Hot Tub Things pH and Alkalinity Up (1 lb)

$12.50
0 watching this item.

Hot Tub Things pH and Alkalinity Up (1 lb)

Brand: Hot Tub Things™ SKU: 185-016017S12
$12.50
  • PROPER BALANCE: Keep hot tub water in check – this product increases pH and Alkalinity to obtain the proper balance!
  • PUREST CHEMICALS AVAILABLE: Formulated Exclusively for Hot Tubs And Made from the Purest Chemicals Available
  • #1 TRUSTED BRAND: Hot tub things is America’s #1 Trusted Brand of Hot Tub Chemicals. Try us!
  • MULTIPLE BENEFITS: The product raises low pH to prevent corrosion, optimize sanitizer effectiveness, reduce eye irritation.
  • GUARANTEED PERFORMANCE: Safety Tested to Assure Quality, Guaranteed Performance
  • MAINTAIN OR INCREASE YOUR PH: Add the appropriate amount of product to maintain the pH level or raise the level up
0 LEFT IN STOCK

Product Description

  • PROPER BALANCE: Keep hot tub water in check – this product increases pH and Alkalinity to obtain the proper balance!
  • PUREST CHEMICALS AVAILABLE: Formulated Exclusively for Hot Tubs And Made from the Purest Chemicals Available
  • #1 TRUSTED BRAND: Hot tub things is America’s #1 Trusted Brand of Hot Tub Chemicals. Try us!
  • MULTIPLE BENEFITS: The product raises low pH to prevent corrosion, optimize sanitizer effectiveness, reduce eye irritation.
  • GUARANTEED PERFORMANCE: Safety Tested to Assure Quality, Guaranteed Performance
  • MAINTAIN OR INCREASE YOUR PH: Add the appropriate amount of product to maintain the pH level or raise the level up

The Power of pH and Alkalinity Up

Hot Tub Things pH and Alkalinity Up is the perfect solution to increase your hot tub water's pH level as well as alkalinity. For best results, maintain your water's pH level at 7.2 to 7.8. The total alkalinity of spa water should be maintained between 80 and 150 ppm as determined by a suitable test kit.

Use: pH and Alkalinity Up should be used as necessary when pH is below 7.2.

Note:
 For best results, dissolve granular products first by adding to a small, plastic pail filled with water. Then, apply the solution to the spa water.

  1. Determine amount of pH and Alkalinity Up to use.
  2. Make sure equipment is OFF.
  3. Add applicable amount of pH and Alkalinity Up to the spa water.
  4. Turn on circulation system for 1-3 hours.
  5. Retest water after 3 hours.
  6. If pH is still below 7.2, repeat steps 1-5.

    Product Specification

    Weight
    Dimensions N/A