-
- Sundance® Spas Wrap Around Pillow
- Compatible with 2001-2008 spa model
- Does not come with the insert pillow (part #6455-472)
- Does not come with the mounting screws (part #6570-231)
$59.95
-
- Accompanies the FROG Serene and Frog @ease Sanitizing Systems or Frog Serene and Frog @ease In-Line Systems
- Helps the chlorine dissolve faster
- Use FROG Jump Start after balancing the water
- Use before using your FROG Sanitizing System
- One packet works in spas up to 500 gallons
$61.75
-
- No assembly, easy installation – one prefilled stick easily fits into the filter, where it works for 4 months
- Filter Mate contains FROG Sanitizing Minerals, which work together with chlorine or bromine to kill bacteria 2 ways, giving you more peace of mind
- FROG Sanitizing Minerals lower chlorine or bromine use up to 50%* and help keep the water clean and crystal clear
- Turns ordinary hot tub water into Fresh Mineral Water, its Cleaner, Clearer, Softer and Easier to take care of.
$35.75
-
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
$10.50
-
- Sundance® Spas Short AquaTerrace Waterfall Trough
- OEM part #6540-060
- Sundance Spas only
- Compatibility below
$34.75
-
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
$1.10
-
- Manufactured by King Technology
- Size: 50 test strips
- Measures Chlorine / Bromine levels, pH and Hardness
- Can be used with any Fresh Mineral Water products from FROG®
- Can be used with other non-FROG® sanitizing system
$13.50
-
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
$24.50
-
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
$31.50
-
- Controls pH in one easy step
- Establishes proper PH and prevents pH drift
- Softens hot tub water by removing calcium
- Enhances water clarity
$24.99
-
- GENUINE JACUZZI HOT TUB PARTS | Manufactured by Jacuzzi
- GUARANTEED COMPATIBLE | compatible with Sundance Spas that use filter 373045S
- CLEAN, CLEAR PERFORMANCE
- Height: 9”, Diameter: 6” 45 square feet of filtration material
$46.50
-
- Multi-purpose shock with four benefits in one: shock, clarifier, flocculent and pH buffer
- Restores water sparkle and removes unpleasant odors
- Treat and soak in as soon as 15 minutes*
- Compatible with chlorinated or brominated spas and those using ozone or ionization systems
$53.99
-
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
$2.50
-
- The Pool FROG system creates Fresh Mineral Water®∞ that kills bacteria 2 ways
- FROG minerals and a small amount of chlorine
- Reduces chlorine use up to 50%
- Requires no daily dosing, eliminates smelly chlorine odors and invites loads of fun
$112.95
-
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
$23.75
-
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
$34.75
-
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
$50.50
-
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
$53.50
-
- Compatible with most recent Sundance Spas in the 880 series
- INSTALLS EASILY | No tools required
- FLEXIBLE SEATING | Add a “halfway” seat for younger bathers, or remove the cushion quickly to fill the tray with drinks and ice
$99.75
-
- Pillow: 2019+ 980 Series (Lisbon only)
- Replaced 6455-024
$38.99
-
- OEM ball and socket Sundance Sweetwater pillow
- Sundance Sweetwater Spas replacement pillow
- Replaces 6455-451
$35.50
-
- Sundance 680 Series Spas Replacement Pillow
- Ball socket, contoured fit over spa lip, classic dimple massage texture, Sundance logo
- Replaces 6455-474
$35.50
-
- 780 Series Pillow April 2017+
- Replaced 6455-502
$36.50
-
- Select Series 2018
- Replaced part #6455-008
$33.50
-
- Sundance® Spas 880 Series 2019+
- Not used in the 2018+ Marin or Cambria 880 Series
- Replaced 6455-025
$37.50
-
- Wrap Around Pillow for 1986-1997 SUNDANCE® Spas
- “suction cup” style pillow which replaced older “ball and socket” style pillows
- OEM Sundance part #6455-423
$77.75
-
- Aftermarket Seat Pillow converts lid into functional seat
- only works with OEM Acrylic lid for 2018 & 2019 Marin/Cambria
- Fits Into Integrated Beverage Concierge
$81.25
-
- 472-968 formerly 6455-455, Sundance Pillow, 2005+ 780 Speaker Pillow
- Updated Pillows have Sundance Spas logo – some remaining inventory may have the Sweetwater logo.
- Does not include the Bracket Mount. Use with 6455-500, Pillow Mounting Bracket.
$38.50
-
- Pillow for Sundance 980 Series Spas (Replaced 6455-501)
- Fits the 980 series 2016+
- OEM part #6472-736
$35.50
-
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
$33.50
Free shipping when you spend $100 Dismiss