FROG Jump Start after balancing the water
- Use before using your FROG Sanitizing System
- One packet works in spas up to 500 gallons
$61.75 -
FROG® Test Strips (for Swimming Pools & Spas)
- Manufactured by King Technology
- Size: 50 test strips
- Measures Chlorine / Bromine levels, pH and Hardness
- Can be used with any Fresh Mineral Water products from FROG®
- Can be used with other non-FROG® sanitizing system
$13.50 -
High Duty Wind Straps (Set of 2)
- Additional security to hold down your spa cover
- Adjustable length: 92″ to 136″ (230cm to 345cm) and 1.5″ (3.8cm) wide
- Fits spas from 6ft to 9ft (1.8m to 2.7m)
- Stainless screws included and plastic buckles (pinch) included | locking keys
$27.75 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
SpaGuard Enhanced Shock 6 lb
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$53.99 -
SpaGuard Spa Sentry 1 qt
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$24.99 -
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10 -
UltraLift Foam Grip
- Original factory replacement Ultralift foam grip
- Easy to remove and easy to replace
- Standard UltraLift lifter systems utilize quantity=2
- OEM #L831
$14.50 -
-
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Bromine Spa Dispenser
- Adjustable feeder chamber controls the rate
- String tie to keep it close by for easy checking and filling
- This dispenser uses 1″ bromine or chlorine tablets.
- For use with spas/hot tubs and small pools.
$15.00 -
Cover Locks Center-Release Buckles (set of 4)
- Center or push-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
- Jacuzzi / Sundance part #6475-004
$20.75 -
Cover Locks Side-Release Buckles (set of 4)
- Side or pinch-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
$20.75 -
Extenda Spa-Skim
- Designed and packaged specifically for spas and hot tubs.
- Comes complete with its own 3ft -5ft telescopic pole.
$29.75 -
Floating Duck Toy
- These cute ducks are sure to be a hit with any spa lovers of all ages.
- Make bath and spa time, fun!
- Randomly picked duck each time!
- Collect the entire family!
$4.00 -
Great Start Pre-filter
- Attaches to the end of any garden hose.
- Extends filter life.
- Removes solids from the water.
- Reduces hard mineral deposits.
- Easier to balance chemicals from the start.
$21.50 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$53.50 -
Pool & Spa Floating Thermometers
- Tether included
- Shows degrees in both Fahrenheit and Centigrade
- Non-toxic liquid
$18.50 -
Pool FROG® Mineral Reservoir Series 6100
- The Pool FROG system creates Fresh Mineral Water®∞ that kills bacteria 2 ways
- FROG minerals and a small amount of chlorine
- Reduces chlorine use up to 50%
- Requires no daily dosing, eliminates smelly chlorine odors and invites loads of fun
$112.95 -
Replacement Key & Screw pack for Cover Buckles
Manufacturer: Core Covers & Essentials
Components: 4 generic keys / 12 mounting screws
Compatibility: Center-Release buckles / Side-Release buckles / M-Series buckles
$50.00 -
Sundance (Sweetwater) Pillow 6472-968
- 472-968 formerly 6455-455, Sundance Pillow, 2005+ 780 Speaker Pillow
- Updated Pillows have Sundance Spas logo – some remaining inventory may have the Sweetwater logo.
- Does not include the Bracket Mount. Use with 6455-500, Pillow Mounting Bracket.
$38.50 -
Sundance / Jacuzzi Flow Switch 6560-860
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
Sundance 680 Series 2003+ 6472-970
- Sundance 680 Series Spas Replacement Pillow
- Ball socket, contoured fit over spa lip, classic dimple massage texture, Sundance logo
- Replaces 6455-474
$35.50
