TEAR-AID Repair Patch: Vinyl Type B

$10.95

Tear-Aid expands absorbing force on impact and always returns to original shape and size. This flexibility allows the patch to conform to irregular surfaces without restricting the movement of the repaired material. Vinyls have oils that are absorbed by most adhesives which causes the adhesive to turn gooey, gummy, and ultimately lose bond. Tear-Aid vinyl repair patches contain an inhibitor that blocks the oils found in vinyls resulting in a long lasting repair.

Product Description

TEAR-AID repairs holes & tears instantly. The elastic patch that won't pull off when stretched. TEAR-AID's unique airtight, watertight, elastic composition stretches and recovers absorbing the force that causes ordinary repair products to be torn off.

Sticks to Vinyl and Vinyl-Coated Materials:
• Won't discolor over time.
• Cuts easily to any size with scissors.
• No sewing.
• Won't turn gummy in high heat.
• Stretches and springs back without losing its grip.
• Functions in temperature ranges of -20ºF - 190º F after application.

TEAR-AID type B has a unique adhesive that resists the oils in vinyl that causes other adhesives to soften and turn gummy in sunlight.

Kit Includes:
(1)  7/8" square patch.
(1)  3/8" square patch.
(1)  12" Reinforcement Filament for repairing tears at edges.
(1) 3" x 12" TEAR-AID patch - cuts with scissors to any size.

Product Specification

Brand	TEAR-AID
SKU	ES-6420
Dimensions	5.5 x 3.0 x 1.260 in
Barcode	699337100059
Weight	0.07 lb

Directions

STEP 1. When applying underwater, apply to a smooth non-textured vinyl surface. Almost all pool liners are a good surface. Clean and scrub area larger than where patch is going to be applied to. Do not apply to an uncleaned area. Do not foul patch in a scummy water application. If patch is partially above the water line, clean dry area with alcohol prep pads using the dry application instructions. IT IS IMPORTANT TO SQUEEGEE THE WATER OUT FROM BETWEEN THE PATCH AND THE VINYL.

STEP 2. Cut patch to size with scissors allowing for the patch size to extend 1 inch beyond all edges of the tear. Trim square corners into rounded corners.

STEP 3. Do not foul the patch with your fingers, Carefully peel back ½ inch of paper liner.

STEP 4. Position the patch with the paper liner still on it underwater and anchor exposed ½ inch edge allowing the patch to extend 1 inch beyond all edges of the tear.

STEP 5. Slowly peel back liner while carefully rubbing down with your fingers. DO NOT ALLOW THE PATCH TO WRINKLE. IT IS IMPORTANT TO SQUEEGEE THE WATER OUT FROM BETWEEN THE PATCH AND THE VINYL.

STEP 6. Use a firm squeegee to rub from center of patch outward in all directions firmly. Do not pick at the patch. Full adhesion requires 24 hours.

Find anything you need

TEAR-AID Repair Patch: Vinyl Type B

TEAR-AID Repair Patch: Vinyl Type B

Product Description

Product Specification

Directions

Customer Reviews