Shop
-
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$31.50 -
High Duty Wind Straps (Set of 2)
- Additional security to hold down your spa cover
- Adjustable length: 92″ to 136″ (230cm to 345cm) and 1.5″ (3.8cm) wide
- Fits spas from 6ft to 9ft (1.8m to 2.7m)
- Stainless screws included and plastic buckles (pinch) included | locking keys
$27.75 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$7.50 -
SpaGuard Enhanced Shock 6 lb
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$53.99 -
SpaGuard Spa Sentry 1 qt
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$24.99 -
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10 -
UltraLift Foam Grip
- Original factory replacement Ultralift foam grip
- Easy to remove and easy to replace
- Standard UltraLift lifter systems utilize quantity=2
- OEM #L831
$14.50 -
-
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Bromine Spa Dispenser
- Adjustable feeder chamber controls the rate
- String tie to keep it close by for easy checking and filling
- This dispenser uses 1″ bromine or chlorine tablets.
- For use with spas/hot tubs and small pools.
$15.00 -
Cover Locks Center-Release Buckles (set of 4)
- Center or push-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
- Jacuzzi / Sundance part #6475-004
$20.75 -
Cover Locks Side-Release Buckles (set of 4)
- Side or pinch-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
$20.75 -
Extenda Spa-Skim
- Designed and packaged specifically for spas and hot tubs.
- Comes complete with its own 3ft -5ft telescopic pole.
$29.75 -
Floating Duck Toy
- These cute ducks are sure to be a hit with any spa lovers of all ages.
- Make bath and spa time, fun!
- Randomly picked duck each time!
- Collect the entire family!
$4.00 -
Great Start Pre-filter
- Attaches to the end of any garden hose.
- Extends filter life.
- Removes solids from the water.
- Reduces hard mineral deposits.
- Easier to balance chemicals from the start.
$21.50 -
Hot Tub Things 282 Microban® Filter 2-pack (compatible with Bullfrog Spas® 10-00282 | Wellspring 282)
- Newest filter addition to our Hot Tub Things family!
- Comparable to the Wellspring 282 filter for Bullfrog Spas®
- 2 Premium high-quality filter cartridges | Easy to Clean Microban Pleats | Powerful & Efficient Performance
- Includes two 282 filters per package
- Fits A Series, R Series, and X Series spas (2018 to present)
- A Series, R Series | 2013-2017 | you will need to purchase a Filter Cage Core Assembly (part #10-00417)
- Superior replacement to Wellspring 282, Unicel 8CH-950, Filbur FC-0536, Pleatco PBF50
$79.50 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$53.50 -
Pool & Spa Floating Thermometers
- Tether included
- Shows degrees in both Fahrenheit and Centigrade
- Non-toxic liquid
$18.50 -
Replacement Key & Screw pack for Cover Buckles
Manufacturer: Core Covers & Essentials
Components: 4 generic keys / 12 mounting screws
Compatibility: Center-Release buckles / Side-Release buckles / M-Series buckles
$0.99 -
Sundance / Jacuzzi Flow Switch 6560-860
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$1.75 -
Tub Scrubber
- Easily cleans dirt and other debris from spa surfaces.
- May be used on acrylic or vinyl.
- Unique pad design cleans textured surfaces.
$14.25 -
ULTRA Cleaning Glove
- Features a lightly abrasive open-hand surface
- Bonded to a durable, waterproof latex glove
- Provides the user a large scrubbing surface to remove scum, slim, and grime
- Ideally used on fiberglass, acrylic, vinyl, and tile
$11.50 -
Hot Tub Things FROG® @ease® Starter Kit for Bullfrog Spas
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$92.50 -
Hot Tub Things Filter (compatible with Sundance® 6473-164)
- Replacement for Sundance Spas Microclean Inner Filter 6473-164
- Inner Filter is used on Sundance Spas 880 Series and 850 Series
- Inner Filter used with 6473-165 Outer Filter
- 100% compatible with Sundance Spa Parts and Filters
- Height: 18.74″ Diameter: 5.63″
$32.99 -
Hot Tub Things Filter (compatible with Jacuzzi® 6000-383)
- FULLY COMPATIBLE | The replacement filter fits perfectly in most modern J-300 series hot tubs, so you can purify your residential hot tub while saving money over name-brand Jacuzzi filters
- SUPERIOR FILTRATION | The pleated filtration fabric exposes the maximum surface area (60 sq ft) to your water flow
- SUITABLE FOR ALL CHEMISTRIES | The filter is compatible with bromine, chlorine, UV-ray, and the ProClear mineral sanitizer (sold separately)
$45.50 -
Hot Tub Things Filter (compatible with Sundance® 6473-165)
Please Note: This is an outer filter only. Doesn’t include Hot Tub Things 6473-164 inner filter cartridge
- This is the OUTER FILTER ONLY. Doesn’t include Hot Tub Things 6473-164 inner filter cartridge. Again this doesn’t include the inner filter cartridge. You’ll have to buy the inner cartridge as well for a proper fitting in the spa.
$55.99
