Shop
-
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
6455-465 | Sundance® Spas Wrap Around Pillow Without Insert
- Sundance® Spas Wrap Around Pillow
- Compatible with 2001-2008 spa model
- Does not come with the insert pillow (part #6455-472)
- Does not come with the mounting screws (part #6570-231)
$59.95 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
6472-540 | Sundance® Spas 850 Series Drink Tray 2000-2008
- Sundance Spas drink tray used on spas manufactured from 2000-2008
- Installation on top of the filter lid
- OEM part #6472-540
$48.00 -
6472-682 | Sundance® Spas 880 Series Drink Tray 2009+
- Sundance Spas drink tray used on spas manufactured 2009+
- Installation on top of the filter lid
- OEM part #6472-682
$42.50 -
6472-839 | Sundance Wrap Around Gray Pillow 1998+
- Wrap around pillow for Sundance Spas 1998-2000
- Includes 3 suction cups
- Formerly OEM part #6455-447
$79.99 -
6473-249S | Sundance® 680™ Microclean Mini Filter Outer
- Microclean Mini Filter (OUTER ONLY)
- Outer pleated filter removes large debris
- Lasts up to 12 months
- Use with only Sundance Microclean Mini Inner Filter
$84.50 -
6473-283S | Sundance® 680™ Microclean Mini Filter Inner
- Microclean Mini Filter (INNER ONLY)
- Two stage filtration | Inner spun-bound microfiber filters the smallest particles
- Inner spun-bound microfiber filters the smallest particles
- Lasts for up to 4 months
- Use with only Sundance Microclean Mini Outer Filter
$46.50 -
6473-446 | Sundance® 680™ Series Pillow 2023+
- Sundance 680 Series Replacement Pillow 2023+
- OEM #6473-446 (6455-038)
- For compatibility, see production description below.
- Warranty: Covered up to the day of delivery or installation
$59.50 -
6541-468S | Sundance® 680™ Pleated Filter
- Pleated filter with large surface area captures more debris
- Lasts up to 12 months
- Pleatco & Sundance OEM 6473-468S
- Can substitute 6473-249S & 6473-283S
- Can substitute 6541-460S
$79.50 -
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
Dirty Duck Scum Sponge
- Prevents scum line formation
- Removes oils and lotions in the water
- Absorbs 40x its weight in oils, lotions, and cosmetics
$7.95 -
Hot Tub Things 281 Microban® Filter 2-pack (Compatible 10-00281, Wellspring 18 Coreless, Pleatco PBF17 PBF17-M)
- Newest filter addition to our Hot Tub Things family!
- Comparable to the Wellspring 281 filter for Bullfrog Spas®
- 2 Premium high-quality filter cartridges | Easy to Clean Microban Pleats | Powerful & Efficient Performance
- Includes two 281 filters per package
- STIL Series Spas 2018 – Present
- STIL Series Spas from | 2015-2017 | you will need to purchase a Filter Cage Core Assembly (part #10-00417)
- Compatible to Wellspring 281, Wellspring 18 Coreless, Pleatco PBF17, PBF17-M
$73.50 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10 -
UltraLift Foam Grip
- Original factory replacement Ultralift foam grip
- Easy to remove and easy to replace
- Standard UltraLift lifter systems utilize quantity=2
- OEM #L831
$14.50 -
-
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
Cover Locks Center-Release Buckles (set of 4)
- Center or push-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
- Jacuzzi / Sundance part #6475-004
$20.75 -
Cover Locks Side-Release Buckles (set of 4)
- Side or pinch-release buckle style
- Includes 4 replacement buckles, mounting screws, keys
- OEM 5250
$20.75 -
Floating Duck Toy
- These cute ducks are sure to be a hit with any spa lovers of all ages.
- Make bath and spa time, fun!
- Randomly picked duck each time!
- Collect the entire family!
$4.00 -
Great Start Pre-filter
- Attaches to the end of any garden hose.
- Extends filter life.
- Removes solids from the water.
- Reduces hard mineral deposits.
- Easier to balance chemicals from the start.
$21.50 -
Hot Tub Things 282 Microban® Filter 2-pack (Compatible with Bullfrog Spas® 10-00282, Wellspring 30 Coreless, Pleatco PBF40 PFB40M, Filbur FC-9900)
- Newest filter addition to our Hot Tub Things family!
- Comparable to the Wellspring 282 filter for Bullfrog Spas®
- 2 Premium high-quality filter cartridges | Easy to Clean Microban Pleats | Powerful & Efficient Performance
- Includes two 282 filters per package
- Fits A Series, R Series, and X Series spas (2018 to present)
- A Series, R Series | 2013-2017 | you will need to purchase a Filter Cage Core Assembly (part #10-00417)
- Compatible to Wellspring 282, Unicel 8CH-950, Filbur FC-0536, Pleatco PBF50
$75.00 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$35.99$53.50 -
Pool & Spa Floating Thermometers
- Tether included
- Shows degrees in both Fahrenheit and Centigrade
- Non-toxic liquid
$18.50 -
Replacement Key & Screw pack for Cover Buckles
Manufacturer: Core Covers & Essentials
Components: 4 generic keys / 12 mounting screws
Compatibility: Center-Release buckles / Side-Release buckles / M-Series buckles
$2.50
