-
100004 | Covermate I | Left & Right Pivot Arm
- Designed for the Leisure Concepts – Covermate I system
- Arm is interchangeable as the left or right side
- OEM part #100004
$55.00 -
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$29.99 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$0.99 -
100503 | Covermate III Plastic – Left Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the left side mounting bracket
- OEM part #100503Covermate III Plastic Installation Instructions
$54.50 -
100504 | Covermate III Plastic – Right Mounting Bracket
- Designed for the Leisure Concepts – Covermate III Plastic system
- Standing in front of your spa (the cover folding away from you), this would be the rightside mounting bracket
- OEM part #100504
$54.50 -
101510 | Compression Damped Non-locking Shock 75#
- Replacement compression damped non-locking shock – lift. 75 lb.
- OEM #101510from Leisure Concepts
- Replaces old part #100245
- To see if your lifter is compatible, visit https://leisureconcepts.com/installation-instructions/
$36.75 -
Compression Damped Locking Shock 75# | 101632
- Replacement locking shock/strut for CoverMate 3 spa cover lift. 75 lb.
- Features red button type locking mechanism.
- OEM #101632 from Leisure Concepts
$39.99 -
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75 -
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75 -
CoverMate Foam Grip 100002
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Comes as a set of 1 (1 foam grip)
- OEM #100002
$13.99 -
CoverMate Towelmate 100008
- Compatible with the Covermate I, Covermate II, Covermate III, etc.
- Does not include mounting screws
- OEM #100008
$13.99 -
DuraStep II (Portabello)
THE BEST ENTRY-LEVEL STEP IN THE INDUSTRY
The DuraStep II delivers the best entry level price point with features beyond its price tag such as stylish design, strong construction and easy assembly.
$90.99$115.00 -
FROG® @ease® for Jacuzzi Hot Tubs Upgrade Bundle
Time to finally upgrade your Jacuzzi Hot Tub with the FROG® @ease® system!
Bundle includes:
$82.95 -
Hot Tub Things 282 Microban® Filter 2-pack (compatible with Bullfrog Spas® 10-00282 | Wellspring 282)
- Newest filter addition to our Hot Tub Things family!
- Comparable to the Wellspring 282 filter for Bullfrog Spas®
- 2 Premium high-quality filter cartridges | Easy to Clean Microban Pleats | Powerful & Efficient Performance
- Includes two 282 filters per package
- Fits A Series, R Series, and X Series spas (2018 to present)
- A Series, R Series | 2013-2017 | you will need to purchase a Filter Cage Core Assembly (part #10-00417)
- Superior replacement to Wellspring 282, Unicel 8CH-950, Filbur FC-0536, Pleatco PBF50
$77.99 -
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50 -
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$53.50 -
Sundance / Jacuzzi Flow Switch 6560-860
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$48.75 -
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$1.75 -
Hot Tub Things FROG® @ease® Starter Kit for Bullfrog Spas
- Time-release chlorine means stable water chemistry
- Use less chlorine with Frog minerals
- Each SmartChlor cartridge lasts for up to six weeks
- Complete kit offers everything for switching from traditional chlorine to Frog @ease
- Full instructions included on waterproof card
$92.50 -
Hot Tub Things Filter (compatible with Sundance® 6473-164)
- Replacement for Sundance Spas Microclean Inner Filter 6473-164
- Inner Filter is used on Sundance Spas 880 Series and 850 Series
- Inner Filter used with 6473-165 Outer Filter
- 100% compatible with Sundance Spa Parts and Filters
- Height: 18.74″ Diameter: 5.63″
$32.99 -
Hot Tub Things Filter (compatible with Jacuzzi® 6000-383)
- FULLY COMPATIBLE | The replacement filter fits perfectly in most modern J-300 series hot tubs, so you can purify your residential hot tub while saving money over name-brand Jacuzzi filters
- SUPERIOR FILTRATION | The pleated filtration fabric exposes the maximum surface area (60 sq ft) to your water flow
- SUITABLE FOR ALL CHEMISTRIES | The filter is compatible with bromine, chlorine, UV-ray, and the ProClear mineral sanitizer (sold separately)
$39.99 -
Hot Tub Things Filter (compatible with Sundance® 6473-165)
Please Note: This is an outer filter only. Doesn’t include Hot Tub Things 6473-164 inner filter cartridge
- This is the OUTER FILTER ONLY. Doesn’t include Hot Tub Things 6473-164 inner filter cartridge. Again this doesn’t include the inner filter cartridge. You’ll have to buy the inner cartridge as well for a proper fitting in the spa.
- Works with: Sundance Spas 880 Series year 2009 +
- Works with: Sundance Spas 850 and 880 Series years 2005-2008
- Fits all Sundance Maxxus 2009 +, Optima 2009 +, Cameo 2009+, Majesta 2009 +, Altamar 2009 +, Marin 2009 + and Capri 2009+
$55.99 -
Hot Tub Things Filter (compatible with Sundance® 6540-488)
Full list of compatible Sundance spas:
-
-
- 2005–2008 Sundance 850 Spas
- 2005–2008 Sundance 880 Spas
- 2009 and later Sundance 880 Spas
- All 2016 and later 980 Sundance Spas
-
$65.99 -
