Shop
-
2472-014 | J300™ HYDROSOOTHE™ Massage Pillow (Front-Removable)
- Pillow: Massage, Front-removable, J-300 2020+
- OEM p/n 2472-014
- Pillow assembly consists of foam pillow (6455-036), inner ring (6541-427) inserted into pillow, and outer ring (6541-428) attached to back of inner ring.
- CAUTION: The original HYDROSOOTHE™ pillows were NOT able to be removed from the front of the spa. You will need to access the nuts at the back of the spa shell BEFORE pulling the pillow from the front of the shell.
- Installation Instructions
$72.95 -
6455-007 | jacuzzi® J-300 Collection (2002-2006)
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6540-213 | Large Spa Filter Drain Cover
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
6541-799 | ProClassic™ Filter Core & Cap
- New for the J200 Series 2023+
- OEM 6541-799
- Does not come with filter – sold separately
$34.95 -
6541-853J | ProClassic™ J-200™ Filter (2023+)
- Performance and fit qualified to Jacuzzi factory standards
- Genuine replacement filter for Jacuzzi 2023+ J-200 Models; J-285, J-275, J-245, J-235, J-225 and J-215
- Rinseable filter can be used for up to 18 months (sold separately)
- Use with 2-in-1 Frog @Ease SmartChlor & Mineral Cartridge Holder & exclusive Jacuzzi cartridges (purchased separately)
- Use of non Jacuzzi branded parts can adversely affect the quality of your spa experience. Damage to the hot tub due to unauthorized parts and accessories may void the warranty
$69.95 -
6570-302 | Screw: 8X1-5/8 PHD 305 S/S (Gray)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-303 | Screw: 8X1-5/8 PHD 305 S/S (Mahogany)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-309 | Screw: 8X1-5/8 PHD 305 S/S (Teak)
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
$0.95 -
6570-393 | Screw: 8X1-5/8 PHD S/S (Gray)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-394 | Screw: 8X1-5/8 PHD S/S (Mahogany)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.17 -
6570-398 | Jacuzzi® Mesh Skimmer Debri Bag w/11 Clip Holes
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
FC-2390 | Filbur Rainbow Dynamic 50 filter (compatible with 373045J & 6540-471)
Diameter: 4-15/16″
Length: 13-5/16″
Top: 2-1/8″ Open
Bottom: 2-1/8″ Open
Media: 50 SF
$37.00 -
FROG @ease 2-in-1 Water Care™ Floating Sanitizing System
- Sold exclusively at Jacuzzi® Group Retailers and Locations.
- Each box comes with 1x FROG Sanitizing Minerals™ and 1x SmartChlor
- Compatible with the 2-in-1, Jacuzzi® (p/n 6720-412), or Sundance® Spas (p/n 6473-315)
$56.95 -
FROG @ease 2-in-1 Water Care™ Floating SmartChlor Cartridge (3-Pack)
- Sold exclusively at Jacuzzi® Group Retailers and Locations.
- Each box comes with 3 SmartChlor Cartridges (silver cartridge)
- Compatible with the 2-in-1, Jacuzzi® (p/n 6720-412), or Sundance® Spas (p/n 6473-315)
$53.95 -
SilkBalance Clean Start – Plumbing Line Cleaner
- Fast, powerful, safe, and low foam results in 30 minutes or less
- Purges the plumbing system and hot tub accessories
- Eliminates slime and sludge in jets and plumbing lines
- Proprietary formula detoxes your spa but safe to use immediately after
- 1 botte / 1 dose
$24.99 -
SilkBalance Gems Water Care (4 month supply)
- Same great formula in a dissoluble gem form
- Gems dissolve in 20 seconds (when placed in a filter compartment or water stream
- Treatment: 1 Gem a Week (results may vary)
- Results: Silky Soft Skin, pH and Alkalinity balanced, no odors
$179.99 -
SilkBalance Shock Gems
- Non-chlorine MPS shock (single-dose)
- Eliminates odors and reduces organic contaminants
- Organic contaminant examples: boil oil, suntan lotion, etc.
- SilkBalance destroys contaminants thru oxidization
- 1 Shock Gem after spa use (2 people) or 2 Shock Gems after spa use (3+ people)
$59.99 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Cover Locks Center-Release Buckles (set of 4)
- Center or push-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
- Jacuzzi / Sundance part #6475-004
$20.95 -
Cover Locks Side-Release Buckles (set of 4)
- Side or pinch-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
$15.75$20.95 -
Floating Duck Toy
- These cute ducks are sure to be a hit with any spa lovers of all ages.
- Make bath and spa time, fun!
- Randomly picked duck each time!
- Collect the entire family!
$4.00 -
Great Start Pre-filter
- Attaches to the end of any garden hose.
- Extends filter life.
- Removes solids from the water.
- Reduces hard mineral deposits.
- Easier to balance chemicals from the start.
$21.50 -
6455-468 | Jacuzzi® J-200 Series Snap-In Pillow
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Replacement Key & Screw pack for Cover Buckles
Manufacturer: Core Covers & Essentials
Components: 4 generic keys / 12 mounting screws
Compatibility: Center-Release buckles / Side-Release buckles / M-Series buckles
$2.50 -
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50 -
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50 -
Cleaning Tub Scrubber
- Easily cleans dirt and other debris from spa surfaces.
