Shop
-
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$31.50 -
High Duty Wind Straps (Set of 2)
- Additional security to hold down your spa cover
- Adjustable length: 92″ to 136″ (230cm to 345cm) and 1.5″ (3.8cm) wide
- Fits spas from 6ft to 9ft (1.8m to 2.7m)
- Stainless screws included and plastic buckles (pinch) included | locking keys
$27.75 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Bromine Spa Dispenser
- Adjustable feeder chamber controls the rate
- String tie to keep it close by for easy checking and filling
- This dispenser uses 1″ bromine or chlorine tablets.
- For use with spas/hot tubs and small pools.
$15.00 -
Extenda Spa-Skim
- Designed and packaged specifically for spas and hot tubs.
- Comes complete with its own 3ft -5ft telescopic pole.
$29.75 -
Hot Tub Things 282 Microban® Filter 2-pack (compatible with Bullfrog Spas® 10-00282 | Wellspring 282)
- Newest filter addition to our Hot Tub Things family!
- Comparable to the Wellspring 282 filter for Bullfrog Spas®
- 2 Premium high-quality filter cartridges | Easy to Clean Microban Pleats | Powerful & Efficient Performance
- Includes two 282 filters per package
- Fits A Series, R Series, and X Series spas (2018 to present)
- A Series, R Series | 2013-2017 | you will need to purchase a Filter Cage Core Assembly (part #10-00417)
- Superior replacement to Wellspring 282, Unicel 8CH-950, Filbur FC-0536, Pleatco PBF50
$79.50 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$53.50 -
Sundance / Jacuzzi Flow Switch 6560-860
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
303 Aerospace Protectant
- For vinyl, rubber, and plastic
- Protects and preserves outdoor furnishings from moisture and UV damage
- Prevents fading and cracking
- Repels dust and lint for easier cleaning
- invented and made in USA
$13.21 – $65.45 -
303 Marine Fabric Guard (16oz Spray)
- Restores lost water and stain repellency to factory new levels
- Provides strong resistance against soiling
- Protects against water-based and oil-based stains
- Does not alter fabric color, feel, flammability or breathability
- Safe for the synthetic or natural fibers
$28.25 -
303 Multi-Surface Cleaner (16oz Spray)
-
303 Multi-Surface Cleaner is safe to use on a variety of surfaces, such as:
- Fabrics: 303 Multi-Surface Cleaner works on all water-safe fabrics and designed to clean even the most delicate fabrics
- Stainless Steel and Chrome: After a family outing, clean up food and drink marks from your boat’s interior and galley.
- Vinyl, Rubber and Plastics: Use on your boat or spa cover to remove dirt or water marks, perfect before sealing with 303 Aerospace Protectant.
- Metal, Aluminum, and Wicker: Take extra care of your furniture. 303 Multi-Surface Cleaner unique formula will rinse residue free.
$18.50 -
-
Hot Tub Things FROG® @ease® Starter Kit for Bullfrog Spas
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$92.50 -
Hot Tub Things Filter (compatible with Sundance® 6473-164)
- Replacement for Sundance Spas Microclean Inner Filter 6473-164
- Inner Filter is used on Sundance Spas 880 Series and 850 Series
- Inner Filter used with 6473-165 Outer Filter
- 100% compatible with Sundance Spa Parts and Filters
- Height: 18.74″ Diameter: 5.63″
$35.50 -
Hot Tub Things Filter (compatible with Jacuzzi® 6000-383)
- FULLY COMPATIBLE | The replacement filter fits perfectly in most modern J-300 series hot tubs, so you can purify your residential hot tub while saving money over name-brand Jacuzzi filters
- SUPERIOR FILTRATION | The pleated filtration fabric exposes the maximum surface area (60 sq ft) to your water flow
- SUITABLE FOR ALL CHEMISTRIES | The filter is compatible with bromine, chlorine, UV-ray, and the ProClear mineral sanitizer (sold separately)
$45.50 -
Hot Tub Things Filter (compatible with Sundance® 6473-165)
Please Note: This is an outer filter only. Doesn’t include Hot Tub Things 6473-164 inner filter cartridge
- This is the OUTER FILTER ONLY. Doesn’t include Hot Tub Things 6473-164 inner filter cartridge. Again this doesn’t include the inner filter cartridge. You’ll have to buy the inner cartridge as well for a proper fitting in the spa.
