Large Spa Filter Drain Cover | 6540-213
- Mesh material for drain filtering
- compatible with 2004+ Sundance Spas, 2003-2004 Sweetwater Spas, and all Jacuzzi Drains
- 5″ diameter | Elastic band to hold in place
- Large version | Small Version (part #6540-113)
Sundance & Jacuzzi Cabinetry Screws
- Replacement cabinetry / skirt panel screws
- Compatible with Sundance Spas and Jacuzzi Hot Tubs
- Synthetic Panel Screw
- #8 x 1-5/8″ MOD PHD SS
- Use a Robertson #1 square-head bit (sometimes listed as S1 or R1)
Jacuzzi ProClarity Mesh Skimmer Bag | 6570-398
- Trap: Debris attachment (mesh skimmer bag)
- Used on J-500 series, J-400 Series, & J-300 Series (see compatibility below)
- Not compatible with J-200 series
- OEM Jacuzzi part #6570-398
- 10 holes on the top | 1 hole on the bottom
6455-007 | Jacuzzi Pillow (oval) Insert
- Jacuzzi Pillow Insert 6455-007 for non-lit (lighting) systems
- OEM part #6455-007
- For Jacuzzi 300 Series (2002+)
373045J | Jacuzzi J-200 50 Sq/Ft Filter
- GENUINE JACUZZI HOT TUB PARTS | Manufactured by Jacuzzi
- GUARANTEED COMPATIBLE | compatible with Sundance Spas that use filter 373045S
- CLEAN, CLEAR PERFORMANCE
- Height: 9”, Diameter: 6” 45 square feet of filtration material
SUNDANCE® & JACUZZI® Temp Sensor O-Ring | 6540-228
- OEM part #6540-228
- 0.662″ ID x 0.210″ Ø
- Interchangeable part for both Sundance & Jacuzzi
- Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-551
- Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
- Does not include O-Ring part #6540-228
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
- Sundance & Jacuzzi Temperature sensor
- OEM part #6600-751
- This has a 3-pin connector
- Does not include O-Ring part #6540-228
Sundance / Jacuzzi Flow Switch 6560-860
- Sundance Spas Flow Switch with Bypass
- Flow Switch with transparent tee 3/4″ barb with a 3/8″ barb off the side
- 3/4″ barb replaces part # 6560-858
- OEM part #6560-860
Marlig Industries – Fix A Leak 32 oz.
- Designed to seal leaks in virtually any material
- Leaks in the shell and works equally well in plumbing
- Proven to seal holes 1/8 in. in diameter – sealant
- Safe to use on salt chlorine generators, pumps, heaters, and filters!
Jacuzzi J-200 Series Pillow 6455-468
- Jacuzzi J-200 Series Pillow
- Formerly part #6455-457
- Single snap in post back center of the pillow headrest
- Similar to 2472-828 pillow
Jacuzzi HydroSoothe Pillow Assembly 2472-136
- Jacuzzi J-300 Hydrosoothe Pillow Assembly
- Jacuzzi J300 manufactured in 2020
- Pillow comes with the back fitting
- Part #2472-136
Sundance / Jacuzzi Pillow Attachment Screw 6570-231
- SUNDANCE® Spas, JACUZZI® Hot Tub Spa Pillows Attachment Screw
- part #6570-231
- Plastic attachment screw for pillows.
- SUNDANCE® Spas 2001+
- Sweetwater Spas 2003+
- 2002+ J-300 Series JACUZZI® Spas pillows
Sundance / Jacuzzi Flow Switch 2560-040
- Sundance, Sweetwater, Jacuzzi Spas Flow Switch
- part #2560-040
- Transparent Tee 3/4 inch barb with s 3/8 inch barb off the side
- Flow Switch now comes molded with a 3/32 inch hole opening
- Do not use on other models such as 800,850, 800 Series that use a square finger connection.
- see spa model compatibility below
Jacuzzi Proclear II Filter 2540-387
- GENUINE JACUZZI QUALITY | This filter is made by Jacuzzi, the same company that made your hot tub
- GUARANTEED COMPATIBILITY | Works with 2006–2012 J-465, J-470, and J-480 hot tubs. See description for more details
- SPECIALIZED FILTRATION | Designed by Jacuzzi specifically for J-400 series hot tub
Jacuzzi Filter Cartridge 2540-381J
- GENUINE | Enjoy the peace of mind that comes from Jacuzzi quality water filters
- EFFECTIVE | Woven filtration protects your water, your family, and your equipment from harmful dirt and particles
- DURABLE | The 2540-381J filter can withstand repeated washing and rinsing with an approved cartridge cleaner (sold separately), so you can get maximum life out of your purchase
- ECONOMICAL | Replace the filter regularly to protect the pumps and plumbing of your hot tub
Sundance / Jacuzzi Replacement Quartz Tube 6472-859
- GENUINE CLEARRAY | This genuine ClearRAY tube is made by Sundance Spas, part # 6472-859
- GUARANTEED COMPATIBLE | Tube fits CLEARRAY XL bulbs in both Sundance Spas and Jacuzzi-brand hot tubs
- CRYSTAL CLEAR | The pure mineral quartz of this tube provides optimal light pass-through so you get maximum UV sanitation efficiency
- INSTALLATION KIT | Comes with latex glove (fingerprints can shorten system life) and complete instructions
- As of Summer 2019, an O-ring is not included with the replacement tube.