- May be used on acrylic or vinyl.
- Unique pad design cleans textured surfaces.
$13.99 -
ULTRA Cleaning Glove
- Features a lightly abrasive open-hand surface
- Bonded to a durable, waterproof latex glove
- Provides the user a large scrubbing surface to remove scum, slim, and grime
- Ideally used on fiberglass, acrylic, vinyl, and tile
$11.50 -
2540-389 | Jacuzzi ProPolish Filter Bag
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
This official Jacuzzi replacement filter bag is only for hot tubs in the J-400 series, made between 2006–2012.
- 2009–2012 J-480, J-470, J-465 hot tubs (works alongside filter 2540-387J, sold separately)
- 2009–2012 J-460 model hot tubs (works alongside filter 2540-384, sold separately)
- 2006–2008 J-480, J-470, J-465 hot tubs (works alongside filter 2540-383J, sold separately)
- If you have a J-495, J-425, or J-415, this filter bag is not for you.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer’s warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
$24.50 -
2540-381J | Jacuzzi® J-200™ 95 sq. ft. Filter
- GENUINE | Enjoy the peace of mind that comes from Jacuzzi quality water filters
- EFFECTIVE | Woven filtration protects your water, your family, and your equipment from harmful dirt and particles
- DURABLE | The 2540-381J filter can withstand repeated washing and rinsing with an approved cartridge cleaner (sold separately), so you can get maximum life out of your purchase
- ECONOMICAL | Replace the filter regularly to protect the pumps and plumbing of your hot tub
$68.50 -
2472-136 | Jacuzzi J300™ HYDROSOOTHE™ Massage Pillow
- Jacuzzi J-300 Hydrosoothe Massage Pillow Complete Assembluy
- Jacuzzi J300 manufactured in 2020
- Hydrosoothe installation
- Contains pillow and following items:
- A. 6541-336, Inner Ring: Pillow, Massage, J-300 2020
- B. 6541-361, Outer Ring: Pillow, Massage, J-300 2020
- C. 6541-403, Bushing: Pillow, J-300 2020 (2 Req)
- D. 6540-547, Nut: .5-13 Nylon Wing (2 Req)
$53.50 -
2472-828 | Jacuzzi J-200 Pillow
-
Genuine Jacuzzi Quality – from the same company that made your hot tub
-
Replaces part # 6455-457
-
Compatible – Fits All J-280 and J-270 hot tubs. See description for additional tubs
-
Soft and Comfortable – Restore your spa to its original look and comfort
-
No hardware required – Single plastic bolt in the back secures it to the existing mount in your tub
$32.50 -
-
2472-831 | Jacuzzi® J215/J225™ Pillow
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
$30.25 -
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
- Genuine Jacuzzi brand part
- Perfect match for your new J-300 series hot tub
- Dark grey textured finish
- Soft and luxurious
- Hydrosoothe installation
$40.50 -
2472-007 | Jacuzzi J-400 pillow (J445/J435/J475/J485)
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
- Compatible with all current J400 models and J-445 & J-435 10/2017+, J-485 & J-475 2019+, All J-400 2020+
$42.50 -
2472-820 | Jacuzzi J-400 Pillow Assembly (2009+)
- Genuine Jacuzzi brand part
- Perfect match for your J-400 series hot tub
- Clear window for headrest lighting
The mounting hardware is not included. Contact your licensed Jacuzzi repair technician if you require new plastic mounting hardware.
$43.50 -
2472-822 | Jacuzzi® J-400 Series Pillow (2006-2009)
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
$31.50 -
2472-005 | Jacuzzi J-500 Pillow
- Replaces old part #2455-266
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
$40.50 -
6540-164J | Jacuzzi® J-LX®/J-LXL®/J-400 Filter Cartridge (2011+)
- Jacuzzi filter with removeable cap (6541-384) that you can use with the 2890-185 Mineral Purifier.
- 6540-164 J-LX®/J-LXL® Series Filter Cartridge with Cap – 75 sq. ft.
- Jets Pump 1 Cartridge for 2012+ Jacuzzi® J-495, J-425, and J-415 models.
- Replaces filter part #2000-286
$55.50 -
6455-485 | Jacuzzi J-LX/J-LXL Pillow (2011+)
- Jacuzzi J-LX/J-LXL Pillow Replacement
- 2011+
- Snap-in
$34.50 -
2455-105 | Jacuzzi J-300 Pillow (back mount)
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
$25.50 -
2455-104 | Jacuzzi J-300 Pillow (insert only)
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
$27.50 -
2472-826 | Jacuzzi J-300 Series Pillow Base and insert (2007+)
- Genuine Jacuzzi brand part
- Perfect match for your older J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 2455-104 insert
$42.50 -
2472-824 | Jacuzzi® J-300™ Pillow (Pillow Insert & Back Mount)
- Genuine Jacuzzi brand part
- Perfect match for your J-300 series hot tub
- Clear window for headrest lighting
- Contains both the dark grey 2455-105 and the light grey 6455-488 insert
$42.50