-
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$29.99 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
SpaGuard Enhanced Shock 6 lb
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$53.99 -
SpaGuard Spa Sentry 1 qt
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$24.99 -
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$0.99 -
UltraLift Foam Grip
- Original factory replacement Ultralift foam grip
- Easy to remove and easy to replace
- Standard UltraLift lifter systems utilize quantity=2
- OEM #L831
$13.50 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Bromine & Chlorine Tablet Feeder Floater Dispenser
- Dispense chlorine and bromine in the right amount
- No need for making daily doses
- Calibrated settings with lock ring
$15.50 -
Cover Locks Center-Release Buckles (set of 4)
- Center or push-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
- Jacuzzi / Sundance part #6475-004
$15.75 -
Cover Locks Side-Release Buckles (set of 4)
- Side or pinch-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
$15.75 -
Extenda Spa-Skim
- Designed and packaged specifically for spas and hot tubs.
- Comes complete with its own 3ft -5ft telescopic pole.
$29.75 -
Floating Duck Toy
- These cute ducks are sure to be a hit with any spa lovers of all ages.
- Make bath and spa time, fun!
- Randomly picked duck each time!
- Collect the entire family!
$4.00 -
FROG® @ease® for Jacuzzi Hot Tubs Upgrade Bundle
Time to finally upgrade your Jacuzzi Hot Tub with the FROG® @ease® system!
Bundle includes:
$82.95 -
Great Start Pre-filter
- Attaches to the end of any garden hose.
- Extends filter life.
- Removes solids from the water.
- Reduces hard mineral deposits.
- Easier to balance chemicals from the start.
$20.50 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$53.50 -
Pool & Spa Floating Thermometers
- Tether included
- Shows degrees in both Fahrenheit and Centigrade
- Non-toxic liquid
$18.50 -
Replacement Key & Screw pack for Cover Buckles
Manufacturer: Core Covers & Essentials
Components: 4 generic keys / 12 mounting screws
Compatibility: Center-Release buckles / Side-Release buckles / M-Series buckles
$0.99 -
Sundance / Jacuzzi Flow Switch 6560-860
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$48.75 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$1.75 -
Tub Scrubber
- Easily cleans dirt and other debris from spa surfaces.
- May be used on acrylic or vinyl.
- Unique pad design cleans textured surfaces.
$14.25 -
ULTRA Cleaning Glove
- Features a lightly abrasive open-hand surface
- Bonded to a durable, waterproof latex glove
- Provides the user a large scrubbing surface to remove scum, slim, and grime
- Ideally used on fiberglass, acrylic, vinyl, and tile
$11.50 -
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$22.00