Jacuzzi J-215/J-225 Pillow 2472-831
- Pillow Headrest with two snaps for Jacuzzi J-225 and J-215 only
- 2016+ Model Years
- This pillow replaces old pillow part #6455-487
Jacuzzi J-400 Pillow 2472-007
- OEM Jacuzzi® replacement headrest pillow for select J400 Collection Hot Tubs.
- Jacuzzi part #2472-007 (replaces old part #6455-031)
Jacuzzi Pillow (insert only) 2455-104
- Official Replacement Jacuzzi Pillow, part # 2455-104
- Does not include back mount pillow (2455-105)
- Will fit all Jacuzzi J-300 Series spas 2002-Current.
- Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
- Designed for Jacuzzi J-300 Series Hot Tubs 2007–2013, also fits earlier models
Jacuzzi Pillow (back mount) 2455-105
- 2455-105 Jacuzzi Pillow Base Back Mount.
- NOTE: This is the mount only.
- Does not include pillow insert part #2455-104 (pillow insert with LED logo)
- Does not include pillow insert part #2455-007 (pillow insert with LED logo)
- For Jacuzzi J-300 models 2002 and later.
Jacuzzi J-500 Pillow 2472-005
- Fits 2015+ JACUZZI®® models J-585 & J-575
- Replaces old part #2455-266
- 4 Total pillows on spa
- Measures 11-1/2″ x 5″
- Backside has 2 Pegs 5-3/8″ apart
Jacuzzi Pre-2002 Filter 2540-380
- Genuine Jacuzzi Part, guaranteed quality and compatibility
- Compatible with JWB and Echo spas, 2001 and older hot tubs
- 25 square feet of filtration material for clean, clear water
Jacuzzi Proclear Filter 6000-383 (2-pack)
- This 2-pack will make it easier to switch out both filters at the same time!
- Diameter: 6 3/4″ Length: 15 1/2″ Bottom: 2″ SAE thread
- Genuine Jacuzzi Parts
- Twist off cap accommodates PROCLEAR Mineral Spa Sanitizer
- Filtration Area: 60 SQ FT
- Cartridge lasts up to 18 months with routine care
*New part number 6000-383AJ* is the same as old part number 6000-383$109.50
Jacuzzi J-400 Pillow 2472-822
- J-400 Collection headrest for 2006 through mid-2009 models.
- This is for units without the LED light behind the headrest.
- Does not include pillow slider part # 2570-401.
Jacuzzi J-LX®/J-LXL® Filter Cartridge 6540-164J
- Jacuzzi filter with removeable cap (6541-384) that you can use with the 2890-185 Mineral Purifier.
- 6540-164 J-LX®/J-LXL® Series Filter Cartridge with Cap – 75 sq. ft.
- Jets Pump 1 Cartridge for 2012+ Jacuzzi® J-495, J-425, and J-415 models.
- Replaces filter part #2000-286
Jacuzzi J-460 Filter 2540-384
- GENUINE JACUZZI | Filter is made by the same company that made your hot tub, so you know it will work perfectly
- 25 SqFt AREA | The tight pleating exposes maximum surface area so the filter can hold more debris
- FOR J-400 HOT TUBS | This is a Jet Pump filter for J-460 and J-465 hot tubs only
Jacuzzi Proclear II Filter 2540-383J
- Jacuzzi part 2540-383J
- 19” tall, 6” diameter, 2.38” hole
- Genuine Jacuzzi quality
- 75sqft filtration material to protect your spa’s machinery from particles and debris
- See compatibility list below
Jacuzzi Proclarity Depth Load Filter 6473-158
- Microfiber media traps the smallest particles deep in the filter core and does not release them, giving you crystal clean water.
- Best level of filtration available. Cleans finer particles for clearer water
- Jacuzzi Genuine Part
- Change after 3 months.
- Use with Jacuzzi Filter 6473-161 for 2012 models of J-480, J-470, and J-465