Shop
-
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
- Connector Type – Curled Fingers
- Sensor Diameter – 3/8″
- Wire Count – 2 wire
- Wire Length – 12ft
- Sundance & Jacuzzi OEM Part #6600-166
$25.50 -
SpaGuard Brominating Concentrate 6 lb
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$77.99 -
SpaGuard Brominating Concentrate 2 lb
- Add granular pellets into spa while pump is running.
- pH Neutral so it will not change the pH levels of your spa.
- eliminates odors and other compounds.
$27.99 -
6455-488 | J300 2014+ Pillow (Front Insert)
- 6455-488 Jacuzzi Pillow Front Insert
- NOTE: This is the front insert only
- Does not include pillow back mount #2455-105
- For Jacuzzi J-300 models 2002 and later.
$19.95 -
100029 | CMIII Left Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the right side support arm
- OEM part #100029
$60.00 -
100028 | CMIII Right Support Arm
- Designed for the Leisure Concepts – Covermate III system
- Arm is not interchangeable with the left side support arm
- OEM part #100028
$60.00 -
100561 | Covermate I Sundance Right Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the right side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100562
$75.00 -
100561 | Covermate I Sundance Left Bracket
- Designed for the Leisure Concepts – Covermate I Sundance version
- Comes with only the left side bracket
- Left & Right Side brackets are not interchangeable
- System is Sundance branded but not exclusive to Sundance Spas
- OEM part #100561
$75.00 -
100269 | Covermate I Sundance Bracket Kit
- Designed for the Leisure Concepts – Covermate I Sundance version
- Arm is interchangeable as the left or right side
- OEM part #100269
- Comes with left & right bracket, screw kit, 1 towelmate
$125.00 -
SmartStep Jr (Black)
- Manufactured by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Includes a single SmartDrawer
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$99.00 -
SmartStep (Coastal Grey)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Black)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
SmartStep (Portabello)
- Manufacturered by Leisure Concepts
- Slip-resistant rubber tread is safe and soft to the feet
- Locks together in seconds
- Unique patented reversible tread design can accommodate round and square spas
$169.00 -
CoverCatch
- The simple solution to cover storage
- Requires just 10 inches of clearance behind the spa
- Powder-coated aluminum tubing with easy-to-install, non-corrosive mounting brackets
- Works well on most smaller spas regardless of shape
- Lifter system sales are final sale
$329.85 -
CoverShelf
- Shelf arms fold flat against spa when not in use
- Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting bracket
- Works well on most unconventional shaped spas
- Lifter system sales are final sale
$199.00 -
CoverMate Freestyle
- The cover lift solution for round and uniquely shaped spas
- Adjustable mounting base that slides beneath the spa
- Requires approximately 20 inches of clearance behind the spa
- Positions cover away from the spa allowing full use
- Lifter system sales are final sale
$299.00 -
CoverMate III
- Ergonomically designed for ease of use
- Locking shock prevents unintentional closure
- Made in the USA
- Not compatible with round spa
- Lifter system sales are final sale
$399.00 -
CoverMate II
- Allow the open cover to rest in a lower position for a slightly less-obstructed view.
- Mounting system: screw-mounted low on the spa
- Made in the USA
- Not compatible with round spas
- Lifter system sales are final sale
$399.00 -
CoverMate I
- Step up your cover lift with the CoverMate I – Sundance Spas.
- Highest quality and most sold cover lift on the market.
- Sundance version with aluminum mounting brackets
- Lifter system sales are final sale
$325.00 -
Bullfrog Snapcap Clip (2005-2012) | 60-1073
- Model years used: 2005-2012
- OEM part #60-1073
$18.50 -
Snapcap Assembly w/ Clips (2020-current) | 60-1470
- Includes: 2x 60-00085 (snapcap, clip, hidden) & 1x 60-01432 (A-series, snapcap)
- Fits A-Series Spas
- Color: Black
$75.50 -
Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50 -
100150 | Safe-T Rail Foam Grip
- Compatible with Leisure Concepts Products
- Comes as a set of 1
- OEM #100150
- Length = 19.5 inches
$25.00 -
Hydropool Filter 4520007 (Pleatco #PRC50)
Description: 50sqft Dual Core Filter w Removable Core
Hydropool part #4520007
Pleatco part #PRC50
Hydropool model compatability: 12FX AquaPlay
$63.50 -
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10 -
100004 | Covermate I | Left or Right Pivot Arm
- Designed for the Leisure Concepts – Covermate I system
- Arm is interchangeable as the left or right side
- OEM part #100004
$48.95 -
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50 -
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$27.50 -
SpaGuard Spa Sentry 1 qt
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$24.99 -
373045J | Jacuzzi J-200 50 Sq/Ft Filter
- GENUINE JACUZZI HOT TUB PARTS | Manufactured by Jacuzzi
- GUARANTEED COMPATIBLE | compatible with Sundance Spas that use filter 373045S
- CLEAN, CLEAR PERFORMANCE
- Height: 9”, Diameter: 6” 45 square feet of filtration material
$49.50