$55.99 -
Hot Tub Things Filter (compatible with Sundance® 6540-488)
- PURE PEACE OF MIND | Clean water makes for a better, more relaxing soak.
- LOW MAINTENANCE
- COMPLETE COMPATABILITY | installs easily and performs just as well as the name brand Sundance Filter.
- ECO- FRIENDLY CHOICE
- FOCUSED ON COMFORT | Hot Tub Things has provided spa services and hot tub supplies for over 20 years. Let us help you take care of your backyard oasis.
$67.50 -
Hot Tub Things Filter (compatible with Sundance® 6540-501)
Please Note: This is the pleated portion. 14″ tall, 8.5″ in diameter. Most Sundance Spas hot tubs that use this filter will also need the disposable spun-polymer filter “doughnut,” part 6540-502.
- FULLY COMPATIBLE | The replacement filter fits perfectly in Sundance Select series hot tubs, so you can purify your residential hot tub while saving money over name-brand Sundance filters
- SUPERIOR FILTRATION | The pleated filtration fabric exposes the maximum surface area to your water flow
- SUITABLE FOR ALL CHEMISTRIES | The filter is compatible with bromine, chlorine, UV-ray, and the SunPurity mineral sanitizer (sold separately)
$47.50 -
Hot Tub Things Filter (compatible with Sundance® 6540-502)
Please Note: This is the disposable, spun-polymer filter. It is “doughnut” shaped. 5″ tall, 7.75″ in diameter. Most Sundance Spas hot tubs that use this filter will also need the pleated filter cartridge HTT-6540-501 or comparable Sundance Filter.
- SINGLE PACK | Save money and resources. lasts up to 6 months
- FULLY COMPATIBLE | The replacement filter fits perfectly in Sundance Select series hot tubs, so you can purify your residential hot tub while saving money over name-brand Sundance filters
- SUPERIOR FILTRATION | The blown polymer strands in this filter nest tightly to screen out even microscopic-sized particles
- SUITABLE FOR ALL CHEMISTRIES | The filter is compatible with bromine, chlorine, UV-ray, and the SunPurity mineral sanitizer (sold separately)
$17.50 -
Jacuzzi 2540-389 ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
Jacuzzi Filter Cartridge 2540-381J
- GENUINE | Enjoy the peace of mind that comes from Jacuzzi quality water filters
- EFFECTIVE | Woven filtration protects your water, your family, and your equipment from harmful dirt and particles
- DURABLE | The 2540-381J filter can withstand repeated washing and rinsing with an approved cartridge cleaner (sold separately), so you can get maximum life out of your purchase
- ECONOMICAL | Replace the filter regularly to protect the pumps and plumbing of your hot tub
$68.50 -
Jacuzzi HydroSoothe Pillow Assembly 2472-136
- Jacuzzi J-300 Hydrosoothe Pillow Assembly
- Jacuzzi J300 manufactured in 2020
- Pillow comes with the back fitting
- Part #2472-136
$53.50 -
Jacuzzi J-200 Pillow 2472-828
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Compatible – Fits All J-280 and J-270 hot tubs. See description for additional tubs
-
Soft and Comfortable – Restore your spa to its original look and comfort
-
No hardware required – Single plastic bolt in the back secures it to the existing mount in your tub
$32.50 -
-
Jacuzzi J-215/J-225 Pillow 2472-831
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
Jacuzzi J-300 2020+ Pillow 2472-135
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
$40.50
