Shop
-
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
6541-853J | ProClassic™ J-200™ Filter (2023+)
- Performance and fit qualified to Jacuzzi factory standards
- Genuine replacement filter for Jacuzzi 2023+ J-200 Models; J-285, J-275, J-245, J-235, J-225 and J-215
- Rinseable filter can be used for up to 18 months (sold separately)
- Use with 2-in-1 Frog @Ease SmartChlor & Mineral Cartridge Holder & exclusive Jacuzzi cartridges (purchased separately)
- Use of non Jacuzzi branded parts can adversely affect the quality of your spa experience. Damage to the hot tub due to unauthorized parts and accessories may void the warranty
$69.95 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
FC-2390 | Filbur Rainbow Dynamic 50 filter (compatible with 373045J & 6540-471)
Diameter: 4-15/16″
Length: 13-5/16″
Top: 2-1/8″ Open
Bottom: 2-1/8″ Open
Media: 50 SF
$37.00 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
SpaGuard Brominating Concentrate 2 lb
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$27.99 -
SpaGuard Brominating Concentrate 6 lb
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$77.99 -
SpaGuard Enhanced Shock 6 lb
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$53.99 -
SpaGuard Spa Sentry 1 qt
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$24.99 -
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
Sundance / Jacuzzi Flow Switch 6560-860
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
Jacuzzi Filter Cartridge 2540-381J
- GENUINE | Enjoy the peace of mind that comes from Jacuzzi quality water filters
- EFFECTIVE | Woven filtration protects your water, your family, and your equipment from harmful dirt and particles
- DURABLE | The 2540-381J filter can withstand repeated washing and rinsing with an approved cartridge cleaner (sold separately), so you can get maximum life out of your purchase
- ECONOMICAL | Replace the filter regularly to protect the pumps and plumbing of your hot tub
$68.50 -
2472-136 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Jacuzzi J-300 Hydrosoothe Pillow Assembly
- Jacuzzi J300 manufactured in 2020
- Pillow comes with the back fitting
- Part #2472-136
- Hydrosoothe installation
$53.50 -
Jacuzzi J-200 Pillow 2472-828
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Compatible – Fits All J-280 and J-270 hot tubs. See description for additional tubs
-
Soft and Comfortable – Restore your spa to its original look and comfort
-
No hardware required – Single plastic bolt in the back secures it to the existing mount in your tub
$32.50 -
-
Jacuzzi J-215/J-225 Pillow 2472-831
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
- Hydrosoothe installation
$40.50 -
Jacuzzi J-400 Pillow 2472-007
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
$42.50 -
Jacuzzi J-400 Pillow 2472-820
- Genuine Jacuzzi brand part
- Perfect match for your J-400 series hot tub
- Clear window for headrest lighting
The mounting hardware is not included. Contact your licensed Jacuzzi repair technician if you require new plastic mounting hardware.
$43.50 -
Jacuzzi J-400 Pillow 2472-822
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
Jacuzzi J-400 Series Pillow Slider 2570-401
- Jacuzzi® J-400 Series pillow slider level model 2570-401.
- This J400 slider level is used with J-400 series pillows.
- These fit J-400 Collection Pillows part # 2472-820 or part # 2472-822.
$14.25 -
Jacuzzi J-500 Pillow 2472-005
- Fits 2015+ JACUZZI®® models J-585 & J-575
- Replaces old part #2455-266
- 4 Total pillows on spa
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$40.50
